Ozito ATK-030 Handleiding

Bekijk gratis de handleiding van Ozito ATK-030 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.8 sterren uit 5 reviews. Heb je een vraag over Ozito ATK-030 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SUCTION FEED

SPRAY GUN

130-210 ml/min

INSTRUCTION MANUAL

SPECIFICATIONS

Working Air Pressure: 50psi (3Bar)

Max Air Pressure: 87psi (6Bar)

Air Consumption: 85-226L/min (3-8cfm)

Nozzle Size: ø1.5mm

Spray Width: 40-70mm

Flow Rate: 130-210ml/min

Feed Type: Suction

Paint Pot Size: 850ml

Air Inlet: 1/4” BSP

WHAT’S IN THE BOX

Spray Gun

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

CLEANING PROCEDURE

DESCRIPTION OF SYMBOLS

CARING FOR THE ENVIRONMENT

TROUBLE SHOOTING

Power tools that are no longer usable should not be disposed of

with household waste but in an environmentally friendly way. Please

recycle where facilities exist. Check with your local council authority

for recycling advice.

Recycling packaging reduces the need for landll and raw materials.

Reuse of recycled material decreases pollution in the environment.

Please recycle packaging where facilities exist. Check with your local

council authority for recycling advice.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

The benefits provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer

service helpline above.

SPARE PARTS

ozito.com.au

SPRAY GUN SAFETY WARNINGS

ATK-030

WARNING!Read all safety warnings and all instructions. Failure to follow the warnings

and instructions may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the

warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power

tool.

1. Work area safety

a. Cluttered or dark areas invite accidents. Keep work area clean and well lit.

b. Do not operate power tools in explosive atmospheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c. Distractions can cause you to lose Keep children and bystanders away while operating a power tool.

control.

d. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

e. Check the maximum pressure rating of any tools or accessories that you intend using with the

compressor. The output pressure of the air from the compressor must be regulated so that it never exceeds

the rated pressure of the tool or accessory.

f. Always wear safety goggles or glasses when using the air compressor. Never point the nozzle of an

accessory towards any part of your body or towards another person.

g. Use safety equipment including safety goggles or shield, ear protection, breathing or respirator mask and

protective clothing.

h. The tool must be used only for its prescribed purpose. Any use other than those mentioned in this Manual

will be considered a case of misuse. The user and not the manufacturer shall be liable for any damage or

injury resulting from such cases of misuse.

WARNING!In the event that an air line is cut or broken, the air supply must be turned o󰀨 at the

compressor. A broken air line which is not supported is extremely dangerous and can whip around

very quickly, both with the capability of striking people, and blowing foreign particles into the air.

•Do not attempt to catch the air line but immediately keep bystanders well clear and turn o󰀨 the air supply to

the hose, turn o󰀨 the compressor at the On / O󰀨 button, and then remove the hose from the compressor.

•This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given the supervision or

instruction concerning use of the appliance by a person responsible for their safety.

•Children should be supervised to ensure that they do not play with the appliance.

GENERAL AIR TOOL SAFETY WARNINGS

WARNING!

This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning use of

the appliance by a person responsible for their safety.

Using an Extension Hose

Always use an approved extension hose suitable for the air input of this tool. Before

use, inspect the hose for signs of damage, wear and ageing. Replace the extension

hose if damaged or defective.

When using an hose on a reel, always unwind the lead completely.

It is recommended that the hose is a maximum of 25m in length.

NEVER under any circumstances aim the nozzle at another person or animal.

• In the event of an injury occurring, seek medical advice immediately.

• The spray gun must not be used for spraying ammable paints and solvents with a

ash point of less than 21ºC.

•Always ensure there is adequate ventilation when spraying.

• The use of ear protection is recommended.

• Eye protection is recommended to keep hazardous vapours and liquids out of eyes.

•Always wear a face mask when spraying.

•Always read the paint manufacturers thinning instructions before using.

•Always keep the spray nozzle in place during use. Never allow the spray to come in

direct contact with the skin.

