Omega Seamaster Planet Ocean Handleiding

Bekijk gratis de handleiding van Omega Seamaster Planet Ocean (3 pagina’s), behorend tot de categorie Horloge. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.2 sterren uit 7 reviews. Heb je een vraag over Omega Seamaster Planet Ocean of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1 / 3

SEAMASTER

PLANET OCEAN 600 M OMEGA CO-AXIAL CHRONOGRAPH 45.5MM

Titanium on rubber strap

Caliber

9300 232.92.46.51.03.001

VCo-Axial escapement

HTitanium

]Si14 silicon balance spring

lAutomatic

UChronometer

iTime zone function

oSapphire crystal

tAnti-reflective treatment on both sides

DSapphire crystal case back

dScrew-in crown

qHelium escape valve

BLiquidmetal®

F4-year International Warranty

éWater-Resistant to a relative pressure of 60 bar

(600 metres/2000 feet)

WATCH FUNCTIONS

The crown has 3 positions:

1. Normal position (wearing position): when the crown is positioned against the

case, the crown ensures that the watch is water-resistant.

Occasional winding: if the watch has not been worn for 60 hours or more, wind it

up with the crown in position 1.

2. Setting the time zone and correcting the date: pull the crown out to position

2. Turn the crown forwards or backwards, and the hour hand will move forwards

or backwards by 1-hour intervals. By passing the hour hand over midnight, the

date can be changed forwards or backwards. Push the crown back to position 1.

NB: when changing the time zone backwards, it is necessary to move the hour

hand back past 7 pm to ensure the date changes.

3. Time setting: hours – minutes – seconds. Pull the crown out to position 3. The

seconds hand will stop. Turn the crown forwards or backwards. Synchronise the

seconds by pushing the crown back to position 1 to coincide with a given time

signal.

CHRONOGRAPH FUNCTIONS

• Pusher A: start – stop, start – stop, etc.

Timing to 1/8 of a second for up to 12 hours.

• Pusher B: reset (after a stop).

Product specificaties