Ozito TPIK-025 Handleiding
Pagina's 1 Engels Pomp
Bekijk de handleiding van Ozito TPIK-025 gratis online of download de PDF. Deze handleiding is 25 keer bekeken. Vraag over dit model? Stel een vraag
TPIK-025
Tank to Pump Installaon Kit
These instrucons are to be used as a guide only. The fings & hose included in this kit will allow you to
connect your rainwater tank to your pump. Addional fings could be required depending on your pump
installaon requirements. Always read the instrucon manual supplied with your pump for full details
relang to safety instrucons, assembly, operaon and maintenance of your pump.
QUICK START GUIDE
Teflon tape (included) is recommended
on threads to ensure a water ght seal
and prevent any leakage.
Connect the 25mm Ball Valve to the
outlet of your rainwater tank.
Screw one end of the Flexible Sucon
Hose onto the Ball Valve.
(Check all hose clamps are
fully ghtened).
Screw the 25mm Threaded Connector
into the inlet of your pump.
Screw the other end of the Flexible
Sucon Hose installed in step 3 into the
25mm Threaded Connector installed in
step 4 to your pump.
Securely aach the 25mm Male
Connector to the outlet of your pump.
Screw the 25mm end of the Thread Elbow
onto the 25mm Male Connector installed
in step 6. Screw a piece of pipe
(not supplied) to the 20mm end of the
Threaded Elbow.
For connecng a tap (not supplied) to
your garden hose with a click connector
remove the 20mm insert from the
Tap Adaptor and aached to your tap.
A tap (not supplied) may be equipped
onto the end of pipe (not supplied) and
secured to the ground with a metal or
wooden stake for stability.
1 3
4 5 6
7 8 9
2
Have any quesons, call Ozito on (Aus) 1800 069 486 (NZ) 0508 069 486
Product specificaties
| Merk: | Ozito |
| Categorie: | Pomp |
| Model: | TPIK-025 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito TPIK-025 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden