Canor Verto D4S Handleiding
Pagina's 12 Receiver
Bekijk de handleiding van Canor Verto D4S gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
USER MANUAL
CANOR VERTO D 4S
Solid-State DAC
Dear Music Lover,
Thank you for purchasing our CANOR VERTO D4S Digital to Analog Converter. To preserve and maintain
the best performance of your device, we recommend you carefully read the following lines.
Verto D4S uses a dual ESS Sabre ESS9038Q2M chipset, configured for high dynamic range and ultra-low
noise performance. The analog output stage is entirely discrete, with no operational amplifiers in the signal
path.
SAFETY INSTRUCTIONS
Please read before putting the device into operation.
1.Read the instructions all safety information and instructions should be read before using the –
device.
2.Keep the user manual the safety and user instructions manual should be stored for possible later –
use.
3.Follow the instructions all safety and user instructions should be followed. –
4.Water and moisture the Verto D4S DAC should not be placed near water, for example near –
bathtubs, swimming pools, kitchen sinks, etc.
5.Accessories do not use accessories not recommended by the manufacturer. –
6.Placement do not place a device on an unstable pad. The device may fall, which can cause serious –
injuries to children or adults, as well as damage to the device. Use only pads or racks recommended
by the manufacturer or pads sold to dealers with this device. Any placement of the device should
be in accordance with the manufacturer's instructions and only accessories recommended by the
manufacturer should be used.
7.Ventilation the unit should be placed the way to ensure proper airflow. That means it is not –
allowed to place the device on a sofa, or on upholstered furniture. The DAC may not be covered
over when in operation; it would otherwise prevent proper airflow around the vent holes of the
device.
8.Heat – DAC must be placed to avoid the heating effect from heat sources, for example, radiators or
stoves, or other heat-producing equipment. The distance from the back wall of the unit may not be
less than 20 cm, and 20 cm above the area of Verto D4S may not be any barrier. Alongside the unit
should be ensured 20 cm minimum distance from other objects.
9.Power source the device must be connected only to a main supply for what it is designed for. –
10.Power cord it is necessary to pay particular attention to a power cord, it must be positioned to –
avoid setting foot on it and ensure it is protected against mechanical damage.
11.If you do not use the DAC for a longer period –you should disconnect the power cord from the
mains supply or at least turn off the main power switch located on the back panel.
12.Objects containing liquid do not place these objects (vases, flowerpots), so that they can fall on –
the amplifier and, eventually, prevent the liquid from being leaked out on the amplifier.
13.Damages requiring service equipment should be repaired only by qualified service if: –
a.The power cord is damaged.
b.The device dropped into the water or was poured.
c.The device was exposed to rain.
d.The device works incorrectly.
e.The device fell on the ground or is otherwise mechanically damaged.
14.Repairs all repairs must be entrusted to a qualified service. –
15.General warning use the device only in accordance with this user guide. –
The manufacturer declines any liability should these safety measures not be observed. To help you avoid
an electric shock, do not expose the device to rain or moisture!
DELIVERY CONTENT
•Shipping packaging
•CANOR VERTO D4S Digital to Analog Converter
•Remote control (2 x AAA battery required)
•Power cord
•CANOR VERTO D4S User Manual
FRONT PANEL
•CENTRAL DISPLAY – 7-inch touchscreen with direct access to all device settings
BACK PANEL
•USB Digital Input – USB type-C digital input
•AES/EBU Digital Input – 3pin XLR digital input
•COAX Digital Input – Coaxial digital input
•OPTO 1, OPTO 2 Digital Input – Optical digital inputs
•TV Digital Input – digital input TV
•XLR Analog Output – Left / Right XLR balanced analog output
•RCA Analog Output – Left / Right RCA unbalanced analog output
•TRIGGER IN – 3.5mm jack trigger input (12V)
•TRIGGER OUT – 2 x 3.5mm jack trigger output () 12V
•Power –Mains power inlet
•Power Switch –Mains power switch
Product specificaties
| Merk: | Canor |
| Categorie: | Receiver |
| Model: | Verto D4S |
Heb je hulp nodig?
Als je hulp nodig hebt met Canor Verto D4S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden