Numark Axis 8 Handleiding


Pagina's 20 Niet gecategoriseerd

Bekijk de handleiding van Numark Axis 8 gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag

AXIS 8/9
Tabletop CD Players
Reference Guide
©2002 Industries
http://www.numark.com
-2-
Table of Contents
2
Basic Operation
Play, Pause, Cue, Pitch, General CD control 3
Advanced Operations
Setting Cue Points 5
Saving Cue Points 6
Beatkeeper Operation 7
Adjusting Pitch/ Aligning Beats 8
Looping 9
Stuttering (Hot Starts) 11
Key Lock / Key Change 12
Effects 13
Program Functions
(A MUST READ!!!)
17
Relay 18
Fader Start 19
Remote Start 19
Updating your Software 20
-3-
BASIC OPERATIONS
Open/Close:
Press to load or eject the disc. The drawer will
automatically close to protect the tray from accidental damage
while open.
NOTE: Tray will not open if the disc is in play.
In order to program the automatic close time press and hold
“
PROG
”
followed by
“
OPEN/CLOSE
”
. The display will indicate
options of 30 seconds, 60 seconds, 120 seconds, and (no) for no
auto close. This setting will be remembered at power down.
Play/Stutter:
Starts the music from either the first set cue point or
the last point of pause. By starting from the last pause point
while the unit is paused a new cue point is set. Pressing this
button while the unit is in play restarts the unit from the last cue
point, creating a
“
stutter
”
effect.
Startup speed of initial play can be adjusted by pressing
“
PROG
”
followed by
“
PLAY/STUTTER
”
and then rotating the wheel until
the desired seconds of startup are shown. Pressing
“
PROG
”
followed by
“
PLAY/STUTTER
”
twice will toggle startup between
0 to the desired seconds. This setting will be remembered at
power down.
Pause:
Stops the music while in play. Pressing play following this sets
a new cue point. Holding down the button while scratching or
stuttering the music will stop the music at the current position,
allowing you to capture a loop in or cue point.
Pause speed (BRAKING) can be adjusted, by pressing
“
PROG
”
followed by
“
PAUSE
”
and then rotating the wheel until the
desired seconds of startup are shown. Pressing
“
PROG
”
followed
by
“
PAUSE
”
twice will toggle startup from 0 to the desired
seconds. This setting will be remembered at power down.
Cue:
Returns and pauses the music at the last set cue point. The cue
point is the last place in which the unit was paused and then play
was pressed. Pressing a second time allows for
temporary play of this point. You can easily edit
the cue point by turning the wheel. As you
rotate the wheel the music will sound. By
stopping the wheel and pressing play a new
point is set.
The sound during wheel rotation can be adjusted from a smooth
“
scratch
”
sound to the traditional
“
stutter
”
sound. To alternate
modes hold
“
PROG
”
followed by
“
CUE
”
. The display will indicate
when the scratch sound is active. This indication
will go away when the style of cue is stutter. This setting will be
remembered at power down.

Beoordeel deze handleiding


Product specificaties

Merk: Numark
Categorie: Niet gecategoriseerd
Model: Axis 8

Heb je hulp nodig?

Als je hulp nodig hebt met Numark Axis 8 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden