Power Dynamics PD Combo 1200 SET Handleiding

Power Dynamics Speaker PD Combo 1200 SET

Lees hieronder de 📖 handleiding in het Nederlandse voor Power Dynamics PD Combo 1200 SET (15 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
ACTIVE LIVE SET
PD Combo 1200 Set 12"Sub 2x6,5"T
PD Combo 1200 Set 12"Sub 2x6,5"T
PD Combo 1200 Set 12"Sub 2x6,5"T
PD Combo 1200 Set 12"Sub 2x6,5"TPD Combo 1200 Set 12"Sub 2x6,5"Top
op
op
op op
PD Combo 1500 Set 15"Sub 2x8"T
PD Combo 1500 Set 15"Sub 2x8"T
PD Combo 1500 Set 15"Sub 2x8"T
PD Combo 1500 Set 15"Sub 2x8"TPD Combo 1500 Set 15"Sub 2x8"Top
op
op
op op
PD Combo 1800 Set 18"Sub 2x10"T
PD Combo 1800 Set 18"Sub 2x10"T
PD Combo 1800 Set 18"Sub 2x10"T
PD Combo 1800 Set 18"Sub 2x10"TPD Combo 1800 Set 18"Sub 2x10"Top
op
op
op op
Instruction Manual
Gebrauchsanleitung
Manual de instrucciones
Gebruiksaanwijzing
WARNINGS :
Keep the manual for future reference.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all
safety precautions to avoid fire and/or electric shock hazard. All repairs should be carried out by a qualified
technician.
• Prior to using the unit, ask a professional for
advice.
• Hearing damage:
Power Dynamics speakers can produce very high
sound pressure levels (SPL) that can impair the
hearing of users, staff and audience.
• Do not overload the box in order not to damage
the speakers.
• The unit contains voltage carrying parts. DO NOT
open the unit.
• When unplugging the unit from the mains, always
pull the plug, never the chord.
• Never plug/unplug the mains plug with wet hands.
• If the plug and/or the mains lead are damaged,
they need to be repaired by a qualified technician.
• If the unit is damaged to an extent that internal
parts are visible, do not plug the unit into a mains
outlet and do not switch it on. Contact
immediately your dealer.
• Repairs should only be carried out by a qualified
technician.
• Only connect the unit to an earthed 220-
240Vac/50Hz mains outlet protected by a 10-16A
fuse.
• Keep away from heat sources and vibration.
• During a thunderstorm or if you don’t use the unit
for a longer period of time, unplug it from the
mains
• If the unit has not been used for a longer period of
time, condensation can occur inside the housing.
Please let the unit reach room temperature prior
to using it.
• To avoid accidents in public premises, the legal
requirements must be fulfilled and instructions/
warnings must be adhered to.
• Place the boxes on a stable surface.
• Place the speaker stand on a flat, stable surface
• Only use speaker stands that are suitable for the
weight of the speaker and never place more
speakers than allowed on a stand.
• Use an appropriate means of transport to move
the box – BEWARE OF YOUR BACK!!
• Keep out of the reach of children
• All volume controls must be set to zero prior to
switching the unit on.
• Do not use cleaning sprays for the slider controls.
The residues of these spray cause dust deposits
in the controls. If a problem occurs, please
consult a specialist.
• Always handle the unit with clean hands.
• Do not use force to adjust the controls.
• Do not clean the unit with chemical solutions. This
might damage the finish. Only use a dry cloth for
cleaning.
• Do not place the unit near electronic devices that
might cause interference.
• Only use original spares for repairs to avoid
damage and/or exposure to dangerous radiation
• Switch the unit off prior to plugging/unplugging the
unit or to moving the unit to another place.
• Make sure that the mains lead cannot be
damaged and nobody can walk on it.
• If you travel with the unit to another country make
sure that the mains voltage is suitable.
• Keep the packaging so that you can transport the
unit safely and without damage.
This marking attracts the attention of the user to dangerous voltages inside the housing that are of
sufficient amplitude to cause a shock hazard.
This marking attracts the attention of the use to important safety instructions contained in the manual or on
the product that must be adhered to.
CONTENTS OF THE CARTON:
• Subwoofer with built-in stereo amplifier
• 2x Top (top) speakers
• Mains lead
FEATURES AND FUNCTIONS:
• Built-in high power subwoofer
• High power 2.1 Amplifier
• 2x XLR line inputs
• 2x XLR high pass line output
• 2x XLR loop trough output
• Subwoofer level control
• Top-speaker level control
• Temperature controlled fan
• Phase switch (0-180°)
• Attached wheels
CONTROLS AND FEATURES:
1. LIMIT INDICATOR
This indicator will blink on occasion when the built in limiter is active.
NOTE: If the indicator glows or starts to blink frequently, you should turn down the Subwoofer
Level.
2. SIGNAL INDICATOR
This indicator will glow when there is a signal received to the FULL RANGE input.
3. SUBWOOFER GAIN CONTROL
To regulate the output level of the subwoofer. Use this to set the balance between the speakers
and subwoofers.
4. PROTECT INDICATOR
This indicator will begin to glow when the subwoofer goes into protect mode and all output will
stop. This will prevent the subwoofer amplifiers from getting too hot and will protect all speakers
connected.
5. POWER LED
LED lits when you switch on the power.
6. HIGH PASS XLR OUTPUT
These outputs are used to send the incoming signal to a full range active speaker or power
amplifier.
7. PHASE SWITCH
This switch reverses the polarity of the subwoofer. Experiment (placement of the subwoofer
relative to the speakers) with all speakers to find the best sound.
8. FULL RANGE XLR INPUTS
Are designed to accept a line input signal from a mixer or other line devices with a balanced jack.
Use balanced cables in order to prevent signal loss. ONLY USE LINE LEVEL INPUT DEVICES.
9. THRU (FULL RANGE OUTPUTS)
Are used to send the signal from FULL RANGE INPUTS to another device.
10. TO SATELLITE SPEAKER OUTPUT
Gain controllable outputs to connect passive speakers.
11. SATELLITE SPEAKER GAIN CONTROL
To regulate the output level of the stereo signals.


