OmniMount 5.0 Handleiding

OmniMount luidsprekersteun 5.0

Bekijk gratis de handleiding van OmniMount 5.0 (1 pagina’s), behorend tot de categorie luidsprekersteun. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.8 sterren uit 1.5 reviews. Heb je een vraag over OmniMount 5.0 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/1

5.0 SPEAKER MOUNT USER’S GUIDE

REQUIRED TOOLS

A. 5/32” hex wrench (supplied)

Drill bits:

B. Wood 5/32”

C. Drywall - ¼”

D. Masonry - 5/16” carbide tipped

E. Crescent or 7/16” (11mm) open end wrench

F. Phillips screwdriver

G. Electric drill

H. Hammer (masonry only)

CLAMP ASSEMBLY

ORIENTATION

Orientation du bloc d’attache

Orientación de la sujeción

Ausrichtung des Halterungssatzes

Orientamento della mensola

Oriëntatie van klemstuk

ATTACHING THE BALL SHAFT

Fixation du raccord à tête sphérique

Atornillar el eje giratorio

Anbringen der Kugelgelenkstange

Collegamento del braccio

Vastmaken van kogelas

1. MOUNTING THE CLAMP ASSEMBLY

A) Mark Location

Mark mounting holes with pencil

B) Mounting onto Wooden Stud. Use 5/32” drill bit

Minimum mounting hole depth: 2” (51mm)

C) Drywall Mounting

Use ¼” drill bit

Insert anchor into hole

D) Mounting into Masonry

5/16” (8mm) carbide tipped bit and masonry or hammer drill.

Wear eye protection.

Minimum mounting hole depth: 2” (51mm)

Insert anchor into hole

E) Mount Clamp Assembly

Attach clamp assembly with supplied screws.

2. JOINING BALL SHAFT AND CLAMP ASSEMBLY

Open clamp assembly enough to accept ball.

“Pop” ball into the clamp assembly.

Set speaker to desired position.

Tighten clamp assembly until snug.

Note: Speaker weight must be fully supported

during the tightening process.

3. FINAL ADJUSTMENTS

Use tool to tighten in 1/2 turn increments.

Do not over tighten.

To change speaker angle, loosen tension screw,

re-position speaker, then re-tighten tension screw.

To rotate speaker cabinet, loosen jam nut, rotate

speaker into desired position, then re-tighten jam nut

4. SECURING THE SPEAKER WIRE

KIT SPECIFICATIONS

Spécifications de l’ensemble

Especificaciones del Kit

Spezifikation des Montagesatzes

Caratteristiche tecniche

Specificaties van de kit

MOUNTING OPTIONS

Possibilités de montage

Posibilidades de instalación

Montagemöglichkeiten

Opzioni di montaggio

Montageopties

PART#: 1002014

Product specificaties

Merk:	OmniMount
Categorie:	luidsprekersteun
Model:	5.0
Kleur van het product:	Wit
Montagewijze:	Muur
Maximale gewichtscapaciteit:	2.3 kg
Horizontaal draaibaar:	0 - 360 °
Bereik kantelhoek:	-30 - 30 °