Polar B1 Handleiding

Bekijk gratis de handleiding van Polar B1 (4 pagina’s), behorend tot de categorie Smartwatch. Deze gids werd als nuttig beoordeeld door 20 mensen en kreeg gemiddeld 5.0 sterren uit 2 reviews. Heb je een vraag over Polar B1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

How to Put Your Heart Rate Monitor On

The elastic strap

holds the transmitter

in the correct position.

The Polar B1™

wrist receiver

displays your heart

rate during exercise.

The Polar transmitter

detects your heart rate

and transmits it to the

wrist receiver.

1. Carefully wash the transmitter with a mild

soap and water solution.

2. Rinse it with pure water.

3. Dry the transmitter carefully with a soft towel.

4. Keep the wrist receiver clean and wipe off

any moisture.

5.Store the heart rate monitor in a clean

and dry place. Dirt impairs the elasticity

and functioning of the transmitter.

Sweat and moisture can keep the

electrodes wet and the transmitter

activated, which shortens battery life.

The combined impact of moisture and intense

abrasion may cause a black color to come off

the transmitter's surface, which might stain

light-colored clothes.

Keep the wrist receiver

within 3 feet of your

transmitter. Check that

you are not near other

people with heart rate

monitors or any source

of electromagnetic

disturbance.

1. Press to stop.

1.

1.

How to Put Your Heart Rate Monitor On

How to Start

How to Stop

After Exercising

Target Heart Rate Zone

When Battery Runs Out

Minimizing Possible Risks in Exercising

with Heart Rate Monitor

Technical Specifications

Limited Polar International Guarantee

Disclaimer

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

How to Start

2. How to Stop

3. After Exercising

Heart Rate Monitor

User’s Manual

Heart Rate Monitor

User Manual

USA

Contents

17922069.00 USA C

4.

Attach the transmitter to the elastic strap.

1. Adjust the strap length to fit snugly

and comfortably. Secure the strap around

your chest, just below the chest muscles,

and buckle it.

2.

Lift the transmitter off your chest and

moisten the two grooved electrode

areas on the back.

3. Check that the wet electrode areas are

firmly against your skin and the Polar logo

is in a central, upright position.

4.

3. Your heart rate appears

approximately in 5 seconds.

Heart rate symbol flashes

to the beat of your heart.

Press to start.

2.

Wrist receiver turns off.

2.

Product specificaties