Numark NS7III Handleiding
Pagina's 120 Niet gecategoriseerd
Bekijk de handleiding van Numark NS7III gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

UserGuide
English ( 2 – 23 )
Guía del usuario
Español ( 24 – 45 )
Guide d’utilisation
Français ( 47 – 70 )
Guida per l’uso
Italiano ( 71 – 93 )
Benutzerhandbuch
Deutsch ( 94 – 117 )
Appendix
English ( 118 – 119 )

2
User Guide (English)
Introduction
Box Contents
NS7III
2 Platter Assemblies
•Aluminum Platter
•Slipmat
•Vinyl
•45 RPM Adapter (attached)
Spindle Screw
Allen Wrench
Display Unit
Display USB Cable
Display Power Cable
Serato DJ™ Software (download)
USB Cable
Power Cable
Quickstart Guide
User Guide (download)
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit numark.com.
For additional product support, visit numark.com/support.

3
Setup
Before getting started:
•Read the Safety & Warranty Manual before using NS7III.
•Make sure all items listed in Introduction > Box Contents are included.
1. Assemble the Platters
1.Remove NS7III from the packaging. Remove the two platter assemblies from package
(underneath NS7III). Place NS7III on a flat, stable surface for operation. Ensure unit has
adequate air flow to all ventilation ports (especially if installed in a case).
2.Place the platter onto NS7III by aligning the pins in the bottom of the
platter with the holes in NS7III’s motor.
3.Place the slipmat onto the platter, then place the vinyl over the
slipmat.
4.Line up the notch in the spindle with the screw in the vinyl’s 45
RPM adapter. Use the allen wrench (included) to tighten the
screw, locking the adapter to the spindle.
Product specificaties
| Merk: | Numark |
| Categorie: | Niet gecategoriseerd |
| Model: | NS7III |
Heb je hulp nodig?
Als je hulp nodig hebt met Numark NS7III stel dan hieronder een vraag en andere gebruikers zullen je antwoorden