OSD Audio AMP200 Handleiding

OSD Audio Receiver AMP200

Lees hieronder de 📖 handleiding in het Nederlandse voor OSD Audio AMP200 (6 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 73 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

MI5

OWNER’S MANUAL

Powered Amplifier

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD,

RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT

BLADE EXPOSURE.

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT.

Warning: To reduce the risk of

Electric shock, do not remove

Cover (or back) no user

Servicing to qualified service

Personnel.

The exclamation point within the

Equilateral triangle is intended to

Alert the user to the presence of

Important operating and

Maintenance (servicing)

Instructions in the literature

Accompanying suppliance.

1. Read these instructions.

2. Keep these instructions.

3 Read all warnings.

4 Follow all Instruction.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions.

8. Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus

( Including amplifiers) that Produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two

Blades with one wider than the other. A grounding type plug has two blades and a third grounding

Prong. If the provided plugs does not fit Into your outlet, consult an electrician for replacement of

The obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience

Receptacles, and at the point where they exit form the appliance.

11. Only use attachments or accessories specified by the manufacturer.

12. Unplug the apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been

Damaged in anyway, such as power supply cord or plug is damaged, liquid has been spilled or

Objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does

Not operate normally, or has been dropped.

This appliance shall not be exposed to dripping or splashing water and no object filled with liquids

Such as vases shall be placed on apparatus.

This Lighting flash with arrowhead

Symbol, within an equilateral triangle,

Is intended to alert the use to the

Presence of un-insulated dangerous

Voltage within the products enclosure

That may be of sufficient magnitude

To constitute a risk of electric shock

To persons.

The MI5 Powered Amplifier can be turned on and off independently

via a switch on the front panel, by signal sensing, or remotely by a

triggered DC input. There is a switch located on the lower edge of

the rear panel of the amplifier to select how you would like to turn

on the MI5 power Amplifier. If you would like to control the unit’s

power On/Power off status manually from the front, place the

switch in the unit’s power On/Power off status by means of signal

sensing, place the switch in the “Auto On” position. If you would

like to control the unit’s power On/Power off status by a DC

Remote trigger, place the switch in the ”TRIGGER” position, and

connect the remote triggering device to the terminal labeled “

TRIGGER IN” next to the switch.

MI5Powered

Ampl ifier

Congratulations on your purchase of OSD Powered Amplifier.

Note: If any part of this product is damaged or missing,

Please call OSD Audio Return Department

At (714) 447-9880

Using the controls/ Front Panel

Power

MI6 Powered Amplifier. Please take a few moments to read this

entire manual, and be sure to retain this document for future

reference please read and observe all safety instructions detailed

on page.

The front panel switch will manually switch the MI5 Powered

Amplifier on or off. A blue led behind the faceplate lens indicates its

power status. Whenever the amplifier’s power switch is in the “ON”

position and the amplifier is in ”active” status the lens is illuminate

blue. If the amplifier is “ON” but in the “standby” status the lens is

illuminated RED.

You should use a 3.5mm phone plug in the “IN” connector to make

this connection. The tip of the connector is positive, and the sleeve

of the connector is negative. A second terminal in the same block is

labeled “OUT”. This allows for remote turn-on of other devices

when the MI5 powered Amplifier is powered on. Use the same

polarity for the terminals of this plug. Please read the owner ’s

manual for any devices you are attempting to connect in this

manner to ensure compatibility.

Note: The front panel power switch must be in the “ON”

Position for the triggers or “Auto ON” features to operate.

MODEL MI5

Using The Controls/ Back Panel

Power

Product specificaties

Merk:	OSD Audio
Categorie:	Receiver
Model:	AMP200
Kleur van het product:	Zwart
Breedte:	- mm
Diepte:	- mm
Hoogte:	- mm
Gebruikershandleiding:	Ja
Gebruiksaanwijzing:	Ja
Aan/uitschakelaar:	Ja
Connectiviteitstechnologie:	Bedraad
Snelstartgids:	Ja
Stroomverbruik (in standby):	1 W
Volumeregeling:	Draaiknop
Ingang stroom:	Ja
Bedoeld voor:	Thuis
Impedantie:	8 Ohm
Audio-uitgangskanalen:	2.0 kanalen
Frequentiebereik:	20 - 20000 Hz
Signaal/ruis-verhouding:	103 dB
Crosstalk (1kHz):	65 dB
Totale harmonische vervorming (THD):	0.2 procent
Regeling van bass-niveau:	Ja
AC-ingangsspanning:	110-220 V
Stroomverbruik (typisch):	700 W
Treble adjustment:	Ja
Piekvermogen per kanaal:	250 W
Synchronisatie ingangsimpedantie:	8 Ohm
Speakers connectiviteit type:	XLR / 1/4" / RCA
RMS vermogen uitvoer per kanaal (4 Ohm):	125 W
RMS vermogen uitvoer per kanaal (8 Ohm):	80 W
Output impedance:	2 Ohm
Bridge-mode vermogen uitvoer per kanaal (8 Ohm):	250 W
Gain aanpassing:	Draaiknop
RMS vermogen uitvoer per kanaal (2 Ohm):	200 W
Aantal Speakon poorten:	2