• Never immerse the spray gun in liquid.

• The spray gun must not be cleaned by using ammable liquids with a ash point of

less than 21ºC.

NEVER spray near a naked ame, including an appliance pilot light.

NEVER smoke whilst spraying.

NEVER allow children to operate or play with the spray gun.

• Before cleaning, always disconnect the appliance from the air supply.

• Always disconnect from air supply when relling the paint pot.

•After every use ensure you clean your spray gun thoroughly.

NEVER use the spray gun outside when it is raining.

0324

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from

the original date of purchase and isintended for DIY (Do It

Yourself) use only.If a product is defective it will be replaced in

accordance with the terms of this warranty. Warranty excludes

consumable parts.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other

than that specified on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the

instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

Warning

Read instruction

manual

Wear eye protection

and breathing mask

Cubic feet per minute

Wear ear protection

Millilitres per minute

ml/min

cfm

ProblemCauseRemedy

Little or no material

ow

Fluid adjustment dial too limitedTurn uid adjustment dial further

out clockwise

Air pressure too lowIncrease air pressure at the

compressor

Material too thickThin material

Nozzle cloggedClean nozzle

Material leaking

Nozzle looseTighten nozzle

Nozzle wornContact Ozito for replacement

spare parts

Spray pattern is

heavy in the middle

Fan requires adjustmentTurn fan adjustment dial further

out anti-clockwise

Air pressure too lowIncrease air pressure at the

compressor

Spray pattern

heavy at the edges

Fan requires adjustmentTurn fan adjustment dial in

clockwise

Air pressure too highReduce air pressure at the

compressor

Spray jet pulsates

Material in paint pot running outRell paint pot

Nozzle cloggedClean nozzle

Material too thickThin material

Pattern runs or

sags

Too much material is being

applied

Turn uid adjustment dial further

in clockwise

Increase spray speed

Material is too thinThicken material by adding more

paint

Too much

overspray

Gun too far from the spray

surface

Reduce distance & turn uid

adjustment dial further in

clockwise to reduce the amount

of paint being applied.

Pattern is very light

and splotchy

Material is too thickThin the material

Moving the spray gun to fastDecrease spray speed

Nozzle Assembly SPATK030-S4A

Needle Assembly SPATK030-S14A

Paint Pot Seal SPATK030-S32

Paint Pot SPATK030-S33

Spare parts can be ordered from the Special Orders Desk

at your local Bunnings Warehouse.

For further information, or any parts not listed here, visit

www.ozito.com.au or contact Ozito Customer Service:

Australia 1800 069 486

New Zealand 0508 069 486

E-mail: [email protected]

4 Connect the spray gun to the air

supply then spray solution into a

bucket.

3 Fill paint pot with appropriate

cleaning solution.

9 Dry all components and then re-assemble the spray gun.

5 Repeat steps 3-4 until the cleaning solution runs clear from gun.

If coating material was water based (acrylic paint), use ONLY

water when performing the cleaning procedure. Use of solvent

based cleaning materials on water based paints will result in a

new substance that will be extremely di󰀩cult to clean.

If coating material was oil based (enamel paint, lacquer etc.)

use ONLY the appropriate cleaning solution. Read the cleaning

instructions printed on the coating material’s label to determine

which cleaning material you need. The following solvent based

cleaning products are safe to use in the paint sprayer:

•Diggers Easy Cleanup Turpentine Substitute (highly

recommended)

•Mineral Turpentine

•Paint Thinner

1 Empty the paint pot of remaining

material.

2 Rinse paint pot, suction tube &

nozzle with cleaning solution. Wipe

all parts with a clean cloth.

6 Unscrew and remove uid

adjustment dial, needle & spring.

Clean all parts in cleaning solution.

7 Unscrew and remove nozzle.

Clean in cleaning solution.

8 Take note of the 4 holes on the

nozzle, if blocked clean carefully

using a small needle.

Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, VIC 3175, Australia.

Product specificaties