Philips AJ3977 Handleiding

Philips Wekkerradio AJ3977

Lees hieronder de 📖 handleiding in het Nederlandse voor Philips AJ3977 (6 pagina's) in de categorie Wekkerradio. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

AJ3977

CD Clock Radio

English Controls/ Power supply

Controls (See 1)

Front panel

1ALARM RESET/ y

–

stops the active alarm for 24 hours

–

turns the set on/off

–

turns off SLEEP function

2 LIFT TO OPEN

–

lift here to open CD

door

TUNER – selects CD or radio sound

source

4ALARM 2

–

turns on ALARM 2 and selects radio, CD

or buzzer mode

–

stops ALARM 2 for 24 hours

–

turns off ALARM 2

DIM

– changes the brightness of display

illumination

REPEAT ALARM

– stops the alarm for a

5-minute period

2; - starts or pauses CD playback

BAND 9

Tuner: selects wavebands

CD: stops CD playback

HOUR/ MIN,TUNING ∞ / §

Clock: adjusts the hour/minute for clock/

alarm time (up)

Tuner:

tunes to radio stations (down, up)

CD: skips or searches CD track/ passage

backward/ forward

VOLUME3 4,

–

adjusts volume level

PRESET4

–

selects a preset radio station

(down)

DISPLAY

–

toggles clock display/ status of

the set

REPEAT/ PRESET3

CD:

repeats a track /program/ entire CD

Tuner: selects a preset radio station (up)

SET TIME/PROGRAM

Clock: sets clock time

Tuner: programs preset stations

CD:

programs tracks and reviews the

program

SLEEP - displays/adjusts/turns off sleep timer

^ALARM 1

–

turns on ALARM 1 and selects radio, CD

or buzzer mode

–

stops ALARM 1 for 24 hours

–

turns off ALARM 1

Back and bottom panels

RESET

– use a ballpoint pen to press the

hole if the set/display does not react to any of

the controls

Battery compartment

–

insert 2 x 1.5V

AA batteries (not supplied) for clock memory

backup

(

Power cord - connects to wall outlet

)FM antenna – improves FM reception.

CAUTION

Use of controls or adjustments or

performance of procedures other

than herein may result in hazardous

radiation exposure or other unsafe

operation.

Power Supply

1 Check if the power voltage, as shown on the

back of the set, corresponds to your local

power supply.

2 Connect the power plug to the wall outlet..

The power supply is switched on and 12:00

appears on the display.You can set the clock

now. (See Setting the clock)

3 To turn off the set completely, withdraw the

power cord from the wall socket.

The type plate is located on the back

of the set

User manual

Alarm

General

Two different alarm times ALARM1 and

ALARM2 can be set in the radio, CD or

buzzer mode.

Setting the alarm time and

mode

1 Check the set is switched off.

2 Press or ALARM 1 ALARM 2 once or

more to switch on the alarm and select tuner,

CD or buzzer alarm modes.

➜ Hour and minute digits flash (12:00 flashes

by default). Display shows AL1 (or AL2)

TUNER,AL1 AL2 CD,AL1 AL2(or ) (or )

(See 2)

3 Hold down or press

HOUR/ MIN

repeatedly to adjust the hours and minutes

respectively. Release

HOUR/ MIN

when you

have reached the correct setting.

4 Press

SET TIME/PROGRAM to confirm.

➜The display returns to clock time. AL1 or

AL2 appears. )(See 3

➜ At the set alarm time, the radio, CD or

buzzer switches on and about 60 minutes

later, switches off automatically.

➜

If you set and activate the same time for

both alarms, only

ALARM 1

will be

activated at the set alarm time.

➜ You will deactivate the alarms after

turning on the set.

•To check your alarm time setting, press

ALARM 1 ALARM 2or

Helpful hints:

- If CD alarm mode is selected, a CD must be

inserted. The buzzer alarm option will auto-

matically replace the CD alarm if you

have forgotten to insert a CD.

- If you have an alarm set in the radio or CD mode,

make sure you have adjusted the volume loud

enough to wake you up.

Switching off the alarm

There are 3 ways of switching off the alarm.

Unless you choose to cancel the alarm

completely, the Daily Alarm Reset option will

be automatically selected after 60 minutes-

from the time your alarm time first goes off.

Daily alarm reset

If you want the alarm mode to be stopped

immediately but also wish to repeat the

alarm call at the same time for the following

day:

• Press ALARM RESET/ yduring the

alarm call.

• or press ALARM 1 ALARM 2 or during

the alarm call.

Repeat alarm

This will repeat your alarm call at 5-minute

intervals.

1 During the alarm call, press REPEAT

ALARM.

2 Repeat if desired (up to a maximum 12

times)

Switching off the alarm completely

•Press

ALARM 1 ALARM 2 or

once or

more until the AL1 AL2 or disappears.

Alarm

Basic functions

Clock

Basic functions

Switching on and off and

selecting functions

1 Press ALARM RESET/ yto switch on.

= The set switches to the last sound source

selected.

= The active alarm is switched off.

2 Press

TUNER

once or more to select:

CD TUNERor function.

3 Press yto switch off the set.

= The active alarm is switched on.

Helpful hints:

–The tuner presets and the volume level will be

retained in the set’s memory.

Adjusting volume

• Adjust the volume with the

VOLUME3 4,

controls.

