Ozito PXLMB-335 Handleiding

Bekijk gratis de handleiding van Ozito PXLMB-335 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 41 mensen en kreeg gemiddeld 4.5 sterren uit 9 reviews. Heb je een vraag over Ozito PXLMB-335 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

BLADE ASSEMBLY

BLADE ASSEMBL

Freecall

(NZ) 0508 069 486

www.ozito.com.au

(Aus) 1800 069 486

35

OZITO 25 Fox Drive, Dandenong South, Vic 3175, Australia.

ALWAYS HANDLE THE BLADE WITH CARE - SHARP EDGES CAN CAUSE

SERIOUS INJURY, PLEASE USE GLOVES.

WARNING!:ALWAYS ENSURE THE MOWER BLADE HAS

COMPLETELY STOPPED, REMOVE THE SAFETY KEY, BATTERIES AND

GRASS CATCHER PRIOR TO ANY MAINTENANCE.

REMOVING AND FITTING THE BLADE:

Only replace the blade with a genuine Ozito PXC replacement blade, as this will ensure

top performance and safety under all conditions.

1. To remove the blade bolt, hold the blade

rmly and with a 13mm socket loosen the

blade bolt by turning it anti-clockwise.

Note:A piece of timber will assist in holding

the blade while removing or tightening the

blade bolt.

2. Remove the blade bolt, spring washer, blade

and spacer.

3. To t the blade, rst place the spacer, then

the blade (writing facing out) over the centre

hole of the spacer, aligning the lugs.

Note:The shape and position of the lugs

prevent the blade from tting in the wrong

direction.

4. Fit the bolt and spring washer with a

universal wrench. The tightening torque should

be approx. 25Nm.

Replace the metal blade after 50 hours mowing or 2 years

whichever is sooner. If the blade is cracked or damaged replace

it with a new one.

Product specificaties