Pioneer SGY-PM68 Handleiding
Pioneer
Fietscomputer
SGY-PM68
Bekijk gratis de handleiding van Pioneer SGY-PM68 (20 pagina’s), behorend tot de categorie Fietscomputer. Deze gids werd als nuttig beoordeeld door 55 mensen en kreeg gemiddeld 4.0 sterren uit 28 reviews. Heb je een vraag over Pioneer SGY-PM68 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/20
Quick Guide
New Installation Procedure
• A new installation procedure is available for SGY-PM90 and
SGY-PM68 Series cranksets.
• The newest firmware for the SGX-CA500 is required for use with
these cranksets 2.43 –
• Compatible cranksets will have an orange sticker on the box and
another on one of the crank arms.
• An updated owners manual will be included in those systems.
• Units not displaying this orange sticker should follow the
installation instructions found in the owners manual provided with
that product.
• The new installation procedure does not provide any
performance enhancements to the product.
• Installation procedures on pages 3 and 4 of this Quick Guide are
for this new procedure.
Easy Installation Power Meter Cranksets
SGY-PM90 and SGY-PM68 with Non-Pioneer ANT+ Cycle Computer
1.) Magnet Placement
•Measuring from the center of the bottom bracket out,
temporarily tape the magnet so that the center line of the
magnet is:
• Right Drive Side - 42mm
• Left Side - 53mm
•Use the supplied Magnet Placement Template to help locate
the optimum locations for magnet placement on the frame.
•Position the magnets so the sensor line and magnet center
line are parallel when the sensor passes over. Center hole on bottom bracket and use supplied
double sided tape to temporarily secure while locating
optimum magnet location
Sensor Line:
Magnet
Center
Line: Magnet Range
1.5mm – 10.7mm
Magnet Template
card
2.) Confirm Magnet Placement
•Remove and replace both Left and Right batteries. Orange light will appear for 10 seconds.
•Rotate the crank slowly (30rpm). Check that the LED on each sensor lights green once for each
revolution.
•Once confirmed, secure magnets for final placement. If no Green LED,
check and adjust
magnet placement
LED’s light green
3.) Pair to your ANT+ Computer
• Spin the crank 3 4 rotations to activate the Power Meter –
See your ANT+ Cycle Computer
Instructions for Power Meter Pairing and
Zero Calibration procedures.
ID 12345
Sensor ID
Left Sensor Arm
For additional Installation Instructions visit the following on-line support
locations
www.pioneerelectronics.com/PUSA/Cycle+Sports/Products/Power+Meters
www.Youtube/Pioneer Cycle Sports USA
Please refer to the owners manual for detailed installation instructions.
Visit https://cyclo-sphere.com/ for the latest firmware and updates.
Customer Support 1- - - –800 421 1624
E-Mail: cycle-sports@pioneer-usa.com
Product specificaties
| Merk: | Pioneer |
| Categorie: | Fietscomputer |
| Model: | SGY-PM68 |
Heb je hulp nodig?
Als je hulp nodig hebt met Pioneer SGY-PM68 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Fietscomputer Pioneer
19 Mei 2023
17 Januari 2023
7 Januari 2023
6 Januari 2023
30 December 2022
5 December 2022
19 November 2022
10 November 2022
31 Maart 2022
3 April 2022
Handleiding Fietscomputer
- Cycle Ops
- Lezyne
- Gazelle
- Mio
- Magene
- Wahoo
- Pro
- Cresta
- Blackburn
- Bosch
- Ascot
- Steren
- Kellys
- Powertap
- SmartHalo
Nieuwste handleidingen voor Fietscomputer
17 Juni 2025
16 Juni 2025
7 Juni 2025
27 April 2025
22 April 2025
22 April 2025
15 April 2025
15 April 2025
31 Januari 2025
28 Januari 2025