Monacor ELAX-2036DF Handleiding

Monacor Bewakingscamera ELAX-2036DF

Lees hieronder de 📖 handleiding in het Nederlandse voor Monacor ELAX-2036DF (4 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

1080P HD CCTV Camera

AHD CVBS HDCVI HDTVI

Specifications

Connection diagram

1080P DVR

video out

12V DC

mode swich

1 2

HD TVI HD CVI Analog AHD

Thank you for purchasing our product. If there are any questions,

please read this user manual at first, and do not hesitate to contact us.

Note:

This manual may contain some incorrect places, even though it was

published with our carefully proofreading. The news updates will be

added to the next release without notice. Your valuable advice is really

appreciated.

Cautions:

Make sure the power supply is matched with the camera power

input to avoid damage. Neither of the power adapter nor video

cable should not be beyond the longest transportation limit.

Model

Image Sensor

Chipset

Effective Pixels

Lowest illumination

Electronic Shutter

Video System

Video Frame Rate

Video Output

Video Switch

Smart IR Control

Day/Night

WDR

OSD Menu

Other Function

Power Supply

Power Consumption

Working Environment

IR LED

IR Distance

Lens

Transmission Distance

1080P 4-in-1 HD Camera

1/2.7" 2.1 Mega pixels CMOS

AR0230+FH8536

1928(H)×1088 (V)

0.02Lux@ F1.2,AGC ON , 0 Lux with IR（）

1/50s~1/60,000s

PAL/NTSC

25/30fps@1920×1080P

1 channel, HDCVI / HDTVI/AHD/CVBS optional

2 bit switch

Support

Auto(ICR) / Color / B/W

D-WDR

Support, coaxial cable control via DVR directly (UTC)

AWB, AGC, BLC

DC12V±10%

< 5W

-30°C~+60°C / Less than 95%RH

24/30/36/48/72 pcs selectable

10/15/20/30/50/80 meters selectable

3.6/6/8/12/16/25 mm selectable

Over 300m via 75-3 coaxial cable

Camera

General

4-in-1

1.Image black/white, roll over

1) check the camera rear mode switch cable, adjust it and

make sure the video output is matched for your DVR.

2) go to the camera menu and change the PAL/NTSC mode.

2.Video signal shows horizontal ribbon disturbed area

1) check the power supply cable , it should not be too long,

or change a high quality power adapter to replace.

2) Make sure the DVR BNC port connected stable and the

DVR housing GND grounded.

3.Camera keep white/black , IR led not working or keep on,

glass cover broken, etc.

1) Call the franchiser to repair. Please do not open or try

repairing it without permission.

power adapter

coaxial cable

OSD Menu Control

Functions brief OSD Menu Control

HD CMOS sensor

Within high sensitivity CMOS image sensor, 1080P video

output , very low illumination Prefect image quality emerge

both on day and night environment

4-in-1 Multiply Video modes output

Support 4 HD signals switch output, AHD/HDCVI/HDTVI/

CVBS, easy to use switch cable

OSD menu control up the coaxial cable(UTC)

Camera parameters can be setup via built-in menu. All the

configuration can be changed by back-end DVR directly

up the coax. No need press the cable button

Over 300 meters long distance video signal transportation

Smart IR control, AGC, D-WDR, DNR

Wide range voltage adaptation, Lightning protection

Strong and pretty housing, installations angles can be

adjusted

This series HD camera can support OSD menu coaxial control

by reusing the video cable. It means user can configure,

without menu button, the camera parameters via DVR directly.

( the DVR also should support UTC ) It’s immensely

convenient for site adjustment.

How to enter to the camera menu ?

In general, the DVR must have the coaxial control feature. Go

to the PTZ control window and click the “+ iris -” to call out the

camera menu.

The menu contents is listed as below:

AE: auto image enhancement

WB: white and black balance mode

DAY-NIGHT: day and night switch mode

VIDEO SETTING: video basic parameters, PAL/NTSC, WDR,

DNR adjustment

LANGUAGE: menu language select

RESET: reload factory default

SAVE-EXIT: save all settings and exit menu.

ATW: auto tracking white balance -- default mode

Color: keep color

WB: keep white and black mode

Smart: auto change to color and WB

DNR: digital noise reduce -- reduce the image noise points in

dark environment

WDR: wide dynamic range -- pick up a balance image when

working in back-light environment

Please install this device in appropriate temperature,

-30 - 60 or -22 - 140 , keep away from ℃ ℃ ℉ ℉

corrosive gas and liquid.

Don’t put the camera direct to the sunlight, it is

recommended installing it under a sun shade.

Caution :

Product specificaties

Merk:	Monacor
Categorie:	Bewakingscamera
Model:	ELAX-2036DF
Kleur van het product:	Wit
Gewicht:	265 g
Hoogte:	80 mm
Soort:	CCTV-bewakingscamera
Gebruikershandleiding:	Ja
Internationale veiligheidscode (IP):	IP65
Bluetooth:	Nee
Vormfactor:	Dome
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Montagewijze:	Plafond
Ondersteunde video-modi:	1080p
Maximum resolutie:	1920 x 1080 Pixels
Totaal aantal megapixels:	2 MP
Diameter:	94 mm
Type stroombron:	DC
Stroomuitvoer (volt):	12
Stroomuitvoer (ampère):	0.4 A
Minimale belichting:	0.02 Lux
Field of view (FOV) hoek:	80 °
Aantal cameras:	1
Ingebouwde HDD:	Nee
Nachtvisie:	Ja
LED-type:	IR
Vaste focale lengte:	3.6 mm
Formaat analoog signaal:	NTSC, PAL
Omvang optische sensor:	1/2.9 "
Type beeldsensor:	CMOS
Camera sluitertijd:	1/50 s
Type camerasluiter:	Elektronisch
Maximaal 30 frames per seconde:	30 fps
Dag/nacht modus:	Ja
Aantal lenzen:	1
Controle camerapanning:	Nee
Kantelfunctie camera:	Nee
BNC output ports:	1
Aantal sensoren:	1
Weerbestendig:	Ja
Nachtkijker afstand:	20 m
Aantal verlichtingen LEDS:	12
Achtergrondverlichting compensatie:	Ja
Wide Dynamic Range (WDR):	Ja
Wifi:	Nee
Stroomverbruik (typisch):	5 W
Bedrijfstemperatuur (T-T):	-10 - 50 °C
Aanpassing sluitertijd:	Handmatig
Digital Wide Dynamic Range (DWDR):	Ja
Vaste focus:	Ja