Planet IPOE-270-12V Handleiding

Bekijk gratis de handleiding van Planet IPOE-270-12V (15 pagina’s), behorend tot de categorie Netwerkkaart/adapter. Deze gids werd als nuttig beoordeeld door 26 mensen en kreeg gemiddeld 4.7 sterren uit 2 reviews. Heb je een vraag over Planet IPOE-270-12V of wil je andere gebruikers van dit product iets vragen? Stel een vraag

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET Industrial 2-port Multi-Gigabit

802.3bt PoE++ Injector Hub, IPOE-270/IPOE-270-12V. In the

following sections, the term “Industrial PoE++ Injector Hub”

means the IPOE-270 or IPOE-270-12V.

Open the box of the Industrial PoE++ Injector Hub and carefully

unpack it. The box should contain the following items:

Industrial PoE++ Injector Hub x 1User’s Manual x 1

DIN-rail Kit x 1RJ45 Dust Caps x 4Wall-mount Kit x 1

If any of these are missing or damaged, please contact your dealer

immediately.

Power

Consumption

(Ethernet Full

Loading)

52V DC:

1.5watts/5.1BTU

54V DC:

1.6watts/5.4BTU

56V DC:

1.6watts/5.4BTU

Full loading with PoE

48V DC (120W PoE

Budget):

128watts/436BTU

52V DC (180W PoE

Budget):

177watts/603BTU

54V DC (180W PoE

Budget):

187watts/638BTU

56V DC (180W

PoE Budget):

185watts/631BTU

54V DC: 2.1watts/7.1BTU

56V DC: 2.2watts/7.5BTU

Full loading with PoE

12V DC (60W PoE Budget):

60watts/204BTU

24V DC (120W PoE Budget):

124watts/423BTU

48V DC (120W PoE Budget):

120watts/409BTU

52V DC (180W PoE Budget):

188watts/641BTU

54V DC (180W PoE Budget):

188watts/641BTU

56V DC (180W PoE Budget):

184watts/627BTU

Dimensions41 x 70 x 115 mm (W x D x H)

Weight 284g387g

EnclosureIP30 metal case

InstallationDIN-rail kit and wall-mount kit

ESD Protection6KV

Surge Protection6KV

Power over Ethernet

PoE Standard

IEEE 802.3bt Power over Ethernet Plus Plus, 4-pair

PSE

Compatible with IEEE 802.3at PoE+ PSE

3.2 Device Upper Panel

The upper panels of the Industrial PoE++ Injector Hubs consist of

one terminal block connector within two power inputs.

1 2 3 4

V1+ V2+

PWR1 PWR2

DC Input:

48-56V

, 4A max.

V1+

PWR1

V2+ V2

PWR2

DC Input:

12-56V

, 6A max.

1 2 3 4

Figure 3: IPOE-270 Top View IPOE-270-12V Top ViewFigure 4:

3.3 Wiring the Power Inputs

The terminal block connector on the top panel of Industrial PoE++

Injector Hub is used for two DC redundant power inputs. Please

follow the steps below to insert the power wire.

Caution

When performing any of the procedures like inserting

the wires or tightening the wire-clamp screws, make

sure the power is OFF to prevent from getting an

electric shock.

1. Insert positive and negative DC power wires into contacts 1 and

2 for POWER 1, or contacts 3 and 4 for POWER 2.

1 2 3 4

V1+ V2+

PWR1 PWR2

DC Input:

48-56V

, 4A max.

V1+

PWR1

V2+ V2

PWR2

DC Input:

12-56V

, 6A max.

1 2 3 4

3. Hardware Introduction

3.1 Device Front Panel

The front panels of the Industrial PoE++ Injector Hubs consist of

Ethernet interfaces and LED indicators.

