Pro-Ject Tristand Handleiding
Pro-Ject
luidsprekersteun
Tristand
Lees hieronder de 📖 handleiding in het Nederlandse voor Pro-Ject Tristand (2 pagina's) in de categorie luidsprekersteun. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
Tristand
• 3x M8 nuts �
Size without feet (W x D x H): 328 x 328 x 678 mm
Size with feet (W x D x H): 328 x 328 x 700 mm
Top plate surface (W x D): 150 x 142 mm
Weight per Tristand: 5 kg
Maximum load per Tristand: 20 kg
• 1x base plate�
• 2x steel pro les�
(marked no. 1) �• 2x steel pro les�
(marked no. 2) �
• 4x M4x14 allen screws�
• 1x 2,5mm allen key �
• 3x spike feet�
• 3x cups for spike feet�
• 1x top plate�
Before assembly please make sure all parts are included.
Step 1
As shown in the picture below, take the top
plate and one of the two steel pro les �
marked with no. 1 and attach them together.
Screw the top plate and steel pro le together �
(using a M4x14 screw and the included allen
key), but do not tighten the screw completely
yet.
Steel pro le points in that direction�
Step 2
Take another steel pro le now with mark no.2, �
and attach it in the opposite direction to the
previous one into the hole above the rst �
steel pro le (as shown in the picture below). �
Don't tighten the screws completely.
Steel pro le points in that direction�
Steel pro le points in that direction�
Step 3
Repeat step 2 with another steel pro le.�
Step 4
Repeat step 1 with another steel pro le �
marked no. 1 in the same direction as in step
1.
Steel pro le points in that direction�
Step 5
Take the base plate and put it on the steel
pro les from the other side. Align the threads �
with the holes in the base and screw them
together. At rst don't tighten the screws �
completely. Once you have all screws in the
threads, tighten them. Afterwards, also
tighten the screws on the top plate (steps 1 –
4).
Pro-Ject Audio Systems is a division of Audio Tuning Vertriebs GmbH Margaretenstrasse 98, A-1050 Vienna, Austria
Step 6
Screw the nuts onto the spike feet.
Then screw the feet into the base. Carefully
lift the assembled Tristand up, place it on the
ground and put the cups under the spike feet.
You can now tighten or loosen the spike feet
to ensure the base is level (use a spirit level if
necessary).
Step 7
Now you are ready to place the speaker on
the Tristand. You have two options on how to
do that.
1) Directly place the speaker onto the
microporous rubber pads on top plate.
2) Screw the M5x20 spikes into the threads
located in the middle of the microporous
rubber pads. Adjust the height until the
speaker has a proper stand and lock the
screw with a nut from the bottom.
• 4x M5x20 spikes �
• 4x M5 nuts �
Product specificaties
| Merk: | Pro-Ject |
| Categorie: | luidsprekersteun |
| Model: | Tristand |
Heb je hulp nodig?
Als je hulp nodig hebt met Pro-Ject Tristand stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding luidsprekersteun Pro-Ject
21 Februari 2024
Handleiding luidsprekersteun
- luidsprekersteun Philips
- luidsprekersteun JBL
- luidsprekersteun Pioneer
- luidsprekersteun Arcam
- luidsprekersteun Audizio
- luidsprekersteun B-tech
- luidsprekersteun Bose
- luidsprekersteun Definitive Technology
- luidsprekersteun Focal
- luidsprekersteun Hama
- luidsprekersteun HQ
- luidsprekersteun Konig
- luidsprekersteun LD Systems
- luidsprekersteun Monacor
- luidsprekersteun Nedis
- luidsprekersteun Newstar
- luidsprekersteun Peerless
- luidsprekersteun Pyle
- luidsprekersteun Q Acoustics
- luidsprekersteun Renkforce
- luidsprekersteun Sanus Systems
- luidsprekersteun Sennheiser
- luidsprekersteun Tannoy
- luidsprekersteun Toa
- luidsprekersteun Vogels
- luidsprekersteun Vonyx
- luidsprekersteun Jamo
- luidsprekersteun Omnitronic
- luidsprekersteun One For All
- luidsprekersteun Cambridge
- luidsprekersteun Bang And Olufsen
- luidsprekersteun Bowers And Wilkins
- luidsprekersteun Monoprice
- luidsprekersteun Bell'O
- luidsprekersteun Vivolink
- luidsprekersteun Techly
- luidsprekersteun Canton
- luidsprekersteun Sanus
- luidsprekersteun Barkan
- luidsprekersteun Chief
- luidsprekersteun Bogen
- luidsprekersteun Adj
- luidsprekersteun Electro-Voice
- luidsprekersteun Dynaudio
- luidsprekersteun Crestron
- luidsprekersteun Konig & Meyer
- luidsprekersteun Flexson
- luidsprekersteun Ultimate Support
- luidsprekersteun Heckler Design
- luidsprekersteun Kramer
- luidsprekersteun Gravity
- luidsprekersteun Kanto
- luidsprekersteun Multibrackets
- luidsprekersteun Triangle
- luidsprekersteun Adam Hall
- luidsprekersteun Norstone
- luidsprekersteun Roadworx
- luidsprekersteun My Wall
Nieuwste handleidingen voor luidsprekersteun
10 April 2024
3 April 2024
27 Maart 2024
19 Maart 2024
19 Maart 2024
19 Maart 2024
19 Maart 2024
18 Maart 2024
18 Maart 2024
18 Maart 2024