➜Display shows the volume level and a

number from 00-20.

Illumination brightness

• Press

DIM

once or more.

=The brightness of the display can be

adjusted.

Low Low ➟ ➟Bright

Clock

Clock memory backup

When power failure occurs, the set will be

turned off. When the power supply returns,

12:00 appears on the display and you need to

reset the clock.

To retain the clock/ alarm time in the event of

AC power failure or disconnection, insert 2 x

1.5V batteries, type AA (not supplied), into

the battery compar tment: it will act as clock

memory backup; However, operation of the

alarms, tuner and CD are excluded.

1 Connect the power plug to the wall outlet.

2 Insert 2 x AA batteries into the battery

compartment..

• Replace the batteries once a year, or as

often as necessary.

Batteries contain chemical substances,

so they should be disposed of properly

Setting the clock

The time is displayed using 12-hour clock

where or PM MW lights up.

1 Check the set is switched off.

2 Press

SET TIME/PROGRAM.

➜ Display: hour and minute digits flash

(12:00 flashes by default)

3 Hold down or press

HOUR/ MIN

repeatedly to adjust the hours and minutes

respectively. Release

HOUR/ MIN

when you

have reached the correct setting.

4 Press

SET TIME/PROGRAM

to confirm.

Helpful hints:

- If no action is executed within 10 seconds, the

display will return to previous time setting.

Standby power consumption

(clock mode) 1.0W

Printed in China YM-527

CLASS 1

LASER PRODUCT

AJ 3977

English

Digital tuner

Tuning to radio stations

1 Press yto on, then press

TUNER once

or more

to select TUNER.

➜The display shows TUNER and

if programmed, a preset number appears

➜ Then, the display shows briefly radio

station frequency and waveband.

If programmed, PROG appears (See 4)

➜ The display returns to clock time (See 5)

➜ The active alarm is switched off. AL1 or

AL2 disappears.

•If necessary, press

DISPLAY

to toggle the

clock and radio display.

2 Press

BAND 9

to select your desired

waveband, MW or FM.

3 Press and hold until the frequency in∞ §or

the display starts running.

➜The radio automatically tunes to a station

of sufficient reception.The frequency keeps

running during automatic tuning..

4 Repeat step 3 if necessary until you find the

desired station.

•To tune to a weak station, press ∞ § or briefly

and repeatedly until you have found optimal

reception.

To improve radio reception:

For FM, extend and position the FM antenna fully to

obtain optimum reception.

For MW, the set is provided with a built-in antenna.

Direct the aerial by turning the whole set.

Programming radio stations

You can store up to a total of 20 radio stations in

the memory (10 FM and 10 MW), manually or

automatically (Autostore).

Manual programming

1 Tune to your desired station (see Tuning to

radio stations).

2 Press

SET TIME/PROGRAM

to activate

programming.

™Display: . P01 PROG flashes.

3 Press 3 4,once or more to allocate a num-

ber from 1 to 10.

4 Press

SET TIME/PROGRAM

to confirm.

5 Repeat steps 1-4 to store other stations.

Helpful hints:

- You can erase a preset station by storing another

frequency in its place.

Autostore

Autostore automatically starts programming radio

stations from preset 1. Any previous presets e.g.

manually programmed will be erased.

•In TUNER mode, press and hold

SET

TIME/PROGRAM

until the frequency and

PROG flash.

➜ Available stations are programmed

(FM and MW). and a preset number (1 - P

10) appear when a station is stored.

(See )6

➜After all stations are stored, the first

autostore preset station automatically

plays.

To listen to a preset station

Press the

PRESET

3 4 ,buttons once or more

until the desired preset station is displayed.

Digital tuner C

CD player

•

Meet Philips at the Internet

http://www.philips.com

Product specificaties

Merk:	Philips
Categorie:	Wekkerradio
Model:	AJ3977

Heb je hulp nodig?

Als je hulp nodig hebt met Philips AJ3977 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Wekkerradio Philips

Philips ORD2105B Handleiding

11 April 2024

Philips AJ3125 Handleiding

5 Maart 2024

Philips AJ3250 Handleiding

6 November 2023

Philips Wake-up Light HF3480 Handleiding

24 Oktober 2022

Philips AJ3380 Handleiding

21 Juli 2022

Philips AJ6000 Handleiding

2 Augustus 2022

Philips AJ3230 Handleiding

23 Juli 2022

Philips AJM180 Handleiding

5 Augustus 2022

Philips TAR7606 Handleiding

7 Oktober 2022

Philips AJ3115 Handleiding

23 Juli 2022

Handleiding Wekkerradio

Nieuwste handleidingen voor Wekkerradio

Enhance Weather Clock Handleiding

25 April 2024

Trevi EC 882 Handleiding

18 April 2024

Essentiel B Game Up Handleiding

9 April 2024

Essentiel B Big Up Handleiding

9 April 2024

Geemarc Wake’n’Shake SPOT Handleiding

9 April 2024

Oregon Scientific TW223 Handleiding

9 April 2024

Oregon Scientific TW369 Handleiding

9 April 2024

Geemarc Wake'N'Shake Voyager V2 Handleiding

9 April 2024

Geemarc Wake'n'Shake DYNAMITE Handleiding

9 April 2024

Geemarc Wake’n’Shake JUMBO Handleiding

9 April 2024