Noctua NF-A6x15 PWM Handleiding

Bekijk gratis de handleiding van Noctua NF-A6x15 PWM (1 pagina’s), behorend tot de categorie Ventilator. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.2 sterren uit 4 reviews. Heb je een vraag over Noctua NF-A6x15 PWM of wil je andere gebruikers van dit product iets vragen? Stel een vraag

NOCTUA NF-A6x15 PWM

INSTALLATION MANUAL

Scan this code to display

multilingual manuals on

your phone.

Installation

This document includes some instructions for installing,

running and cleaning your NF-A6x15 PWM.

Should you encounter any difficulties, please

check the FAQs on our website (faqs.noctua.at)

and don’t hesitate to contact our support team at

support@noctua.at.

Multilingual versions of this manual are available on our

website: www.noctua.at/manuals

1

Dear customer,

Congratulations on choosing the Noctua NF-A6x15 PWM.

We at Noctua always strive to achieve superior quiet cooling

performance regardless of whether it’s a big 200mm fan or

a small 40mm one. That’s why the NF-A6x15 PWM sports

many of the features and advanced aerodynamic design

measures of our award-winning larger models, making it

perhaps the most thoroughly optimised 60mm fan on the

market.

Each Noctua fan is double-checked for flawless operation

by our quality control team before it leaves the factory and

I’m confident that you will be able to sense some of the

research, attention and care we’ve put into making this

product.

Enjoy your NF-A6x15 PWM!

Yours sincerely,

Roland Mossig, Noctua CEO

Included mounting parts:

NA-YC1

4-pin PWM splitter cable

4x NA-AV2

anti-vibration mounts

NA-RC14

Low-Noise Adaptor (L.N.A.)

NA-EC1

30cm extension cable

If you replace an existing 60mm fan with the NF-A6x15

PWM in devices such as storage or network solutions,

it is usually best to use the screws (or other mounting

mechanism) used for the original fan.

Depending on the application, it may also be possible to

use the supplied mounting screws or silicone anti-vibration

mounts.

For installing the fan using the NA-AV2 mounts, please

first pull the F side through the fan’s mounting holes and

then pull the C side through the mounting holes of the

case:

NF-A6x15 PWM will run at full speed (unless the

motherboard supports voltage based speed control).

If you’re using multiple NF-A6x15 PWM fans, you can use

the supplied y-cable (NA-YC1) to connect several fans to

one PWM fan header. This way, your motherboard will set

all the connected fans to run at the same speed.

The NF-A6x15 PWM features a short 20cm primary cable

in order to help you minimise cable clutter in typical

applications. If you need a longer cable, please add the

supplied 30cm extension (NA-EC1).

The NF-A6x15 PWM comes with a Low-Noise Adaptor

(NA-RC14) that allows you to reduce the fan speed from

3500 to 3050rpm. You can either use the adaptor to set

the fan to a fixed speed of 3050rpm (if speed control is

deactivated) or to cap the maximum speed to 3050rpm

during PWM speed control.

Cleaning and maintenance

3

In order to maintain maximum performance, please clean

your fans regularly using a duster, slightly moist tissue or

canned air. Please be careful not to use too much force

in order to prevent any damage to the fan. Please don’t

use a vacuum cleaner as this may apply excessive force

to the fan.

In order to ensure flawless operation over many years of

usage, the NF-A6x15 PWM’s premium grade SSO2 bearing

is fully sealed to prevent the entering of fine dust particles.

Please note that the fan is not designed to be taken apart

by the user. Removing the impeller from the frame will

break the sealing of the bearing and results in a loss of

warranty.

4x fan screws

If the long ends of the mounts are in the way, you can use

scissors to cut them after installation. Note that this will

then make them difficult to reinstall in the future.

Warranty, support and FAQs

!

Even with high-grade products and strict quality control,

the possibility of defects cannot be eliminated entirely.

Therefore, we aim at providing the highest possible level of

reliability and convenience by offering a warranty period of

6 years and direct, fast and straightforward RMA service.

Should you encounter any problems with your

NF-A6x15 PWM, please don’t hesitate to contact our

support team (support@noctua.at).

Please also consult the FAQ section on our website:

faqs.noctua.at

F = fan side C = case side

Connection

2

The NF-A6x15 PWM comes with a 4-pin PWM fan connector

for fully automatic speed control via your motherboard’s

4-pin PWM fan headers. Please note that the fan can also

be connected to your motherboard’s 3-pin fan headers

though. When connected to 3-pin fan headers, the

Product specificaties