Ozito PXCGSS-018U Handleiding

Ozito Grastrimmer PXCGSS-018U

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXCGSS-018U (3 pagina's) in de categorie Grastrimmer. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
CORDLESS GRASS
TRIMMER & SHEAR
ORIGINAL INSTRUCTIONS
SPECIFICATIONS
Voltage: 18V
No Load Speed: 1,200/min
Hedge Trimmer: 200mm Blade
Grass Shear: 100mm Blade
Max. Cutting Cap.: 8mm
Weight: 1.0kg
PXCGSS-018U
WHAT’S IN THE BOX
Cordless Grass Trimmer /
Shear
Hedge Trimmer Blade
MAINTENANCE
DESCRIPTION OF SYMBOLS
TROUBLESHOOTING
WARRANTY
ozito-diy.co.uk
WARNING! When using mains-powered tools, basic safety precautions, including
the following, should always be followed to reduce risk of ïŹre, electric shock, personal
injury and material damage.
Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool.
Save these instructions and other documents supplied with this tool for future reference.
Before you connect the charger to the mains supply make sure that the data on the rating plate are identical to the mains data.
This tools charger is double insulated therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.
Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for
added protection against injury resulting from a possible electrical insulation failure within the tool.
The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current
device reduces the risk of electric shock.
GENERAL POWER TOOL SAFETY WARNINGS
ELECTRICAL SAFETY
0716
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR YOUR
BATTERY CHARGER.
1. Before using the charger read all instructions and cautionary markings on the charger, battery pack and the product using the
battery pack.
2. This charger is not intended for any uses other than charging rechargeable batteries. Any other use may result in risk of re,
electric shock or electrocution.
3. Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive internal heat.
Place the charger in a position away from any heat source.
4. To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the charger.
5. Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
6. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in the risk of re,
electric shock or electrocution.
7. Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way. Have it checked by an
electrician or power tool repairer.
8. Do not disassemble charger. Take it to an electrician or power tool repairer when service or repair is required. Incorrect reas-
sembly may result in a risk of electric shock, electrocution or re.
9. To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the battery pack
will not reduce this risk.
10. Never attempt to connect 2 chargers together.
11. DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed 40ÂșC (such as inside sheds or
metal buildings in summer).
12. The charger is designed to operate on standard household electrical power (240 volts). Do not attempt to use it on any other
voltage!
13. The battery pack is not fully charged out of the carton. First read the safety instructions and then follow the charging notes and
procedures.
14. The longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 18 -
24ÂșC. Do not charge the battery pack in an air temperature below 10ÂșC or above 40ÂșC. This is important and will prevent damage
to the battery pack.
15. Do not incinerate the battery pack even if it is seriously damaged or is completely worn out. The battery can explode in a re.
16. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, immediately
discontinue use and do not recharge.
17. During charging, the battery must be placed in a well ventilated area.
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the
warnings refers to your mains-operated (corded) power tool or battery-operated (cordless)
power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of
ïŹ‚ammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk
of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the inïŹ‚uence of drugs, alcohol
or medication. A moment of inattention while operating power tools may result in serious personal injury.
b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting
to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with
your nger on the switch or energising power tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
5. Battery tool use and care
a. Recharge only with the charger speciïŹed by the manufacturer. A charger that is suitable for one
type of battery pack may create a risk of re when used with another battery pack.
b. Use power tools only with speciïŹcally designated battery packs. Use of any other battery packs may
create a risk of injury and re.
c. When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a re.
d. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, ïŹ‚ush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
6. Service
a. Have your power tool serviced by a qualiïŹed repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
BATTERY AND CHARGER SAFETY WARNINGS
Cleaning and Storage
‱ Keep air intake clean and air vents free of debris to avoid overheating the motor.
‱ Do not use cleaning agents to clean the plastic parts of the tool.
A mild detergent on a damp cloth is recommended. Water must never come into contact with
the tool.
‱ If the trimmer vibrates abnormally, stop motor immediately. Abnormal vibration usually indicates
a mechanical problem continued operation could lead to injury or damage.
‱ Always place the blade cover on the blade before storing or transporting the hedge trimmer. Use
caution to avoid the sharp teeth of the blade.
‱ Store the hedge trimmer indoors, in a dry place that is inaccessible to children.
WARNING! ALWAYS ENSURE THE TOOL HAS
COMPLETELY STOPPED AND THE BATTERY IS
REMOVED PRIOR TO ANY MAINTENANCE.
Problem Cause Remedy
Trimmer is not
starting
Possible clogging Clean the trimmer blade of any
leaves or debris.
Battery is low in charge Charge battery
Battery not inserted properly Insert battery pack correctly
Trimmer is not
operating at full
capacity