Product specificaties

Merk: Power Dynamics
Categorie: Speaker
Model: PD Combo 1200 SET
Kleur van het product: Zwart
Stroombron: AC
Bluetooth: Nee
Aan/uitschakelaar: Ja
Connectiviteitstechnologie: Bedraad
Gemiddeld vermogen: 600 W
Aanbevolen gebruik: Universeel
Gemiddeld vermogen subwoofer: 400 W
Audio-uitgangskanalen: 2.1 kanalen
Diameter driver subwoofer (imperiaal): 12 "
Peak Music Power Output (PMPO): 2400 W
Totale harmonische vervorming (THD): 0.03 procent
Subwoofertype: Actieve subwoofer
Gewicht subwoofer: 28600 g
Subwoofer afmetingen (WxDxH): 500 x 370 x 453 mm
Aantal satellieten: 2
Gemiddeld vermogen satelietluidsprekers: 100 W
Satellite speaker afmetingen (WxDxH): 190 x 200 x 375 mm
Satellite speaker gewicht: 6200 g
Impedantie satellietluidspreker: 8 Ohm
AC-ingangsspanning: 220-240 V
AC-ingangsfrequentie: 50 Hz
AirPlay: Nee
Satellietspeaker gevoeligheid: 134 dB
Piek vermogen satteliet luidspreker: 400 W
Freqentiebereik satellietluidspreker: 42 - 20000 Hz
Diameter hogetonensatellietluidspreker: 6.5 "

Heb je hulp nodig?

Als je hulp nodig hebt met Power Dynamics PD Combo 1200 SET stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Power Dynamics

Handleiding Speaker

Nieuwste handleidingen voor Speaker