Power Dynamics BD50TW Handleiding

Power Dynamics Speaker BD50TW

Lees hieronder de 📖 handleiding in het Nederlandse voor Power Dynamics BD50TW (5 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5

BD Series In/Outdoor IP65 Speaker 100V

Ref. nr.: 952.126, 952.128, 952.130, 952.132

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.3

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original

factory box and packing.

If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.

MOUNTING THE SPEAKER

See back of the manual for detailed illustrations.

Step 1: Unscrew both bolts that secure the bracket to the speaker.

Step 2: Attach the bracket to a suitable surface.

Step 3: Screw both undone bolts back in, securing the speaker to the bracket.

Step 4: Pull o the left side rear cover to expose the connector terminal. Connect the speaker to the output of the amplier

(Black = negative pole / Red = positive pole).

Make sure the audio system is turned o ( select N/C on rotary switch; Step 5) before making any connection. and

Step 5: Pull of the right side rear cover to expose the rotary selection switch. Adjust the rotary switch to 70V/100V or 8Ω

position (for directly operating the speaker at a low-impedance amplier output). When connecting several speakers, make sure

that all speakers have the same polarity and that the amplier is not overloaded.

Connection examples

100V examples:

8Ohm examples:

Product specificaties

Merk:	Power Dynamics
Categorie:	Speaker
Model:	BD50TW
Kleur van het product:	Wit
Gewicht:	3200 g
Breedte:	170 mm
Diepte:	160 mm
Hoogte:	260 mm
Connectiviteitstechnologie:	Bedraad en draadloos
Gemiddeld vermogen:	30 W
Aantal per verpakking:	1 stuk(s)
Aanbevolen gebruik:	Universeel
Impedantie:	8 Ohm
Geschikt voor buitengebruik:	Ja
Audio-uitgangskanalen:	- kanalen
Speaker plaatsing:	Muur-montage
Aantal drivers:	1
Woofer:	Ja
Frequentiebereik:	20 - 20000 Hz
Gevoeligheid:	86 dB
Soort magneet:	Ferriet
Luidspreker soort:	1-weg
Montagebeugels meegeleverd:	Ja
Diameter woofer:	127 mm
Aantal woofer drivers:	1
Diameter hogetonenluidspreker:	25.4 mm
Aantal tweeter drivers:	1
Tweeter:	Ja
Speaker positie:	Voorkant