Monitor Audio CW10 Handleiding

Monitor Audio Subwoofer CW10

Lees hieronder de 📖 handleiding in het Nederlandse voor Monitor Audio CW10 (19 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/19
O w n e r s M a n u a l
Contents
Introduction 1
Unpacking 1
SubConnect 1
AmpPanel 2
Positioning/InitialSetUp 4
SetUp 4
RS232 5
RS232WiringConguration 5
RS232CommunicationSet-UpParameters 5
CommandProtocol 5
CommandList 5
EQProles 6
InfraRedRemoteCodes 6
UpdateFirmwareonSub 6
BootloaderMode 6
AutomaticUpdate. 7
ManualUpdate 7
FactoryReset 8
Guarantee 8
Specications 9
TroubleShooting 10
OwnerInformation 10
ENGLISH
Introduction
Thank you for your purchase of the CW8 or CW10, which have been designed and constructed using quality systems and materials
to provide years of enjoyment, reliability and pride of ownership.
The subwoofers both use our own, proprietary in-house developed DSP and EQ proles to provide you with the all encompassing
Monitor Audio experience. With technology used in the agship range, the Platinum II Series, these subwoofers will ll the room
with ground shaking bass.
Please read through this manual to familiarise yourself with any safety advice and how to set up your subwoofer to achieve the
very best listening experience.
Please retain this manual for future reference.
Unpacking
Care must be taken at all times when handling the subwoofer due to the weight and the construction of the
product. We recommend a two-person lift wherever appropriate.
The mains power cord(s) and 12 volt trigger cable are contained separately in the packaging and should be removed prior to
unpacking the product.
To remove the subwoofer from its carton place some protective material on the oor and having removed any loose items (mains
lead(s) and 12 volt trigger lead) from the top of the packaging, carefully invert the carton. Also refer to the icons printed on the
carton. Gradually pull the carton upwards to expose the subwoofer, which will be presented with its base uppermost. Remove
xing tape from bag and expose the base/cabinet.
SubConnect
The Monitor Audio SubConnect application is a Windows only application that enables the end user to fully customise and control the
advanced features of the subwoofer. The application is downloadable from the Monitor Audio website (www.monitoraudio.co.uk). Here
you will nd full instructions on how to install and use it.
The application will be required should armware update be needed for the CW8 or CW10.
monitoraudio.com 1
CUSTOM SUBWOOFER2
40HzMIN MAX 120Hz
Intertek
3100294
11
6
121314
1
2
3
4
5
7
7a
8
9
10
1. Volume Control
This controls the master volume of the subwoofer. Further ne trimming can be achieved via the SubConnect application.
2. 12v Trigger - Centre Pin = +12v
For external power control from AV amplier/ receiver to the subwoofer (cable supplied), and to toggle between dierent presets
depending on how it is set up in the SubConnect application. The default setting is to control the power.
This 12 volt signal comes from the source amplier and supplies the subwoofer with a signal to perform a predetermined action.
This is either to turn it on or to switch presets. When used to turn the subwoofer on and o, it is a very energy ecient method
of power control. The auto o timer and signal sense features will not operate when the 12v trigger is connected.
3. RS232 Control
For use with home automation systems and uses a conventional RJ45 connector, refer to page 5 for the wiring conguration
and set up protocol.
4. USB-B Socket
This is provided to update the rmware and settings of the subwoofer in conjunction with the SubConnect application. The
application must be downloaded from the Monitor Audio website. A USB cable is not included, please use the appropriate
USB A - USB B cable.
AmpPanel

Product specificaties

Merk: Monitor Audio
Categorie: Subwoofer
Model: CW10

Heb je hulp nodig?

Als je hulp nodig hebt met Monitor Audio CW10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Subwoofer Monitor Audio

Monitor Audio

Monitor Audio Radius 390 Handleiding

14 November 2023
Monitor Audio

Monitor Audio Mass W200 Handleiding

14 November 2023
Monitor Audio

Monitor Audio Silver W-12 Handleiding

14 November 2023
Monitor Audio

Monitor Audio Apex AW-12 Handleiding

14 November 2023
Monitor Audio

Monitor Audio CW8 Handleiding

14 November 2023
Monitor Audio

Monitor Audio CW10 Handleiding

14 November 2023
Monitor Audio

Monitor Audio R370HD Handleiding

14 November 2023
Monitor Audio

Monitor Audio Radius 380 Handleiding

13 November 2023
Monitor Audio

Monitor Audio 360hd Handleiding

29 September 2023

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer

RCF

RCF S 19 Handleiding

10 April 2024
RCF

RCF S 29 Handleiding

10 April 2024
KEF

KEF KC92 Handleiding

6 April 2024
Klipsch

Klipsch Reference Premiere RP-1200SW Handleiding

3 April 2024
Klipsch

Klipsch Reference Premiere RP-1000SW Handleiding

3 April 2024
Velodyne

Velodyne Deep Waves 10 Handleiding

27 Maart 2024
Klipsch

Klipsch PRO-1000SW Handleiding

27 Maart 2024
Totem

Totem KIN Sub Handleiding

27 Maart 2024
Velodyne

Velodyne Deep Waves 12 Handleiding

27 Maart 2024
Kanto

Kanto SUB8V Handleiding

27 Maart 2024