Ozito PXGGS-011 Handleiding

Ozito Niet gecategoriseerd PXGGS-011

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXGGS-011 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
STANDARD EQUIPMENT
PXGGS-011
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Pre-heating Time: 120s
Max. Heating Temp: 170°C
Glue Stick Size: Ø11mm
Weight: 0.4kg
ozito.com.au
0619
Cordless Glue Gun
5 x Ø11mm Glue Sticks
Round Nozzle, Precision
Nozzle & 13mm Hex Spanner
CORDLESS
11MM
GLUE GUN
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Installing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
Removing The Battery Pack
1. Hold down the battery release
button.
2. Slide the battery out.
1. Round Nozzle
2. Nozzle Cover
3. Tool Housing
4. Status Indicator Light
5. On/Off Button
6. Monitoring Window
7. Glue Stick Inlet
8. Battery Seating
9. LED Worklight
10. Flow Control Trigger
11. 5 x Glue Sticks
12. 13mm Hex Spanner
13. Precision Nozzle
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
CORDLESS 11MM GLUE GUN
ACCESSORIES
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE BATTERY
SETUP & PREPARATION
1
2
34
56
7
11
8
12
13
9
10
Installing Glue Sticks
1. Insert the glue stick into the glue stick inlet.
2. Squeeze the ow control trigger multiple times to push the glue stick
further down the channel.
WARNING! IN THE EVENT OF ACCIDENTAL SKIN
CONTACT WITH HOT GLUE, RUN UNDER COLD
WATER IMMEDIATELY.
WARNING! DO NOT ALLOW HOT GLUE TO COME
INTO CONTACT WITH THE PRODUCT HOUSING
DURING USE.
Installing A Different Nozzle
The nozzles on this glue gun can be changed to better suit the task at hand.
1. Remove the rubber nozzle cover by pulling it off the glue gun.
Note: The nozzle cover may be difcult to remove after the glue gun has
been used. The spanner may be used to help remove it.
2. Unscrew the nozzle by turning it anti-clockwise with the 13mm spanner.
Note: Inspect the rubber O-ring on the nozzle for damage before tting it.
If the O-ring is worn, replace it before continuing to use the nozzle.
3. Fit the desired nozzle onto the end of the glue gun and tighten it by
turning it clockwise.
4. Fit the nozzle cover back onto the new nozzle.
2. CHANGING NOZZLES 3. LOADING GLUE STICKS
a.
b.
WARNING! ENSURE THE TOOL IS SWITCHED OFF,
THE BATTERY IS REMOVED & THE TOOL HAS
COOLED DOWN BEFORE PERFORMING ANY OF THE
FOLLOWING TASKS.

Product specificaties

Merk: Ozito
Categorie: Niet gecategoriseerd
Model: PXGGS-011

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXGGS-011 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Ozito

Ozito

Ozito PXPPS-1820 Handleiding

8 April 2024
Ozito

Ozito PXNGS-218 Handleiding

8 April 2024
Ozito

Ozito PXHTBK-2518 Handleiding

8 April 2024
Ozito

Ozito PSR-5732U Handleiding

16 Maart 2024
Ozito

Ozito PXCLMLTC-418U Handleiding

16 Maart 2024
Ozito

Ozito PXWBS-200U Handleiding

16 Maart 2024
Ozito

Ozito PXDDK-301U Handleiding

16 Maart 2024
Ozito

Ozito PXCPPS-018U Handleiding

16 Maart 2024
Ozito

Ozito WPHGK-2000U Handleiding

16 Maart 2024
Ozito

Ozito PXDDGK-600U Handleiding

16 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024