Peavey SP 218 Handleiding

Peavey Speaker SP 218

Lees hieronder de 📖 handleiding in het Nederlandse voor Peavey SP 218 (8 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 79 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
www.peavey.com
SP 218®
Passive Sub
Product
Specications
ENGLISH
Description
e SP® 218 is a subwoofer designed to enhance the low-end in the SP Series or other full-range speaker systems. Other
uses include bass guitar, keyboard and drum monitoring. is loudspeaker system delivers high output, low distortion bass
from two 18” Pro Rider woofers mounted in a vented enclosure. is unit is designed for portability. e enclosure is con-
structed of hardwood plywood augmented with internal braces with a textured black painted nish. A full-length, wrap-
around perforated steel grille protects the front of the enclosure. Tilt-back casters are mounted at the rear bottom corner
to assist in portability. A pole mount plate is located on the right hand side of the enclosure, with an insert for a threaded
pole, using M20 threads. e threaded pole is included. Rubber feet and corner casters on the bottom and a corner handle
on top make moving the enclosure an easy, one-person operation.
Inputs are at the rear of the enclosure and consist of two 1/4” jacks, one four-pin twist-lock non-switching jack and one
Neutrik® Speakon® switching jack. e enclosure input is congurable, with the default being 4 ohms with both drivers in
parallel when using the parallel inputs. A dual-woofer 2 x 8 ohm conguration is available through the switching Neutrik®
jack, which disconnects the 4 ohm inputs and provides separate inputs to the woofers when used. is ingenious input de-
sign provides maximum exibility for single-or dual-amplier operation, without having to manually rewire the enclosure.
is low frequency enclosure is comprised of two 18” Pro Rider® subwoofer drivers in a vented alignment. e Pro Rider
driver delivers superior performance due to its advanced cooling system, large 4” voice coil with edge-wound aluminum
wire and high performance cone. is design provides strong bass extension and high power handling to complement a
full-range sound system.
As the SP 218 does not include a passive subwoofer crossover, input should be electronically ltered for subwoofer appli-
cations. In addition, for high power operation, a high-pass lter set at 36 Hz and using a 24 dB/octave Linkwitz-Riley lter
should be used to improve performance and reliability.
Features
• Two 18” Pro Rider® woofers
• 2,400W program, and 4,800W peak power handling
• Low frequency response down to 41 Hz.
• Inputs include one four-pin twist lock connector and two 1/4” phone jacks all in parallel, and one Neutri
Speakon® switching jack for independent access to the woofers
• readed pole for mount included
• Pole mount plate built-in, threaded for positive pole support
• Full-length, wrap-around perforated steel grille
• Tilt-back casters
SPECIFICATIONS
Frequency response, 1 meter on-axis, swept-sine in anechoic environment:
51 Hz to 210 Hz (±3 dB)
Usable low frequency limit (-10dB point):
41 Hz
Power handling:
1,200 watts continuous 2,400 watts program 4,800 watts peak
Sound pressure level, 1 watt, 1 meter in anechoic environment:
99 dB SPL (2.00 V parallel input)
Maximum sound pressure level (1 meter):
Anechoic: 129 dB SPL continuous 135 dB SPL peak
Half-space: 135 dB SPL continuous 141 dB SPL peak
Radiation angle measured at -6 dB point of polar response:
Essentially omnidirectional
Transducer complement:
2 x 18” woofer, vented Pro Rider® 1808-8 ALCP
Box tuning frequency:
38 Hz
Minimum recommended active crossover frequency and slope for bi¬amping:
100 Hz at 24 dB/octave Linkwitz-Riley Low pass lter
Recommended Infra-sonic Filter:
36 Hz (-6 dB point) 24 dB/octave Linkwitz-Riley High-pass.
Impedance ( Z ):
Parallel input: nominal 4.0 Ω, minimum: 3.1 Ω
Dual-woofer input: nominal 2 x 8.0 Ω, minimum: 2 x 6.2 Ω
Input connections:
Full range: two 1/4” phone jacks, one four-pin, twist lock jack, one four-pin Neutrik® SpeakOn® switching jack
for independent access to each woofer..
Enclosure materials & nish:
Plywood with internal bracing nished in black textured paint. Full length black powder coated metal grille.
Dimensions (H x W x D):
Height: 47.28 “ / 1201 mm Width: 20.38” / 518 mm Depth: 26.81” / 681 mm
Net Weight:
135 lbs. (61.3 kg)
Architectural & Engineering Specications
e loudspeaker system shall have an operating bandwidth of 51 Hz to 210 Hz. e nominal output level shall
be 99 dB when measured at a distance of one meter with an input of one watt. e nominal impedance shall be
4.0 ohms or 2 x 8 ohms, depending on conguration. Two Pro Rider® model 1808-8 ALCP 18” woofers shall be
used in a vented enclosure.
e maximum continuous power handling shall be 1,200 watts, maximum program power of 2,400 watts, a peak
power input of at least 4,800 watts and a minimum amplier headroom of 3 dB. e outside dimensions shall be
47.28 inches high by 20.38 inches wide by 26.81 inches deep. e weight shall be 135 lbs. e loudspeaker system
shall be a Peavey model SP 218.
SPECIFICATIONS


Product specificaties

Merk: Peavey
Categorie: Speaker
Model: SP 218

Heb je hulp nodig?

Als je hulp nodig hebt met Peavey SP 218 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Peavey

Handleiding Speaker

Nieuwste handleidingen voor Speaker