Ozito AIP-074 Handleiding

Bekijk gratis de handleiding van Ozito AIP-074 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.2 sterren uit 2 reviews. Heb je een vraag over Ozito AIP-074 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

U/LEDSET

ZERO

U/LEDSET

ZERO

WARNING!Read all safety warnings, instructions, illustrations and specifications provided with this

power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious

injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated

(cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases

or dust. Power tools create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs

with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions.Water entering a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord

away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric

shock.

e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected

supply. Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use

a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of

inattention while operating power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask,

non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source

and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or

energising power tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool

in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving

parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection can reduce dust-related hazards.

h)Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool

safety principles. A careless action can cause severe injury within a fraction of a second.

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do

the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power

tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety

measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of

parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool

repaired before use. Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into

account the working conditions and the work to be performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping

surfaces do not allow for safe handling and control of the tool in unexpected situations.

5) Service

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure

that the safety of the power tool is maintained.

WARNING!When using electric tools basic safety precautions should always be followed to reduce the

risk of fire, electric shock and personal injury.

Read the whole manual carefully and make sure you know how to switch the tool off in an emergency,

before operating the tool. Save these instructions and other documents supplied with this tool for future reference.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure

that they do not play with the appliance.

• Always check that the power supply corresponds to the voltage on the rating plate.

• The power supply for this product should be protected by a residual current device (rated at 30mA or less). A

residual current device reduces the risk of electric shock.

• Inspect tool cords periodically and if damaged have them replaced by a certified electrician.

• Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the

extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective.

• When using an extension lead on a reel, always unwind the lead completely. Do not use a damaged extension

lead, or an extension lead that is not suitable for the power input of the tool. Failure to do so may result in a risk

of fire and electric shock and will void the warranty.

AIR

INFLATOR

7.4V

INSTRUCTION MANUAL

SPECIFICATIONS

Powered by: Internal 7.4V Battery

Input USB-C: 5V/1A

Output USB-A: 5V/1A

Max Air Pressure: 150PSI

Battery Capacity: 2000mAh/7.4V 14.8Wh

LED Torch: 1V

Max Air Volume: 20 l/m

Charging Temperature: 5-40 °C

Working Temperature: 0-45 °C

No load Speed: 18,000 rpm

Charging Time: 2.5-4.5hrs

Weight: 0.52kg

AIP-074

STANDARD EQUIPMENT

3 YEAR REPLACEMENT WARRANTY*

Your product is guaranteed for a period of 36 months from the original date of purchase. If

a product is defective it will be replaced in accordance with the terms of this warranty. Warranty

excludes consumable parts, for example: valve adapters and accessories.

*This product is intended for DIY use only and replacement warranty covers domestic use.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other than that specified on the tool.

• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents

or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, VIC 3175, Australia.

ozito.com.au

7.4V Inflator

Air Hose

USB Charging Cable

Storage Bag

General Purpose Adapter

Ball Adapter

2 x Tire Adapters

0523

4. TROUBLESHOOTING

5. APPLIANCE CARE

MAINTENANCE

DESCRIPTION OF SYMBOLS

1. The power bank does not charge the device.If the unit is turned

off. Please reactivate it. Please charge the power bank when

the battery is dead.

Cleaning

1. We recommend that you clean the appliance immediately after

you use it.

2. Keep the safety devices free of dirt and dust as much as

possible. Wipe the equipment with a clean cloth.

3. Clean the appliance regularly with a damp cloth and some soft

soap. Do not use cleaning agents or solvents; these may be

aggressive to the plastic parts in the appliance. Ensure that no

water can get into the interior of the appliance.

4. Make certain that no water can enter the device can. Water

entering an electrical equipment raises the possibility of

receiving an electric shock.

Storage

Pull the mains plug out of the socket, switch off the tool and make

sure that it is secured in such a way that it cannot be started up

again by any unauthorised person.

Store the tool in a dry location which is not accessible to

unauthorised persons.

Supply Cords

If replacement of the supply cord is necessary, this has to be done

by a certified electrician in order to avoid a safety hazard.

Note: Ozito Industries will not be responsible for any damage or

injuries caused by the repair of the tool by an unauthorised person

or by mishandling of the tool.

Warning

Regulatory Compliance Mark

(RCM)

Wear hearing protection

V

Volts

L/min

Litres per minute

mAh

Milliampere hour

Wh

Watt Hour

Direct Current

W

No load speed

PSI

Watts

Per Square Inch

Read Instruction Manual

n

0

Power tools that are no longer usable should not

be disposed of with household waste but in an

environmentally friendly way. Please recycle where

facilities exist. Check with your local council authority for

recycling advice.

Recycling packaging reduces the need for landfill and raw

materials. Reuse of recycled material decreases pollution

in the environment. Please recycle packaging where

facilities exist. Check with your local council authority for

recycling advice.

CARING FOR THE ENVIRONMENT

SPARE PARTS

Spare parts can be ordered from the Special Orders Desk at your

local Bunnings Warehouse.

For further information, or any parts not listed here, visit

www.ozito.com.au or contact Ozito Customer Service:

Australia 1800 069 486

New Zealand 0508 069 486

E-mail: [email protected]

• Avoid using power tools for long periods of time without breaks. Vibration from tools can be transmitted into your

hands and arms.

• Always remove the plug from the mains socket before making any adjustments or performing maintenance.

• When using the compressor, ensure you are parked in a safe, well lit location, off the road and with the hand

brake engaged.

