NUVO Decker 60/4641 Handleiding

Bekijk gratis de handleiding van NUVO Decker 60/4641 (2 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 54 mensen en kreeg gemiddeld 4.9 sterren uit 3 reviews. Heb je een vraag over NUVO Decker 60/4641 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ASSEMBLY INSTRUCTION

SKU#60/4541, 1 60/464

NOTE:Please consult a qualied electrician if you are not certain of the installation or service.

CAUTION:Before starting the installation or service, disconnect the power by turning o the circuit

breaker or by removing the fuse at the fuse box.

1.Carefully unpack the xture, lay out all parts on a clean surface.

2.Fasten the cross bar onto the outlet box by using provided 2 outlet box screws.

3.Tie ground wire from outlet box and from xture to the ground screw on the cross bar. Connect white wire

from xture to white wire (neutral wire) from supply circuit. Connect black wire from xture to black wire

(live wire) from supply circuit. Cover connections using provided wire connectors.

4.Place the xture body to the wall by aligning the protruding mounting screws all the way through the wall

plate and tighten lock nuts to the mounting screws until the xture body is held rmly against the wall.

5.Unscrew the socket rings and socket covers from the sockets. Place the shade A and shade B and socket

cover over the socket, refasten the socket ring to secure them.

6.Install the bulb ot included). (N

7.Turn on the power.This xture can be installed as an up-light or down-light position. a

A Satco Product

Product specificaties