Omega Seamaster Diver Handleiding

Bekijk gratis de handleiding van Omega Seamaster Diver (2 pagina’s), behorend tot de categorie Horloge. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.1 sterren uit 2 reviews. Heb je een vraag over Omega Seamaster Diver of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1 / 2

SEAMASTER

DIVER 300 M CO-AXIAL 36.25 MM

Steel on steel

Caliber

2500 212.30.36.20.01.002

VCo-Axial escapement

lAutomatic

UChronometer

oSapphire crystal

tAnti-reflective treatment on both sides

dScrew-in crown

qHelium escape valve

G3-year International Warranty

sWater-Resistant to a relative pressure of 30 bar

(300 metres/1000 feet)

WATCH FUNCTIONS

The crown has 3 positions:

1. Normal position (wearing position): when the crown is positioned against the

case, the crown ensures that the watch is water-resistant.

Occasional winding: if the watch has not been worn for 48 hours or more, wind it

up with the crown in position 1.

2. Correcting the date: pull the crown out to position 2, turn the crown

backwards, then push the crown back to position 1.

NB: date-setting is not recommended between 8 pm and 2 am.

3. Time setting: hours – minutes – seconds. Pull the crown out to position 3. The

seconds hand will stop. Turn the crown forwards or backwards. Synchronise the

seconds by pushing the crown back to position 1 to coincide with a given time

signal.

Product specificaties