Front View

P1 P2

60W 120W 180W

PoE

Usage

PoE++

Ethernet

PoE++

Ethernet

P1 P2

60W 120W 180W

PoE

Usage

PoE++

Ethernet

PoE++

Ethernet

Data port 1

PoE port 1

Data port 2

PoE port 2

Figure 1: Figure 2:

IPOE-270 Front View IPOE-270-12V Front View

2.ProductSpecications

ModelIPOE-270 IPOE-270-12V

Hardware Specications

Copper Ports

2-pair 10/100/1G/2.5G/5GBASE-T RJ45:

Data input port 1 and PoE output port 1

Data input port 2 and PoE output port 2

Connector Removable 4-pin terminal block

Pins 1 and 2 for Power 1; Pins 3 and 4 for Power 2

LED Indicator

System: Power 1 (Green) Power 2 (Green)

PoE Usage: 60W/120W/180W (Amber)

802.3bt PoE++ Port: PoE-in-use x 1 (Green:bt,

Amber:at)

Network Cable

Twisted-pair cable up to 100 meters (328ft)

10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6

100BASE-TX: 4-pair UTP Cat. 5, 5e, 6

1000BASE-T: 4-pair UTP Cat. 5e, 6

2.5G/5GBASE-T: 4-pair UTP Cat.6, 6A,7

Data Rate10/100/1000/2500/5000Mbps

Power

Requirements

48~56V DC,

redundant power

with reverse polarity

protection.

12~56V DC,

redundant power with

reverse polarity protection.

Power

Consumption

(Ethernet Full

Loading)

System ON without

loading

48V DC:

1.4watts/4.7BTU

System ON without

loading

12V DC: 1.8watts/6.1BTU

24V DC: 2.4watts/8.1BTU

48V DC: 2.4watts/8.1BTU

52V DC: 2.6watts/8.8BTU

PoE Power

Supply TypeEnd-span + Mid-span

Power Pin

Assignment

End-span: 1/2 (-), 3/6 (+); Mid-span: 4/5 (+), 7/8

(-)

PoE Power

Budget (max.)

120W@48V DC input

180W@52V/54V/56V

DC input

60W@12V DC input

120W@24V/48V DC input

180W@52V/54V/56V DC

input

Number of

devices that can

be powered

2

Standards Conformance

Regulatory

Compliance FCC Part 15 Class A, CE

Stability Testing

IEC 60068-2-32 (free fall)

IEC 60068-2-27 (shock)

IEC 60068-2-6 (vibration)

Standards

Compliance

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3bz 2.5G/5GBASE-T

IEEE 802.3at Power over Ethernet Plus

IEEE 802.3bt Power over Ethernet Plus Plus

Environment

Temperature Operating: -40~75 degrees C

Storage: -40~75 degrees C

Humidity Operating: 5~90% (non-condensing)

Storage: 5~90% (non-condensing)

System LEDs

LED ColorFunction

P1Green Lights to indicate DC power input 1 has

power.

P2Green Lights to indicate DC power input 2 has

power.

PoE UsageAmber

60W, 120W, 180W

Lights to indicate the system consumes over

60-/120-/180-watt PoE power budget.

Blinks to indicate the system consumes less

60-/120-/180-watt PoE power budget.

802.3bt PoE++ TP Interface LEDs

LED ColorFunction

802.3bt

PoE++

PoE-in-Use

Green

Lights to indicate that the port is providing

802.3bt PoE++ power to remote powered

device.

O or blink to indicate that the port is not

providing PoE power to remote powered

device.

Amber

Lights to indicate that the port is providing

802.3at PoE+ power to remote powered

device.

O or blink to indicate that the port is not

providing PoE power to remote powered

device.

2. Tighten the wire-clamp screws for preventing the wires from

loosening.

1234

Power 1Power 2

+ - + -

Note

The wire gauge for the terminal block should be in the

range between 12 and 24 AWG.

3.4 Grounding the Device

Users MUSTcomplete grounding wired with the device; otherwise,

a sudden lightning could cause fatal damage to the device.

1 2 3 4

V1+ V2+

PWR1 PWR2

DC Input:

48-56V

, 4A max.

Earth Ground

Note

EMD (Lightning) DAMAGE IS NOT CONVERED UNDER

WARRANTY.

Product specificaties