Possible clogging Clean the trimmer blade of any
leaves or debris.
Motor stops while
trimming
Battery has no power Charge battery
Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the
trimmer by an unauthorised person or by mishandling of the trimmer. This tool is designed for DIY use
- use in commercial or industrial environments will void the warranty.
GRASS TRIMMER & SHEAR SAFETY WARNINGS
Read instruction manual
Keep bystanders away. Do not operate whilst people especially
children or pets are in the area.
Sharpening the cutting blade
1. Start and stop your trimmer
until the cutter blade and the
guard are slightly offset.
2. Remove the battery pack from
your trimmer/shear.
3. Clamp the blade assembly in a
vise and le the exposed cutting surface of each blade tooth. Remove as
little material as possible.
4. Remove the blade from
the vise and insert the battery pack. Repeat
steps 1-3 for the unsharpened edges of the
blade teeth.
Note: Do not operate your trimmer/shear with
dull or damaged cutting blades. This may cause
overload and will give unsatisfactory cutting
results.
Lubricating the blade
For best operation and longer blade life, lubricate the blade with light weight machine
oil before and after each use.
1. Remove the battery pack from the trimmer/
shear.
2. Lay the blade on a at surface. Apply a light
weight machine oil along the edge of the top
blade.
Grass Shear Blade
WARNING! DO NOT OIL WHILE THE TRIMMER/
SHEAR IS RUNNING.
Blade Covers
‱ Keep all parts of the body away from the cutter blade. Do not remove cut
material or hold material to be cut when blades are moving. Make sure the switch is off when
clearing jammed material. A moment of inattention while operating the trimmer may result in
serious personal injury.
‱ Carry the trimmer by the handle with the cutter blade stopped. When
transporting or storing the trimmer always t the blade cover. Proper handling of the trimmer will
reduce possible personal injury from the cutter blades.
‱ Hold the power tool by insulated gripping surfaces only, because the
cutter blade may contact hidden wiring. Cutter blades contacting a “live” wire may
make exposed metal parts of the power tool “live” and could give the operator an electric shock.
‱ Perform visual inspection on the hedge being trimmed. To ensure no wire
fences or foreign objects that the hedge trimmer may contact during operation.
‱ Never allow children or people unfamiliar with these instructions to use the trimmer.
‱ Avoid using the trimmer, while people, especially children or pets, are nearby.
‱ Use the trimmer only in daylight or good articial light.
‱ Never operate the trimmer with damaged blades in place.
‱ Switch on the trimmer only when the hands and feet are away from the cutting blades.
‱ Use only the manufacturer’s recommended replacement parts and accessories.
‱ Inspect and maintain the trimmer regularly. Have the trimmer repaired only by an authorized
repairer.
‱ When not in use, store the trimmer out of the reach of children.
‱ Face the cutting blades away from yourself, other people and animals while the power is connected
to the trimmer (especially during operation).
‱ Keep ventilation openings clear of debris. Keep handles dry, clean and free of oil and grease.
‱ Never reach underneath the trimmer (the cutting blade area) until it has completely stopped.
WARNING! When servicing, use only identical replacement parts. Use of any other parts
may create a hazard or cause product damage. To ensure safety and reliability, all repairs
should be performed by a qualied service technician.
WARNING! This appliance is not intended for use by young or inrm persons unless
supervised by a responsible person to ensure that they can use the appliance safely. Young
children should be supervised to ensure that they do not play with the appliance.
Battery & Charger sold
separately
OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
All of our products undergo strict quality checks to ensure that they reach you in perfect
condition. In the unlikely event that your device develops a fault, please contact our service
department at the address shown on this guarantee card. You can also contact us by
telephone using the customer service number shown. Please note the following terms under
which guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the manufacturer
mentioned below promises to buyers of its new products in addition to their statutory
guarantee claims are not affected by this guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or manufacturing faults on
a product which you have bought from the manufacturer mentioned below are limited to
either the rectication of said defects on the product or the replacement of the product,
whichever we prefer.
Please note that our devices are not designed for use in commercial, trade or professional
applications. A guarantee contract will not be created if the device has been used by
commercial, trade or industrial business or has been exposed to similar stresses during the
guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly instructions or due to
incorrect installation, a failure to follow the operating instructions (for example connecting
it to an incorrect mains voltage or current type) or a failure to follow the maintenance and
safety instructions or by exposing the device to abnormal environmental conditions or by
lack of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example overloading the
device or the use or unapproved tools or accessories), ingress of foreign bodies into the
device (such as sand, stones or dust, transport damage), the use of force or damage caused
by external forces (for example by dropping it).
- Damage to the device or parts of the device caused by normal or natural wear or tear or by
normal use of the device.
4. Your Product is guaranteed for a period of 60 months from the original date of purchase
and is intended for DIY (Do It Yourself) use only. Lithium Ion batteries and chargers are
covered by a 12 month warranty. Warranty excludes consumable parts. Guarantee claims
should be submitted before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the guarantee period.
The original guarantee period remains applicable to the device even if repairs are carried
out or parts are replaced. In such cases, the work performed or parts tted will not result
in an extension of the guarantee period, and no new guarantee will become active for the
work performed or parts tted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO
THE PLACE OF PURCHASE WITH YOUR REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts, consumables and
missing parts as set out in the service information in these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
SPARE PARTS
Spare parts can be ordered from the Special Orders Desk at your local
Bunnings Warehouse or Homebase store.
For further information, or any parts visit
www.ozito-diy.co.uk or contact Ozito Customer Service:
Great Britain: 0151 294 4488
Ireland: 1850 882711
E-mail: enquires@ozito-diy.co.uk
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
KNOW YOUR PRODUCT
1. CHANGING BLADES 3. INSERTING &
REMOVING THE BATTERY
2. BATTERY & CHARGING 4. CONTROLS & OPERATION(sold separately)
SETUP & PREPARATION OPERATION
1. Align the ribs of the battery with
the recess at the back of the
handle.
1. Press and hold the safety switch
and then squeeze the on/off
trigger to start.
1. Press and hold the battery
release tab and then slide out.
1. Slide the back of the
blade base into the
recess in the housing.
2. Slide the battery in so
that it clicks into place.
2. To stop operation,
release the on/off
trigger.
Inserting the Blade Base
Remove the Blade Base
Inserting a Battery (not included)
Removing a Battery
Switching On and Off
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted).
RED (Flashing) Battery is charging (low charge).
RED (Illuminated) Battery is charging (mid charge).
GREEN (Illuminated) Battery is 85% - 100% charged and ready for use.
BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging
temperature).
BOTH (Flashing) Defective battery. Never charge a defective battery
pack!
Remove battery pack from charger.
PXCGSS-018U
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND BATTERY DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING STEPS.
WEAR GLOVES, BLADES ARE SHARP.
CAUTION: THE CHARGER FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS).
ACCESSORIES
1 2 3 4 5 6
7 8
1. Base Release Button
2. Removable Base
3. Safety Switch
4. On/Off Trigger
5. Sure Grip Handle
6. Battery Seating
CORDLESS TRIMMER/SHEAR
Top cutting
Use a wide sweeping motion. A slight
downward tilt of the cutting blades in the
direction of motion gives the best cutting
results.
Side cutting
When trimming the sides of the hedge, begin
at the bottom and cut upwards. Trim the side
of a hedge so that it will be slightly narrower
at the top. This shape will expose more
of the hedge, resulting in a more uniform
growth.
7. Hedge Trimmer Blade
8. Grass Shear Blade
9. Blade Covers
The purchased battery will be shipped in a low charge condition, and requires charging
prior to use.
1. Connect the charger into a mains power outlet.
4. The charger LED will illuminate
red signifying that the battery is
charging.
3. With the charger sitting on a at
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the charger
ensuring a rm connection.
2. The charger LED will ash green
showing power is being supplied
to the charger.
5. The charger LED will illuminate
green once the battery is charged.
Charging your lithium ion battery - Fast Charger
Battery Charge Indicator
The purchased battery is equipped with a
battery charge indicator to show the state of
the battery charge.
Press the charge indicator button and look to
see which LED lights.
Battery requires
immediate charging
Low state of charge, requires charging soon.
Mid state of charge
Full state of charge.
Note: The battery needs to be removed from the tool to check the state of charge.
1. Connect the charger into a mains power outlet.
4. The charger LED will illuminate red signifying that the battery is
charging.
3. With the battery sitting on a at
surface, align the raised ribs on the
battery with the recess in the charger
and slide onto the battery ensuring a
rm connection.
2. The charger LED will ash green
showing power is being supplied
to the charger.
5. When removing the charger from the
battery, rst press the battery release
tab, then slide the charger from its
position.
Charging your lithium ion battery - Eco Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted).
RED (Illuminated) Battery is charging (low charge).
GREEN (Illuminated) Battery is charged and ready for use.
RED (Flashing) Battery or Charger fault.
RED & GREEN (Flashing) Battery pack is too hot or too cold (remove battery from
charger and store at room temperature 20ÂșC. Insert
battery again when at correct charging temperature). If
this happens again, the battery is defective and needs
to be replaced.
WARNING!: DO NOT USE ANY ATTACHMENTS
OR ACCESSORIES NOT RECOMMENDED BY THE
MANUFACTURER OF THIS PRODUCT, AS IT CAN
RESULT IN SERIOUS PERSONAL INJURY.
WARNING! CLEAR THE AREA TO BE CUT BEFORE
EACH USE. REMOVE ALL OBJECTS, SUCH AS CORDS,
LIGHTS, WIRE, OR STRING WHICH CAN BECOME
ENTANGLED IN THE CUTTING BLADE AND CREATE A
RISK OF SERIOUS PERSONAL INJURY.
2. Push the front of the
blade base into the
housing until it clicks
into place.
1. Press and hold the base
release button.
2. Remove the base by
lifting from the front and
then sliding out.
9
WARNING!: IF THE BLADE JAMS ON AN HIDDEN
ELECTRICAL CORD, DO NOT TOUCH THE BLADE!
IT CAN BECOME LIVE AND VERY DANGEROUS.
DISCONNECT THE ELECTRICAL SERVICE TO THE
DAMAGED LINE BEFORE ATTEMPTING TO FREE THE
BLADE.
Move the grass shear parallel to the ground. Direct the shear forward smoothly. Do not
sweep the shear from side to side as this will not allow the blade to cut properly.
Using the Grass Shear:
Note: Ensure the base is supported by hand when the release button is
pressed to prevent it falling unexpectedly.

