Omega Double Eagle Handleiding

Bekijk gratis de handleiding van Omega Double Eagle (2 pagina’s), behorend tot de categorie Horloge. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.6 sterren uit 6 reviews. Heb je een vraag over Omega Double Eagle of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1 / 2

CONSTELLATION

DOUBLE EAGLE CO-AXIAL CHRONOGRAPH

Titanium on rubber strap

Caliber

3313 121.92.35.50.01.001

VCo-Axial escapement

lAutomatic

UChronometer

oSapphire crystal

tAnti-reflective treatment on both sides

DSapphire crystal case back

G3-year International Warranty

TWater-Resistant to a relative pressure of 10 bar

(100 metres/330 feet)

WATCH FUNCTIONS

The crown has 3 positions:

1. Normal position (wearing position): when the crown is positioned against the

case, the crown ensures that the watch is water-resistant.

Occasional winding: if the watch has not been worn for 44 hours or more, wind it

up with the crown in position 1.

2. Correcting the date: pull the crown out to position 2, turn the crown forwards,

then push the crown back to position 1.

NB: the date cannot be corrected between 8:30 pm and 1 am.

3. Time setting: hours – minutes – seconds. Pull the crown out to position 3. The

seconds hand will stop. Turn the crown forwards or backwards. Synchronise the

seconds by pushing the crown back to position 1 to coincide with a given time

signal.

CHRONOGRAPH FUNCTIONS

• Pusher A: start – stop, start – stop, etc

Timing to 1/8 of a second for up to 12 hours.

• Pusher B: reset (after a stop).

Note: resetting/zeroing of the sub dials must only be carried out after the

chronograph has stopped. Never push the chronograph’s two pushers (A and B)

simultaneously.

Product specificaties