Pro-User RVC3620N Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Pro-User RVC3620N (31 pagina's) in de categorie Achteruitrijcamera. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/31
1
WIRELESS BACK-UP CAMERA SYSTEM
KABELLOSES RÜCKFAHR-KAMERA-SYSTEM
SYSTÈME DE CAMERA DE RECUL SANS FIL
DRAADLOOS CAMERA SYSTEEM
with 3,5 inch monitor
mit 3,5” Monitor
avec écran 3,5 pouces
met 3,5 inch monitor
RVC3620N
2
INTRODUCTION
The Pro-User RVC3620N is member of the family of advanced car back-up systems
manufactured by Pro User International Ltd.
The Pro-User Wireless Back-up Cameras and Monitor, when used as described, will
improve your ability to see behind your car, camper, trailer, carvans or mini-van. We
have taken numerous measures in quality control to ensure that your product arrives in
top condition, and will perform to your satisfaction.
Please carefully read and follow the following safety and operating instructions.
IMPORTANT SAFETY INSTRUCTIONS
Before You Install
If you are not confident working with 12 volt DC vehicle wiring, removing and reinstalling
interior panels, carpeting, dashboards or other components of your vehicle, contact the
vehicle’s manufacturer, or consider having the camera system professionally installed.
Interference
This device, as well as all other wireless devices, may be subject to interference.
Interference may be caused by cell phones, Bluetooth headsets, Wi-FI routers, power
lines and other various electrical equipment, etc.
Repair
The camera system should not be opened. Any attempt at modification or repair by the
user will entail the loss of your guarantee.
PARTS
1. Monitor and mounting Arm 2. Camera with mounting plate x 2
3. Transmitter Box x 2 4. Mounting Accessories x 2 5. Monitor Power Cable
6. Transmitter Box Power Cable x 2
3
INSTALLATION
These instructions do not apply to all vehicles. They are only meant as a general
guide due to the number of different makes & models. For vehicle specific
questions contact your vehicle’s manufacturer.
Camera installation
There are several ways to mount the cameras on the back of your vehicle or trailer. But
the most convenient is to mount it near the license plate of the vehicle or trailer.
Supplied are two mounting plates that can be fixed behind the license plate, and the
mounting plates have been installed in the cameras.
The camera is tiltable, camera angle can be adjusted manually on vertical direction. Make
sure that its field of view and detection are not obstructed.
There are two sets of cameras and transmitters, use the same way below to install them
on the vehicle and trailer respectively.
1. Remove the rear license plate, and then loosen the license plate bolts/screws.
2. Position the supplied mounting plate (with camera together) behind the license plate
bracket. Secure both license plate bracket and mounting plates with the license plate
bracket bolts/screws.


Product specificaties

Merk: Pro-User
Categorie: Achteruitrijcamera
Model: RVC3620N

Heb je hulp nodig?

Als je hulp nodig hebt met Pro-User RVC3620N stel dan hieronder een vraag en andere gebruikers zullen je antwoorden