Omega Diver 300M CO-AXIAL Handleiding

Bekijk gratis de handleiding van Omega Diver 300M CO-AXIAL (2 pagina’s), behorend tot de categorie Horloge. Deze gids werd als nuttig beoordeeld door 81 mensen en kreeg gemiddeld 5.0 sterren uit 7 reviews. Heb je een vraag over Omega Diver 300M CO-AXIAL of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1 / 2

SEAMASTER

DIVER 300 M CO-AXIAL 41 MM

Steel on steel

Caliber

2500 212.30.41.20.01.002

VCo-Axial escapement

lAutomatic

UChronometer

oSapphire crystal

rAnti-reflective treatment

dScrew-in crown

qHelium escape valve

G3-year International Warranty

sWater-Resistant to a relative pressure of 30 bar

(300 metres/1000 feet)

WATCH FUNCTIONS

The crown has 3 positions:

1. Normal position (wearing position): when the crown is positioned against the

case, the crown ensures that the watch is water-resistant.

Occasional winding: if the watch has not been worn for 48 hours or more, wind it

up with the crown in position 1.

2. Correcting the date: pull the crown out to position 2, turn the crown

backwards, then push the crown back to position 1.

NB: date-setting is not recommended between 8 pm and 2 am.

3. Time setting: hours – minutes – seconds. Pull the crown out to position 3. The

seconds hand will stop. Turn the crown forwards or backwards. Synchronise the

seconds by pushing the crown back to position 1 to coincide with a given time

signal.

Product specificaties