Prier C-144D12 Handleiding

Bekijk gratis de handleiding van Prier C-144D12 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.2 sterren uit 5 reviews. Heb je een vraag over Prier C-144D12 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

4515 E. 139th Street Grandview, MO 64030 | (800) 362-9055 | PRIER.com

Installation, Operation & Maintenance Instructions for the

PRIER C-144/244 Diamond Series Freezeless Wall Hydrant

Please leave this sheet for the property homeowner

Thank you for purchasing the PRIER C-144/244 Diamond Series Freezeless Wall Hydrant, the nest quality

freezeless wall hydrant available. Your C-144/244 will provide you years of dependable service with little or

no maintenance.

1. Determine the location for the installation of the hydrant. The valve must be installed into a heated area of

the structure that won’t drop below freezing. Ensure there is adequate work room in the interior of the struc-

ture for securing the hydrant to the plumbing piping. Bore the hole size listed above through the wall in the

desired position for the installation.

2. All freezeless wall hydrants require a slight downward pitch to aid the draining process of the hydrant once

the product is turned to the “off” position. PRIER has machined an appropriate pitch into the casted back-

ange to assist and ensure that a proper drainage pitch results after installation.

3. Position the spout of the hydrant in the downward position. From the interior of the structure, utilize the date

code on the copper pipe near the inlet. When the code is pointed down, the spout is oriented in the proper

position on the outside of the structure.

4. If you are planning to solder the connection (D, S or F style seats), be certain the hydrant is in the fully open

position to prevent seat damage from the heat. If you are installing using a threaded adapter, hand tighten

until valve is snug, then orient spout in the proper direction. Use a strap wrench if necessary. DO NOT

OVERTIGHTEN.

5. Connect the water supply piping to the freezeless wall hydrant as desired. With a closed-end hose on the

valve creating back pressure, test the installation for leakage.

6. After the water supply connection is made, secure the hydrant to the structure using appropriate screws

through the two mounting holes on the casted back ange.

INSTALLATION

Installation procedures may vary slightly depending on the seat option purchased and the installation inlet

options. PRIER freezeless wall hydrants are available with the following inlet options:

Inlet StyleHole SizeInlet Specications

D1” Hole1/2” MPT x 1/2” SWT

X1” Hole1/2” Crimp PEX

W1” Hole1/2” Wirsbo® PEX

C1” Hole1/2” CPVC

T1 1/8” Hole3/4” MPT x 1/2” FPT

F1 1/8” Hole3/4” SWT

G1” Hole1/2” SharkBite Push-Fit

Y1” Hole1/2” Press-Fit

FX1 1/8” Hole3/4” Crimp PEX

FW1 1/8” Hole3/4” Wirsbo® PEX

Product specificaties