Omega Speedmaster Mark II Handleiding

Bekijk gratis de handleiding van Omega Speedmaster Mark II (2 pagina’s), behorend tot de categorie Horloge. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.3 sterren uit 3 reviews. Heb je een vraag over Omega Speedmaster Mark II of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1 / 2

SPEEDMASTER

MARK II CO-AXIAL CHRONOGRAPH 42.4 X 46.2MM

Steel on steel

Caliber

3330 327.10.43.50.06.001

VCo-Axial escapement

]Si14 silicon balance spring

lAutomatic

UChronometer

ZTachymeter

oSapphire crystal

tAnti-reflective treatment on both sides

F4-year International Warranty

TWater-Resistant to a relative pressure of 10 bar

(100 metres/330 feet)

WATCH FUNCTIONS

The crown has 2 positions:

1. Normal position (wearing position): when the crown is positioned against the

case, the crown ensures that the watch is water-resistant.

Occasional winding: if the watch has not been worn for 45 hours or more, wind it

up with the crown in position 1.

2. Time setting: hours – minutes – seconds. Pull the crown out to position 2. The

seconds hand will stop. Turn the crown forwards or backwards. Synchronise the

seconds by pushing the crown back to position 1 to coincide with a given time

signal.

Correcting the date:press the corrector (C) positioned at 10 o’clock.

CHRONOGRAPH FUNCTIONS

• Pusher A: start – stop, start – stop, etc.

Timing to 1/8 of a second for up to 12 hours.

• Pusher B: reset (after a stop).

Product specificaties