Ozito PXGAR-500 Handleiding


Bekijk gratis de handleiding van Ozito PXGAR-500 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.9 sterren uit 3 reviews. Heb je een vraag over Ozito PXGAR-500 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/4
1
ASSEMBLY INSTRUCTIONS
1223
PXGAR-500
ROBOT LAWN
MOWER GARAGE
ozito.com.au
CONTENTS
8 x Ground Anchor Screws
Hex Key & Fasteners
2
KNOW YOUR PRODUCT
1. Garage Hood
2. 2 x Lock
3. 2 x Foot
4. 2 x Threaded Pin
5. 2 x Nut
6. 4 x Cross-Head Screw
7. Hex Key
8. Strut - Short
9. 8 x Ground Anchor Screws
10. Strut - Long
11. Hex Key Storage
ROBOT LAWN MOWER GARAGE
1 2 3
4 5 6 7 9 10 38
112
SETUP & PREPARATION
STRUT - Short
STRUT - Long
3
Assembly
1. Align the pre-drilled hole in the end of each Strut with the corresponding hole in each of the
Feet. With the holes aligned fasten together using the four Cross-Head screws.
WARNING! NEVER STAND OR SIT ON THE ROBOT LAWN MOWER GARAGE.
THE GARAGE IS TO BE USED ONLY FOR ITS PRESCRIBED PURPOSE.
Proper Use
The robot lawn mower garage is designed to protect your robot lawn mower and its charging
station from weather conditions such as rain and sun. The garage does not protect your robot
lawn mower from lightning.
2. Place the Garage Hood on
the Feet and t the two Nuts
on the outside in the recess.
Push the Threaded Pins
from the inside through the
Garage Hood, then through
the Feet and into the two
Nuts. Fully tighten the
Threaded Pins with the Hex
Key.


Product specificaties

Merk: Ozito
Categorie: Niet gecategoriseerd
Model: PXGAR-500

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXGAR-500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden