Ozito TLR-090A Handleiding
Ozito
Laserwaterpas
TLR-090A
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito TLR-090A (6 pagina's) in de categorie Laserwaterpas. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
85°
75°
67.5°
65°
55°
45°
35°
25°
15°
5°
90° TILE
LASER
7m Range
INSTRUCTION MANUAL
SPECIFICATIONS
Power: 4.5V DC (3 x AA Batteries)
Laser Wavelength: 635nm
Laser Power: Class II, ,1mW
Working Range: 7m
Accuracy: ±0.5mm/m
Weight: 0.355kg
TLR-090A
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: valve adapters
and accessories.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
85°
75°
67.5°
65°
55°
45°
35°
25°
15°
5°
90° Tile Laser
Wall Mounting Plate, 3 x AA
Batteries
0719
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
85°
75°
67.5°
65°
55°
45°
35°
25°
15°
5°
The tool requires 3 AA batteries to operate.
1. Remove the metal wall
mounting plate if it is attached.
Note: The magnets on the base
of the tool are quite strong. Use
a at screwdriver to lift the plate
o the tile laser if necessary.
2. Push in the tab and lift o the
battery compartment lid.
3. Insert 3 AA batteries as
directed by the embossing in
the compartment.
4. Replace the battery
compartment lid by sliding the
lower tabs into the recess and
pressing the top half of the lid
into place.
1. On/O Button
2. Spirit Levels
3. 90° Line Lasers
4. Angle Reference Point
5. Angle Scale
6. Wall Mounting Plate
7. Battery Compartment
8. Magnetic Base
90° TILE LASER
TOP VIEW
BOTTOM VIEW
KNOW YOUR PRODUCT
1. INSTALLING BATTERIES
SETUP & PREPARATION
87
3
2
1
4
6
5
Installing The Wall Mounting Plate On A Wall
1. Remove the wall mounting plate from the tool.
2. Attach the mounting bracket
to a wall using a screw or nail
(not included). Be sure that
the head of the nail or screw
ts into the sunken recessed
side of the plate so that the
magnets on the tool can
connect rmly.
3. Place the base of the tile laser
onto the mounting plate.
4. Using the spirit levels as a
guide, rotate the tile laser on
the mounting plate until it is
fully level.
Attaching The Tile Laser
To A Metal Surface
The magnets on the base of the
tool can also be attached directly
to a metal surface.
Switching The Tool On/O
1. Press the on/o button once
to turn the unit on.
2. Press the button again to turn the lasers o.
Spirit Levels
The tile laser also has 2 perpendicular spirit levels to ensure the tool
is perfectly horizontal or vertical during installation and use.
2. USING THE WALL MOUNT 3. CONTROLS
OPERATION
85°
75°
67.5°
65°
55°
45°
35°
25°
15°
5°
85°
75°
67.5°
65°
55°
45°
35°
25°
15°
5°
WARNING! ENSURE THE LASER WINDOWS ARE
NOT AT EYE LEVEL OR DIRECTED TOWARDS
YOURSELF OR OTHERS WHEN OPERATING.
Product specificaties
| Merk: | Ozito |
| Categorie: | Laserwaterpas |
| Model: | TLR-090A |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito TLR-090A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Laserwaterpas Ozito
11 November 2023
10 November 2023
11 Juni 2023
11 Mei 2023
10 Mei 2023
5 Mei 2023
24 April 2023
18 April 2023
2 April 2023
31 Maart 2023
Handleiding Laserwaterpas
- Laserwaterpas Bosch
- Laserwaterpas DeWalt
- Laserwaterpas Brandson
- Laserwaterpas Bruder Mannesmann
- Laserwaterpas Einhell
- Laserwaterpas Fluke
- Laserwaterpas Laserliner
- Laserwaterpas Leica
- Laserwaterpas Makita
- Laserwaterpas Milwaukee
- Laserwaterpas Silverline
- Laserwaterpas Skil
- Laserwaterpas Toolcraft
- Laserwaterpas Hilti
- Laserwaterpas Futech
- Laserwaterpas Craftsman
- Laserwaterpas Stabila
- Laserwaterpas Alpha Tools
- Laserwaterpas Neo
- Laserwaterpas PLS
Nieuwste handleidingen voor Laserwaterpas
19 Maart 2024
19 Maart 2024
12 Maart 2024
12 Maart 2024
21 Januari 2024
27 December 2023
12 December 2023
14 November 2023
28 Augustus 2023
28 Augustus 2023