Noctua NH-D15 SE-AM4 Handleiding

Bekijk gratis de handleiding van Noctua NH-D15 SE-AM4 (2 pagina’s), behorend tot de categorie Hardwarekoeling. Deze gids werd als nuttig beoordeeld door 20 mensen en kreeg gemiddeld 4.3 sterren uit 7 reviews. Heb je een vraag over Noctua NH-D15 SE-AM4 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Noctua NH-D15 SE-AM4 | Installation Manual

AM4

Required mounting parts:

Dear customer,

Congratulations on choosing the Noctua NH-D15 SE-AM4.

Having received more than 200 awards and recommendations from

international hardware websites and magazines, our flagship model

NH-D15 has become a benchmark for elite-class dual tower coolers.

The SE-AM4 version is a dedicated special edition for AMD’s AM4

platform featuring the latest SecuFirm2™ mounting system for AM4.

Enjoy your NH-D15 SE-AM4!

Yours sincerely,

Roland Mossig, Noctua CEO

This manual will guide you through the installation process of the

SecuFirm2™ mounting system step by step.

Prior to installing the cooler, please consult the compatibility list

on our website (www.noctua.at/compatibility) and verify that the

cooler is fully compatible with your motherboard. Please also make

sure that your PC case offers sufficient clearance for the cooler and

that there are no compatibility issues with any other components

(e.g. tall RAM modules). Double check that the heatsink and fan

clips do not make contact with the VGA card or other PCIe cards.

Noctua cannot be held responsible for any damage or losses caused

by compatibility issues.

Should you encounter any difficulties, please check the FAQs on

our website (www.noctua.at/faqs) and don’t hesitate to contact our

support team at support@noctua.at.

Multilingual versions of this manual are available on our

website: www.noctua.at/manuals

AMD stock backplate

(pre-installed on the motherboard)

4x NM-APS4 plastic spacers4x NM-ALS1 screws

2x NM-AMB4 mounting bars2x NM-AMB5 mounting bars

Attaching the mounting bars

Choose either the short NM-AMB4 or the long NM-AMB5 mounting

bars according to the desired final orientation of the cooler.

Step 2

Removing the stock retention module

First remove the motherboard’s stock CPU cooler retention module

by unscrewing it from the backplate. The SecuFirm2™ mounting

system will install directly to the stock backplate, so please keep

it in place.

Step 1

If your motherboard does not include a stock backplate, please

contact Noctua customer support at [email protected].

Orientation NM-AMB5Orientation NM-AMB4

NM-AMB4

First put the NM-APS4 plastic spacers onto the screw threads of the

backplate, then fix the mounting bars using the four long screws.

NM-AMB5

For the short NM-AMB4 mounting bars, make sure that the curved

sides are pointing inwards. For the long NM-AMB5 mounting bars,

make sure that the curved sides are pointing outwards.

Caution: Gently tighten the screws until they stop, but don’t use

excessive force (max. torque 0.6 Nm).

NM-AMB5 mounting barsNM-AMB4 mounting bars

Please note that on some motherboards, the long NM-AMB5

mounting bars may not fit due to making contact with components

on the motherboard. In such cases, the cooler can be installed with

the short NM-AMB4 mounting bars only.

Applying thermal paste

If there are residual traces of thermal paste or thermal pads on

your CPU, please clean them off first. Then press a small drop

(4-5mm diameter) of the supplied NT-H1 thermal compound onto

the centre of the heatspreader.

Step 3

Caution: Applying too much thermal paste will lower heat conduc-

tivity and cooling performance!

Product specificaties