Ozito MSW-3000 Handleiding
Ozito
Zaagmachine
MSW-3000
Bekijk gratis de handleiding van Ozito MSW-3000 (7 pagina’s), behorend tot de categorie Zaagmachine. Deze gids werd als nuttig beoordeeld door 40 mensen en kreeg gemiddeld 4.9 sterren uit 20.5 reviews. Heb je een vraag over Ozito MSW-3000 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/7
MULTI
PURPOSE
SAW
500W
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 500W
Voltage: 230-240V ~ 50Hz
No Load Speed: 500-3000 /min
Stroke Length: 12mm
Blade Fitment: Universal
Cutting Capacity: Timber 100mm
Aluminium 6mm
Mild Steel 3mm
Weight: 2.5kg
MSW-3000
WHAT’S IN THE BOX
Multi-purpose Saw
Blades x 3
ozito.com.au
Hex Key
Spare Brushes
Downloaded from manuals search enginewww.Manualslib.com
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
1 Universal Blade
2 Front Handle
3 Variable Speed Dial
4 Safety Lock-off Switch
5 On/off Trigger
6 Rear Handle with Sure Grip
7 Spare Brushes
8 Hex Key
9 Metal Blade
10 Scrolling Blade
11 General Purpose Blade
1. FITTING BLADES
1. Insert the hex key into the blade locking screw. Turn anti-
clockwise to loosen the screw but do not remove it completely.
2. Insert the blade. Locate the hole in the blade over the
retaining pin and between the clamping plate and holder
shaft.
ACCESSORIES
SETUP & PREPARATION
MULTIPURPOSE SAW
Before you make any adjustments, make sure the power cord
is disconnected from the electricity supply.
3. Tighten the blade locking screw with the hex key.
Note: Periodically check that the blade is properly secured.
Downloaded from manuals search enginewww.Manualslib.com
OPERATION
2. CONTROLS 3. OPERATING THE MULTIPURPOSE SAW
1. Pull the safety lock-off
switch down and hold.
1. Scroll through the variable
speed dial to select the
appropriate speed for the
material being cut.
1. Securly clamp the workpiece.
3. Apply the saw to the workpiece, guide the blade back and forth in
a sawing motion to complete the cut.
2. Turn the multipurpose saw
on and wait for it to reach full
speed.
NOTE: ONLY SUPPLY SUFFICIENT PRESSURE TO
ALLOW THE BLADE TO DO THE CUTTING. DO
NOT FORCE THE OPERATION. BLADES COULD BE
DAMAGED IF EXCESSIVE PRESSURE IS APPLIED.
The tool is recommended for use with a residual current
device with a rated residual current of 30mA or less.
On/Off Switch
2. Squeeze the on/off
trigger.
Variable Speed Dial
3. To turn off, release the
on/off trigger.
MSW-3000
Downloaded from manuals search enginewww.Manualslib.com
Product specificaties
| Merk: | Ozito |
| Categorie: | Zaagmachine |
| Model: | MSW-3000 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito MSW-3000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zaagmachine Ozito
24 December 2024
23 Augustus 2024
23 Augustus 2024
23 Augustus 2024
30 Juli 2024
30 Juli 2024
9 Juli 2023
26 Juni 2023
24 Juni 2023
20 Juni 2023
Handleiding Zaagmachine
- Truper
- Parkside
- Proviel
- Porter-Cable
- Hitachi
- Black Decker
- Hilti
- Toolson
- Spear & Jackson
- Greenworks
- Stanley
- Yato
- Defort
- Powerblade
- Tacklife
Nieuwste handleidingen voor Zaagmachine
15 Juni 2025
15 Juni 2025
10 Juni 2025
10 Juni 2025
9 Juni 2025
7 Juni 2025
5 Juni 2025
3 Juni 2025
2 Juni 2025
2 Juni 2025