Netgear ProSafe AXM764 Handleiding

Bekijk gratis de handleiding van Netgear ProSafe AXM764 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 212 mensen en kreeg gemiddeld 4.3 sterren uit 9 reviews. Heb je een vraag over Netgear ProSafe AXM764 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Installation

The 10 Gigabit BASE-LR LITE SFP+ module transmits at 10 G bps over

single mode fiber (SMF) for up to 2 Km.

Install the Module

NETGEAR switches automatically detect the AXM764 module. The module

can be inserted or removed while the switch is powered on.

¾To install a module:

1. Insert the module into one of the available SFP+ module slots, pressing

firmly to seat the module.

2. Make sure that the module latch is in the closed position.

3. Connect a single-mode LC to LC duplex cable to the module.

Remove the Module

You do not need to power o the switch before removing the module.

¾To remove a module:

1. Disconnect any cables from the module.

2. Pull down on the module latch.

3. Pull the module out of the module slot.

Specifications

Specifications Description

Wavelength 1310nm

Dimensions (H x W x D).47 in. x .57 in. x 2.22 in. (11.85 mm x

14.55 mm x 56.50 mm)

Weight0.04 lb (20 g)

Operating temperature23 –158ºF (-5 – 85ºC)

Storage temperature-40 – 185ºF (-40 –85ºC)

Operative relative humidity85% at 25ºC

Operating DistanceUp to 2Km on legacy 9/125μm single

mode fiber cables.

Connectors LC

Max. power consumption1.1W

MTBF2310,000 hours (264 years)

Safety CertificationFDA/CDRH, IEC-60825

Compliance RoHS

ProSAFE 10 Gigabit BASE-LR LITE SFP+

Single Mode Module

AX764

Product specificaties