• Ensure your personal safety is not at risk and never use the air inflator while the car is in motion.

• Do not place the hose end against any part of your body when turned on, as this may infuse air into your blood

stream putting your health at serious risk.

• Do not make any alterations to this Compressor. Only use the adaptors supplied with this product.

• Use this product only in accordance with operation instructions included in this manual.

• Inspect each part before use. Do not use if bent, broken, melted, burnt or if the unit appears to be damaged.

• Check the tyre pressure before inflating. Never exceed the suggested pressure of the item being inflated. If

suggested pressure is exceeded, the item being inflated may burst.

• Do not bend or pinch the air hose while the Compressor is in use.

• It is not suggested that the Compressor work continuously for more than 10 minutes. If 10 minutes of use has

been reached, turn it off and let it cool for 10 minutes before using again.

• If the Compressor is making abnormal sounds or its temperature if quite high, turn off the power straight away

and let it cool for at least 10 minutes before trying again. Improper use may result in damage of the Compressor.

• Do not leave unattended and operating. Keep out of reach of children.

• Put the Compressor in a dry place if it is not in use for an extended period of time.

• Keep the Compressor away from flammable liquid or gas. Do not allow the Compressor to become wet.

• Never put the connector and adaptors into your mouth, ear or eye. They are not toys.

• Do not point LED at eyes of person or animals.

• Do not use batteries which have suffered deformation during the charging process or shows any other signs of

abnormalities including, excessive curvature of the housing, gassing, hissing or cracking.

• Never fully discharge the battery pack. A complete discharge of the battery pack will lead to premature ageing

of the battery cells.

• Never charge the batteries unsupervised.

• Do not cover or place any object on top of the charger, place the charger away from heat sources.

• To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting

the charger.

• Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage

or stress.

• An extension cord should not be used unless necessary. Use of an improper extension cord could result in the

risk of fire, electric shock or electrocution.

• Do not use the cordless tool or the battery charger near vapours and inflammable liquids.

Battery Dafety Warnings

• The battery pack is not fully charged out of the carton. First read the safety instructions and then follow the

charging notes and procedures.

• For optimum battery performance avoid low discharge cycles. Charge the battery pack frequently.

• Use and store the battery pack in dry conditions with low humidity between 0-50°C, ideally at 15°C. Avoid

exposing battery pack and charger to direct sunlight.

• Do not keep battery pack in places where temperatures are liable to reach over 50°C, such as in a car, metal

shed or similar that is in direct sunlight.

• Do not ignite the battery pack or expose it to fire. There is a risk of explosion!

• Do not exhaustively discharge batteries. Exhaustive discharge will damage the battery cells. The most common

cause of exhaustive discharge is long-term storage and continued use of low-charge batteries. Always store the

battery with some charge. Charge the batteries every 2-3 months to restore charge. Stop working as soon as the

performance of the battery falls noticeably or the electronic protection system triggers.

• Protect batteries and the tool from overloads. Overloads will quickly result in overheating and cell damage inside

the battery housing without this overheating being apparent externally.

• Avoid damage and shocks. Do not use batteries which have been dropped from a height of more than one meter

or strong external impact, even if the housing of the battery pack appears to be undamaged. The battery cells

inside the battery may have suffered serious damage.

• If the battery pack suffers overloading and overheating, the integrated protective cut-off will switch off the

equipment.

• Do not press the ON/OFF switch on the tool if the protective cut-off has actuated. This may damage the battery

• Allow the battery to cool to room temperature before use.

• Use only original battery packs. The use of other batteries may result in injuries, explosion and a fire risk.

• Protect your rechargeable battery against moisture, rain and high humidity. Moisture, rain and high humidity can

cause dangerous cell damage. Never charge or use batteries which have been exposed to moisture, rain or high

humidity.

• Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack is damaged, do

not use the battery.

• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If accidental contact occurs,

flush with water and seek medical help immediately. Liquid ejected from the battery may cause irritation or

burns.

• Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or risk of injury.

• Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above

130°C may cause explosion.

• Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer.

• Do not disassemble Battery. This may result in a risk of electric shock, electrocution or fire.

• Do not use damaged battery chargers

• The battery pack may become warm during use. Allow the battery pack to cool to room temperature before

commencing with the charging.

• Do not over-charge batteries. Do not exceed the maximum charging times. These charging times only apply to

discharged batteries. Frequent insertion of a charged or partly charged battery pack will result in over-charging

and cell damage. Do not leave fully charged batteries in the charger.

• Charge the battery pack in dry conditions with low humidity between 5-40°C. Avoid exposing battery pack and

charger to direct sunlight.

INFLATOR SAFETY WARNINGS

GENERAL POWER TOOL SAFETY WARNINGS

ELECTRICAL SAFETY

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY

YOU MUST RETURN THE PRODUCT TO YOUR NEAREST

BUNNINGS WAREHOUSE WITH YOUR BUNNINGS

REGISTER RECEIPT. PRIOR TO RETURNING YOUR

PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR

CUSTOMER SERVICE HELPLINE:

Australia: 1800 069 486

New Zealand: 0508 069 486

The benefits provided under this warranty are in addition to other rights and remedies which

are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to a

replacement or refund for a major failure and for compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the

goods fail to be of acceptable quality and the failure does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this warranty,

however, where you have suffered any additional direct loss as a result of a defective product

you may be able to claim such expenses by contacting our customer service helpline above.

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE

THE MODEL NUMBER AND DATE OF PURCHASE

AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE

WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS

YOU MAY HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

Product specificaties