Product specificaties

Merk: Ozito
Categorie: Grastrimmer
Model: PXCGSS-018U

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXCGSS-018U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Grastrimmer Ozito

Ozito

Ozito PXCLTK-218U Handleiding

16 Maart 2024
Ozito

Ozito PXCLTS-018U Handleiding

16 Maart 2024
Ozito

Ozito PXCGSS-018U Handleiding

13 December 2023
Ozito

Ozito LTR-3725U Handleiding

17 Juni 2023
Ozito

Ozito PXCGTK-150 Handleiding

5 Juni 2023
Ozito

Ozito PXCLTS-182U Handleiding

12 Mei 2023
Ozito

Ozito LTR-630U Handleiding

12 Mei 2023
Ozito

Ozito LTR-529U Handleiding

11 Mei 2023
Ozito

Ozito OGT-018 Handleiding

19 April 2023
Ozito

Ozito LTR-529 Handleiding

7 April 2023

Handleiding Grastrimmer

Nieuwste handleidingen voor Grastrimmer

Worx

Worx WG185E Handleiding

26 April 2024
Worx

Worx WG157E Handleiding

26 April 2024
Worx

Worx WG183E Handleiding

17 April 2024
Worx

Worx WG119E Handleiding

17 April 2024
Shindaiwa

Shindaiwa T236TS Handleiding

11 April 2024
Fieldmann

Fieldmann FZS 2107-E Handleiding

11 April 2024
Shindaiwa

Shindaiwa B45 Handleiding

11 April 2024
Shindaiwa

Shindaiwa B45LA Handleiding

11 April 2024
Grizzly

Grizzly ERT 3525 Handleiding

27 Maart 2024
Draper

Draper GTP34 Handleiding

27 Maart 2024