Numark Axis 4 Handleiding
Pagina's 12 Niet gecategoriseerd
Bekijk de handleiding van Numark Axis 4 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

AXIS 4
PROFESSIONAL CD PLAYER
Quick Start Owner’s Manual
Manual Rápido Del Comienzo (ESPAŃOL)
Schnelles Hinweisbuch (DEUTSCH)
Manuel d’utilisation du propriétaire
(FRANÇAIS)
Manuale rapido di utilizzazione (ITALIANO)
BOX CONTENTS
•CD PLAYER
•POWER CABLE
•AUDIO CABLE
•FADER START CABLE
CONTENIDO DE LA CAJA
•LECTOR DE CD
•CABLE DE LA CORRIENTE ALTERNA
•CABLE AUDIO
•CABLE DEL FADER START
Contenu de la boîte
•Lecteur de CD
•Cable d’alimentation
•Cable audio
•Cable start potentiomètre
INHALT DER SCHACHTEL
•CD PLAYER
•Versorgungskabel
•Audiokabel
•Startkabel für Fader
CONTENUTO DELLA SCATOLA
•CD PLAYER
•CAVO DI ALIMENTAZIONE
•CAVO AUDIO
•CAVO D’INIZIO PER IL

CD PLAYER QUICK SETUP (ENGLISH)
1.Make sure all items listed on the front of this
guide were in the box.
2.READ SAFETY INSTRUCTION BOOKLET
BEFORE USING THE PRODUCT.
3.Study this setup diagram.
4.Place mixer in an appropriate position for
operation.
5.Make sure all devices are turned off and all
faders and gain knobs are set to “zero”
6.Connect all stereo input sources as indicated in
the diagram, your microphone, and
headphones
7.Connect the stereo outputs to power
amplifier(s), tape decks, and/or other audio
sources.
8.Plug all devices into AC power.
9.Switch everything on in the following order.
•audio input sources (i.e. turntables or CD
players)
•mixer
•last, any amplifiers or output devices
10.When turning off, always reverse this operation
by,
•turning off amplifiers
•mixer
•last, any input devices
11. Go to http://www.numark.com
for product
registration.
More information about this product may be
found at http://www.numark.com
FEATURES:
1.PLAY/STUTTER- Starts the music from the
initial cue point.
2.PAUSE- Pauses the music.
3.CUE- Returns and pauses the music at the last
set cue point. The cue point is where the music
will begin when play is pressed. The cue point
is the beginning of a track or can be set when
play is started after the music is paused. For
instance if the music is paused then Play is
pressed, a new cue point is set. You can easily
edit the cue point by turning the wheel during
pause. As you rotate the wheel the music will
sound. By stopping the wheel and pressing
play a new point is set. Alternately pressing
the PLAY button and the CUE button allows the
CD to be played from the same position any
number of times.
Note: Pressing cue 2 times plays music
temporarily from this point until the button is
released.
4.JOG WHEEL-
Cue Function: As explained under “CUE”,
when the music is paused and you rotate the
wheel, music will sound. By pressing play a
new cue point is set.
Search Function: As explained under
“SEARCH BUTTON”, when search is pressed
and you rotate the wheel, the music will rapidly
scan the music to find a cue point.
Pitch Bend Function: allows the user to
temporarily change the speed of the music to
align beats. When the beats of the music of
the CD you wish to match is fast compared to
the tempo of the other music rotate the jog
wheel counter clockwise (to the left). When the
CD is behind rotate the jog wheel clockwise (to
the right). The pitch changes temporarily while
the jog wheel is rotated. The faster you rotate
the wheel the more pitch is changed.
Releasing the wheel results in a return to the
original pitch.

5.LCD DISPLAY- Indicates all the functions, as
they are occurring, with the CD.
6.OPEN/CLOSE- Pressing will open or close the
disc tray on the transport.
7.SGL- To set play mode in single or continuous
play.
8.TIME- Controls display indication of time mode.
9.PROGRAM- Depress this button and the unit will
stop and the program indicator will light.
Select each track to be programmed and press
the PROGRAM button between selections. You
can program up to 30 tracks. Press PLAY to
start the program. To exit and erase program,
either hold the program button down for more
than 2 seconds while the unit is stopped, open
the disc tray, or turn off the power.
10.TRACK SELECT/SEARCH-
a.Rotation – selects tracks
b.Pressing while rotating – selects tracks
+10
c.Pressing once- Puts wheel in search
mode.
11.PITCH- actives the pitch slider and adjusts the
amount of control the pitch slider has on the overall
speed of music. Tapping the pitch will toggle slider
between 8% and 16% pitch ranges. Holding the
pitch for 3 seconds will deactivate the pitch control.
12.BPM- Switches the mode of the display between
showing the BPM and the percentage change in
pitch.
13.-,+ - Works as pitch bend and controls key and
pitch functions.
14.PITCH SLIDER- Controls the overall speed of
the music.
15.PITCH RANGE LED- Indicates current pitch
range of the pitch slider
16.LOOP IN- Used to set stutter and loop in points.
17.LOOP OUT- Used to set loop out points and
release the loop.
18.RELOOP/STUTTER- Used for repeated play
(stutter) from the loop in point, repeating a
previously set, and hot start.
19.RELAY- Used for setting Alternating play start
between attached units.
20.TAP- Tap this button with the beat of the music to
determine the current Beats Per Minute (BPM).
21.CD Illumination Light (unit front) – lights up
the CD drawer and CD when open.
22.CD Drawer (Unit Front) – Place your CDs you
wish to play in here. This unit is designed to
play commercially available CD and properly
burned and finalized CDR. Due to variances on
the specification of certain CD burners and CDs
some discs home made CDs may not play
properly.
23.Power Switch- Turn on and turn off the
machine with this button. The unit should
always be shut down with this button first
before any external power is removed.
Typically, it is recommended that the CD player
is powered on before amplifiers and off after
amplifiers to avoid an audio spike to be sent
through your equipment.
24.IEC Power Plug Connector - Plug your supplied
power cord in here.
25.Voltage Selector - Set this switch to the voltage
for your location.
26.RCA Audio Connectors - Connect your CD
player to your mixer from this line level output.
27.Digital Output - The format is type 2, form 1,
also known as S/PDIF (Sony/Phillips Digital
Interface Format). In order to use the digital
output you should not use variable pitch slider
and the pitch bend buttons. If you adjust the
pitch, other devices may not read the digital
output properly because the sampling rate
changes
28.Relay Connector- If you wish to use the relay
function plug in your 3.5mm stereo control
cables into here and then into your other unit.
The cable must be a stereo style plug for the
units to work properly
29.Remote Start Connector – Use this connector to
plug into your fader start compatible mixer or
remote switch. This function is always active.
To use this connector for fader start, connect
the supplied fader start cable to a fader start
compatible mixer. Every time you move the
crossfader on the mixer over to the side that
the unit is on, it will automatically start playing.
When you move the fader away from that side,
the unit will stop. Moving the fader back to the
unit side will start play again.
Product specificaties
| Merk: | Numark |
| Categorie: | Niet gecategoriseerd |
| Model: | Axis 4 |
Heb je hulp nodig?
Als je hulp nodig hebt met Numark Axis 4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden