Oricom CU850 Handleiding

Bekijk gratis de handleiding van Oricom CU850 (1 pagina’s), behorend tot de categorie Baby product. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.2 sterren uit 6 reviews. Heb je een vraag over Oricom CU850 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

CU- -850 20140905

CU 085 PT

User Guide

1.0 Getting started

The CUbe850PT baby unit (camera) suits SC8504.3" Video Baby Monitor. Up to 4 baby units (cameras) can registered

to unit. one parent

2.0 Registering the Baby Unit (Camera)

FOR ALL OTHER INSTRUCTIONS, PLEASE REFER TO YOUR SC850

USER GUIDE.

1.1 Power supply

a)otherConnect small baby the plug power of the adaptor to the unit the and

end to the electrical mains power outlet.

b)To the to the ON switch the unit, on baby slide power switch

position. The power LED will light up.

c)To switch off the baby unit, slide the power switch to the OFF position.

1.2 Connecting and aligning the baby unit

Position the baby unit with a minimum distance of 1m to other electronic devices,

otherwise there is a risk of mutual disturbance. Point the upper section of the baby

unit towards the baby or object you want to monitor. Check that the baby or object is

suitably displayed on the parent unit screen. Ensure the antenna is extended

vertically for optimum range.

Use only the AC with the as other power adaptor supplied product

adaptors could damage the product. This product is designed for

indoor use only.

Theparentandbabyunitarepre-registered. Registrationcanalso be completedmanually:Upto4babyunitscanbe

registeredtoone parent unit. follow the procedure below: Tore-registeryourbabyunit,orregisteranewbabyunit,

(1) Switch on the parent unit.

(2) On monitor <Camera> mode, press and hold key for 5

seconds, it will go to registration mode.

(3)[press After registration icon ] comes up on screen,

<▲> or <▼> to select the camera channel [C1] or [C2] or [C3] or

[C4] that you want the baby unit to pair with.

(4)Press and release <Menu> key to confirm which camera

number to be registered.

(5) The Link LED then flashes rapidly for 10 seconds.

(6) Switch the baby unit ON. Press the pair key once

(at the back of the camera).

(7)Ifr egistration video iscompleted,c amera appearson

LCDscreena ndreturntonormalmode.Babyunitwill

return to normal mode too.

(8) If the registration expired registration time is or is failed,

[Out Range] appears on LCD. Should this of occur,

please attempt the registration process once more.

NOTE:

If articular ap channelhadbeenregisteredalregister ready, this

particular over-writtregistration.channel again will e he old

Product specificaties