Nitecore EA21 Handleiding
Lees hieronder de đź“– handleiding in het Nederlandse voor Nitecore EA21 (1 pagina's) in de categorie Zaklampen. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/1
EA21
Features
· Utilizes CREE XP-G2 (R5) LED
· Maximum output of 360 lumens
· Integrated “Precision Digital Optics Technology” provides extreme reflector performance
· Boasts a peak beam intensity of 7000 cd and a throw distance of up to 167 meters
· Dual-switch design ensures unprecedented ease of use
· Secondary red LED provides constant / flashing illumination
· Indicates battery voltage with a red flashing LED (accurate to 0.1V)
· High efficiency constant current circuit enables maximum runtime of up to 30 hours
· Direct access to ultra-low and turbo output
· Reverse polarity protection prevents damage from incorrectly inserted batteries
· Detachable two-way anti-rolling clip
· Toughened ultra-clear mineral glass with anti-scratch coating
· Constructed from aero grade aluminum alloy
· HAIII military grade hard-anodized
· Waterproof in accordance with IPX-8 (2 meters submersible)
· Impact resistant to 1.5 meters
· Tail stand capability
Dimensions
Length: 5.57” (141.5mm)
Head diameter: 1” (25.4mm)
Tail diameter: 0.83” (21.2mm)
Weight: 2.36oz (67 gram) (without battery)
Direct Access to Ultra-low/Turbo Output
With the light switched off, press and hold the ON/OFF button for more than one second to
access ultra-low mode (1 lumen).
With the light switched off, press and hold the MODE button for more than one second to access
turbo mode (360 lumens).
NOTE: When in turbo mode, the EA21 will adjust output luminance automatically within 3 minutes
of use to prevent overheating and extend battery longevity.
Red Light / Signal Light Mode
With the light switched off, press the MODE button to enter red light mode. In this mode, the
secondary red LED will illuminate steadily.
When in red light mode, press and hold the MODE button for more than one second to enter
signal light mode. In this mode, the secondary red LED will flash to serve as a signal light.
Simply press any button to exit the red light /signal light mode.
Special modes (Strobe/Location/SOS)
With the light switched on, press and hold the MODE button for more than one second to enter
strobe mode. When in strobe mode, press and hold the MODE button for more than one second
again to cycle through Location Beacon, SOS and Strobe modes. To exit, simply press the MODE
button to resume the brightness level last used, or press the ON/OFF button to switch the
light off.
Strobe Ready
With the light switched off, press the MODE button twice in quick succession to enter Strobe
mode. To exit, simply press any button.
Lockout / Unlock
With the light switched on, press and hold the ON/OFF button and the MODE button
simultaneously for over one second to switch the light off and enter lockout mode. In lockout mode,
the EA21 conserves battery power for over 300 days; the two buttons on EA21 will not work, thus
preventing accidental activation of the light. To exit lockout mode, simply press and hold the
ON/OFF button and the MODE button simultaneously for over one second again.
NOTE:
1. Upon entering lockout mode, the secondary red LED will flash to indicate battery voltage. Please
refer to the “Power Tips” section for more details.
2. When the EA21 is kept in a backpack or left unused for extended periods, Nitecore recommends
the tailcap is loosened or batteries are removed to cut off the power entirely, thus preventing
accidental activation of the flashlight or battery leakage.
Power Tips
After battery installation or lockout mode activation, the secondary red LED will flash to indicate
battery voltage (accurate to 0.1V). For example, when battery voltage is at 2.4V, the red LED will
flash 2 times, followed by a one second pause and another 4 flashes. Different voltages represent
the corresponding remaining battery power levels:
Output & Runtime
NOTICE:
The stated data has been measured in accordance with the international flashlight testing
standards ANSI/NEMA FL1, using two high quality AA rechargeable batteries (1.2V, 2500mAH)
under laboratory conditions. The data may vary in real-world use due to different battery usage or
environmental conditions.
Operating Instructions
Battery Installation
Insert two AA batteries as illustrated
NOTE: After loading the batteries, the secondary
red LED will flash to indicate battery voltage.
Please refer to the “Power Tips” section of this
manual for details.
WARNING:
Ensure batteries are inserted with the positive (+)
end pointing towards the head. The EA21 will not
be operational with incorrectly inserted batteries.
Accessories
Quality holster, clip, lanyard,
spare O-ring
Battery Options
2.7V2.1V 2.4V 2.5V
Low Power Full Power
TURBO HIGH MID LOW
LUMENS
220
LUMENS
360
LUMENS
110
LUMENS
35
2
h min15
5
h min45
1
h min15
11
h
LOWER
LUMEN
1
30
h
167m
(Beam Distance)
7000cd
(Peak Beam Intensity)
IPX-8, 2m
(Waterproof AND Submersible)
1.5m
(Impact Resistant)
®
The All-Round Flashlight Expert
Thanks for purchasing NITECORE!
User Manual
On / Off Operation
To switch ON: Press the ON/OFF button once.
To switch OFF: Press the ON/OFF button once again to switch the light off and enter standby mode
Standby Mode
With the light switched on, press and hold the ON/OFF button for more than one second to switch the
light off and activate the secondary red LED to flash once every three seconds, thus helping the user
locate the EA21 in dark conditions. With the red LED on, the EA21 will operate for up to 8 consecutive
days. With the red LED off, the EA21 can remain on standby for more than 300 days.
Brightness Levels
With the EA21 switched on, press the MODE button repeatedly to cycle through the following
brightness levels: ultra-low, low, medium, high and turbo. Once a brightness level is selected it will
be saved and resumed when the EA21 is reactivated.
Changing / Charging Batteries
Batteries should be replaced or recharged when output appears to be dim or the flashlight
becomes unresponsive.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of
silicon-based lubricant.
Warranty Service
All NITECORE® products are warranted for quality. Any defective / malfunctioning NITECORE®
product can be repaired free of charge for a period of 60 months (5 years) from the date of
purchase. Beyond 60 months (5 years), a limited warranty applies, covering the cost of labor and
maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please contact a local
NITECORE® distributor or send an email to service@nitecore.com
※All images, text and statements specified herein this user manual are for reference purpose only.
Should any discrepancy occurs between this manual and information specified on
www.nitecore.com, information on our official website shall prevail. Sysmax Industry Co., Ltd.
reserves the rights to interpret and amend the content of this document at any time without prior
notice.
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
TYPE Nominal voltage Compatible
Primary AA battery AA 1.5V Y (Recommended)
Rechargeable AA battery AA 1.2V Y (Recommended)
Primary AA Li-ion battery L91 1.5V Y (Recommended)
Primary LiFePO4 battery 14500 3.2V N (Banned)
Rechargeable Li-ion battery 14500 3.7V N (Banned)
20150916
Please find us on facebook:
NITECORE Flashlights
Product specificaties
| Merk: | Nitecore |
| Categorie: | Zaklampen |
| Model: | EA21 |
Heb je hulp nodig?
Als je hulp nodig hebt met Nitecore EA21 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zaklampen Nitecore
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
Handleiding Zaklampen
- Zaklampen Alecto
- Zaklampen Ansmann
- Zaklampen LED Lenser
- Zaklampen Makita
- Zaklampen Silva
- Zaklampen Worx
- Zaklampen Crivit
- Zaklampen Black And Decker
- Zaklampen Anslut
- Zaklampen Fenix
- Zaklampen Klarus
- Zaklampen Maglite
- Zaklampen Masai
- Zaklampen Olight
- Zaklampen Pelican
- Zaklampen Petzl
- Zaklampen Streamlight
Nieuwste handleidingen voor Zaklampen
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022