PAC GMRVD2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor PAC GMRVD2 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
•
~
~
~
~
f>v~v~
-
GMRVD.-2
···
Overhead
LCD
retention
cable
for
GML4N
.Filii
/
Size
Truck's
&
SUV's
Rear
Seat
Entertai
(WI'Iep
keeping
the
factory
Head
Unit
See
Reverse
Side
fo
The
GMRVD2
is
a
plug
and
play
cable
that
routes
the
audio
and
video
signals
to
the
Rear
Seat
Entertainment
(RSE)
LCD.
The
audio
and
video
inputs
located
in
the
rear
of
the
center
console
are
also
terminated
as
RCA
jacks
behind
the
radio
at
this
connector
•
• When using a headunit with source control
(AN
inputs and
AN
outputs) - Connect the cables labeled "Audio/
Video Input from Rear Panel" to
an
AN
input (i.e.
AN
1
in,
AN
2 in). The cables labeled "Audio Video Output to
Overhead LCD" will then connect
to
the
AN
output of the new source unit. The single black wire is a shield, connect
this to ground.
• When using a standalone
DVD
player (only
AN
outputs) -
In
this case, connect the
AN
outputs to the cables
labeled "AudioNideo Output to Overhead LCD". The rear panel
AN
inputs will not
be
used and the black shield wire
should
be
connected to ground.
Note: This cable is intended for use in conjunction with an RP5-GM32 to retain all
safety and convenience systems. The vehicle should be equipped with an overhead
LCD and IR system, in which the DVD player was part
of
the AM/FM/CD receiver.
The RP5-GM32 is needed to power the IR headphone system.
DISCLAIMER: Under no circumstances shall the manufacturer
or
the distributors
of
the GMRVD2 be
held liable
for
consequential damages sustained in connection with the
GMRVD2.
The manufacture and
It's distributors will not,
nor
will they authorize any representative
or
any other individual
to
assume
obligation
or
liability
in relation
to
the
GMRVD2
other than
its
replacement.
Pacific Accessory Corporation - Santa Ana, CA 92705
support@pac-audio.com • 866-931-8021 • www.pac-audio.com
Rev:
042613
GMilVD.2
Adding
Allel'lllarkel
Monitors
fo
lite
Factory
Enlerlain111enl
Sysfe111
llfllllaclna
the
Facforv
HeGd
Unil
See
llererse
Side
The
GMRVD2
is
a
plug
and
play
cable
that
allows
aftermarket
monitors
and
IR
headphones
to
be
connected
to
the
factory
entertainment
system.
The
GMRVD2
is
connected
behind
the
factory
head
unit.
• When using an aftermarket monitor, connect the cables labeled "Audio Video Output to Overhead LCD" to the aftermarket Monitor video
input. If installing aftermarket IR headphones, connect the RED and WHITE RCAs to the audio input of the aftermarket
IR
headphones. The
cables labeled "Audio Video input From Rear Panel" are not used.
D
Aftermarket
Monitor
s=c::tQ.
~
VV'lV
Ill
Video
Output
Right
Audio
Output
Left
Audio
Output
Left
Audio
Input
DISCLAIMER: Under no circumstances shall the manufacturer
or
the distributors
of
the GMRVD2
be
held liable
for
consequential connection damages sustained in with the GMRVD2. The manufacture and
it's distributors
will
not,
nor
will they authorize any representative
or
any other individual
to
assume
obligation
or
liability in relation
to
the
GMRVD2
other than its replacement.
Pacific Accessory Corporation - Santa Ana, CA 92705
support@pac-audio.com • 866-931-8021 • www.pac-audio.com
Rev:
042613


Product specificaties

Merk: PAC
Categorie: Niet gecategoriseerd
Model: GMRVD2

Heb je hulp nodig?

Als je hulp nodig hebt met PAC GMRVD2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd PAC

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd