Neumann LH 32 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Neumann LH 32 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
LH 32 Mounting manual
Important safety and mounting
instructions
Read and follow the safety and mounting instructions, keep these
instructions easily accessible and always include them when pas-
sing the LH 32 on to third parties.
Also read and follow the installation instructions contained in the
operating manual of the studio monitor to be mounted.
-When mounting, follow the local, national and international regu
lations and standards.
Intended use
The LH 32 is a holder for fastening a studio monitor to a wall and
providing optimal orientation. The LH 32 is only suitable for 2-way
studio monitors and must only be used indoors in clean, dry rooms
such as studios.
Additional mounting elements are needed to properly mount the
LH32 and an attached studio monitor to the wall, which are not inclu-
ded with delivery.
The LH 32 must not be used for other purposes or in other environ-
ments. In case of any damage or any deviation from the safety and
mounting instructions, immediately dismount the studio monitor and
the LH32.
Required quali cations
Only skilled personnel may attach the LH32 to the studio monitor and
mount it on the wall. Due to his/her technical training, know-how and
experience as well as knowledge of relevant provisions, regulations
and standards, the specialist must be able to assess assigned tasks,
recognize potential hazards and ensure appropriate safety measures.
Safety instructions for mounting
Mount only one LH 32 to one studio monitor, as described in these
assembly instructions.
If the studio monitor is heavy, a second person to help carry find
out the work; during the work, place the studio monitor on a , flat
stable surface that can support its weight.
Place something soft underneath the studio monitor so that you do
not scratch its surface while performing the work.
Always use the enclosed original accessories.
The wall must be able to support the weight of the studio monitor
and all accessories used, such that no parts will fall even if some-
one pulls hard on the power or audio cables. When calculating the
weight, also take into account the additional leverage.
When mounting the 32 on the wall, use fastening elements (not LH
included with delivery) that are y dimensioned to ensure sucientl
that the entire weight is held securely.
Mount the LH 32 and the attached studio monitor to a , non-slip flat
wall.
Before starting work, prepare the adapter plate and fasten it to the
wall. Then attach the two braces for horizontal and vertical inclina-
tion adjustment to the adapter plate and hook the studio monitor
into the 32. Then adjust the studio monitor to the desired incLH -
lination.
Tighten all screws by hand. Once you have mounting and finished
aligning the studio monitor, ensure that all screws are y tighfirml -
tened.
Take additional measures to ensure that the LH32 and the attached
studio monitor cannot fall. Use safety wires that are y sucientl
dimensioned for the weight to be secured.
Do not use the LH 32 in environments that are exposed to external
vibrations.
Every 3 months, check that all screws are properly tightened and
that the 32, the studio monitor and the wall on which the 32 LH LH
is mounted are in the proper condition.
Replace the safety wire once it has already prevented the studio
monitor from falling once.
Delivery includes
A: 1 x brace for vertical inclination
B: 1 x brace for horizontal inclination
C: 1 x adapter plate for wall installation
D: 1 x T-nut, 2 x M6, 60mm
E: 2 x metal washers, M6
F: 1 x O-ring
G: 6 x Allen screws, M6x12
H: 2 x Allen screws, M8x12
I: 1 x Allen key, 4mm
J: 1 x Allen key, 5mm
Specications
Weight approx. 0.8kg
Dimensions when assembled 116x98x98mm (H x W x D)
Max. load 10kg
Warranty
For the current terms and conditions of the warranty, please visit
www.neumann.com.
georg neumann gmbh · Leip ziger S tr . 112 · 10117 ber Lin · germany 04/17 · 544944/a04
te L +49 (0)30 / 41 77 24-0 · fax -50 · headoffice@neumann.c om · www.neumann.c om
EN
LH 32
Mounting manual
1
2
A
F
F
G
G
G
I
D
D
H
B
C
C
I
J
E
3–4 x
3–4 x
LH 32
Mounting manual
3
4
GI
I
E
EG
A
B
2
1
3
> 40°
0° – 25°
20° – 40°


Product specificaties

Merk: Neumann
Categorie: Niet gecategoriseerd
Model: LH 32

Heb je hulp nodig?

Als je hulp nodig hebt met Neumann LH 32 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Neumann

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd