Lasko WhisperForce HVDC364 Handleiding
Pagina's 16 Ventilator
Bekijk de handleiding van Lasko WhisperForce HVDC364 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
USER MANUAL
Lasko Products is committed to product integrity, providing innovation, value and quality with
a brand consumers can trust. Lasko values its intellectual property and respects the intellectual
property of others.
35” High Velocity
Tower Fan
Models: HVDC364/
HVT350/UDC635
STRATUS
Model HVDC364 Shown
NEW 09/252HVDC364_HVT350_UDC635ES
Do not use this Fan to ventilate areas where ammable liquids or vapors are used,
stored or are present, including paints, gasoline, varnishes, oor renishing products or
solvents. ALWAYS read and follow all warnings and instructions on the containers for
these products!
Always be sure the plug ts tightly into the outlet. When plugs t loosely into outlets,
they may slip partially out of the outlet and create a poor connection. This may cause
outlets to overheat and create a potential re hazard. Outlets in this condition should be
replaced by a qualied electrician.
Always unplug the power cord when servicing, cleaning or moving the Fan. Do not use
the ON/OFF switch as the sole means of disconnecting power. Never leave children
unattended when the Fan is on or plugged in. Always turn off and unplug the fan when
not in use.
Be certain that the power source for the Fan is 120V AC. Do not plug the Fan into 240V
or other power source.
The Blue Plug™ on your Lasko Fan is a safety feature. It contains a non-replaceable
safety device (fuse) that should not be removed or tampered with. To reduce the risk
of re, electric shock and personal injury, do not attempt to remove, replace, repair or
tamper with the originally supplied plug. If the Fan has stopped functioning, it may be
due to the safety device incorporated in this plug.
This fan has a polarized plug (one blade is wider than the other). This plug is designed
to t into the outlet only one way. Match the wide blade to wide slot in outlet and fully
insert. Do not attempt to bypass or defeat this safety feature. If the plug does not t in
the outlet, consult a qualied electrician. The outlet may need to be replaced.
This fan shall not be modied by users, such as by adding supplemental lters to fans
not intended to be used for air cleaning purposes.
WARNING: To reduce the risk of re, electric shock, or injury to persons, do not use
replacement parts that have not been recommended by the manufacturer (e.g. parts
made at home using a 3D printer).
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, these instructions and warnings
should always be followed to reduce the risk of re, electrical
shock and injury to persons:
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL
INJURY, ALWAYS FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS
AND WARNINGS:
READ ALL INSTRUCTIONS BEFORE USING THIS FAN.
WARNING:
NEW 09/253HVDC364_HVT350_UDC635ES
• Avoid the use of extension cords, power strips, power taps, outlet style air fresheners or other
cord connected device, as these devices may overheat and cause a re hazard.
• Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized
service facility for examination and/or repair.
• Do not route power cord under rugs, carpets, runners or furniture. This may damage the cord or
cause it to overheat creating a re hazard.
• Always place the fan on a stable, at, level surface while in operation to prevent the fan
from overturning.
• Never insert or allow ngers or objects to enter grille openings while fan is in operation or injury
and/or damage to the fan may occur.
• Do not block, cover or obstruct air ow to or from the fan while in operation.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings.
• Do not route cord under furniture or appliances. Arrange cord away from trafc area and
where it will not be tripped over.
• Never use a single extension cord to operate more than one fan or other electrical device.
• Do not use this fan if it has been damaged or is not functioning properly.
• Remote controls for other appliances or electronic equipment can sometimes interfere with the
operation of this fan. If this occurs, move the fan to another location.
• Keep fan remote control unit away from chairs and your bed where it may be sat or laid upon and
inadvertently turn on the fan.
• This fan does not meet the requirements of nec article 547-7 (2008). This fan is not suitable for
use in agricultural facilities including areas where livestock, poultry or other animals are conned.
Please refer to national electric code (nec) article 547-7 (2008), or applicable state or local codes
or standards relating to electrical requirements for agricultural buildings.
• This fan does not meet the requirements of nec article 500 (2008). This fan is not suitable for use
in hazardous locations. Please refer to national electric code (nec) article 500 or applicable state
or local codes or standards relating to electrical requirements for hazardous locations.
SAVE THESE INSTRUCTIONS
CAUTION:
REMOTE CONTROL:
• Install two “AAA” batteries (not included).
• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
• Do not dispose of batteries in re. Batteries may explode or leak.
• Always purchase the correct size and grade of battery most suitable
for the intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior
to battery installation.
• Ensure the batteries are installed correctly with regards to polarity (+ and -).
• Remove batteries from equipment that is not to be used for an
extended period of time.
• Remove used batteries promptly.
Product specificaties
| Merk: | Lasko |
| Categorie: | Ventilator |
| Model: | WhisperForce HVDC364 |
Heb je hulp nodig?
Als je hulp nodig hebt met Lasko WhisperForce HVDC364 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden