Monacor ELIP-2036DF Handleiding

Bekijk gratis de handleiding van Monacor ELIP-2036DF (14 pagina’s), behorend tot de categorie Bewakingscamera. Deze gids werd als nuttig beoordeeld door 87 mensen en kreeg gemiddeld 4.1 sterren uit 2 reviews. Heb je een vraag over Monacor ELIP-2036DF of wil je andere gebruikers van dit product iets vragen? Stel een vraag

2134

HD IP CAMERA

Quick Start Guide

Note:

123

PoE Switch

9 Port Fast Ethernet Switch With 8 Port PoE

Power Adapter

POE Ethernet Switch

RJ-45

RJ-45

RJ-45

RJ-45

HD IP Camera (PoE)

HD IP Camera (PoE)

To PoE Switch LAN port

DC 12V

DC 12V

HD IP Camera

(without PoE)

HD IP Camera

(without PoE)

To Switch or Router LAN port

To Switch or Router LAN port

To router LAN port

Router

HDMI or VGA output

HDMI or VGA output

RJ-45 To router LAN port

To router LAN port

PoE NVR

To NVR PoE port

Note:

This manual may contain some incorrect places, even though it was published with our carefully proofreading.

The news updates will be added to the next release without notice. Your valuable advice is really appreciated.

V 4.0

1. The camera should be connected to an OPTIONAL 12 volt power supply if you do not use PoE (Power

over Ethernet).

2. A Windows computer is more convenient to setup and troubleshooting.

Figure 1: Working With POE Switch

Figure 2: Working With POE NVR

Modifying the camera’s IP address

Note ：you can also find out the LAN configuration via Windows GUI

Now you can get all the

local network information.

IPv4 Address: 192.168.1.?

Subnet Mask: 255.255.255.0

Default gateway: 192.168.1.1

DNS Servers: 192.168.1.1

Default: IP address: 192.168.0.123 , Username: admin, Password: 123456

( We strongly recommend modifying the default password for your security).

Each IP camera has the same default IP address after leaving the factory. In order to

guarantee network connectivity and access the live video, it is essential to change the

camera’s IP address to unique via computer before using. You can install the device

search tool or UC client from the CD to quickly configure the IP camera.

Before modifying the IP address you’d better confirm the IP network planning and avoid

IP address conflict.

Steps on Local Area Windows 10 PC : Search Windows -> cmd -> ipconfig /all

Right-click on the Network icon and select open Network and Sharing Center.

If the camera is installed to work with the local switch or router directly, the camera

IP range should be 192.168.1.x (x=2-254). To void IP conflict, you should test and

select an unoccupied IP like this:

Command Prompt ping test

Only when reply unreachable

that means the IP address is no

conflict and available, otherwise

when you see time reply do not

use this IP address.

Using Device Search Tool

There are three methods to

modify the camera IP configuration,

Search tool,UC Client software

and Internet Explorer.

2

Modifying the camera’s IP address

a. Click Start Search and all your cameras in

the LAN will be listed. Modify IP address to suit

the LAN’s IP scheme. There are two modifying

methods available: 1) Right click on the desired

camera and choose “Modify IP address”. 2) Click

the ALL check-box then click “IP Batch Setting”.

Reset Password ->Restore default settings;

Video full-screen -> double-click video;

Firmware upgrade -> Select the check-box, click Browse then click File Upgrade.

b. You can also enable the camera DHCP function if

there is a DHCP server available in the LAN.

Most router has DHCP server built-in.

(IP address in DHCP setting may change after

device restart. We do not recommend leaving the IP camera on DHCP).

Tips:

5

6

4

Working with Internet Explorer

To access the camera’s web interface, type in the IP camera’s IP address in Internet

Explorer’s URL bar to gain access to the login page. Please modify IP address to the

same subnet if login page can not load.

(Default user name: admin, Password: 123456)

Firefox ESR and IE are supported.

From the login page, select your familiar language, then log in with the username

and password.

4

Using the UC client software

(Default user name: admin, Password: 123456)

1. Go to the Devices Config and click Start search, all the camera in the LAN

will be listed. Highlighting one of the camera will populate the filed above.

Change the parameter listed in the field and click on “Modify IP” to modify the

camera’s IP address. Please modify the default IP address to match your LAN’s

IP scheme. Note: Be careful when setting up IP addresses to not have

duplicated IP as other devices in LAN.

2. After changing all the IP cameras’ IP address, you can search again and add

them all to the UC client. Once the cameras are added, go to the tab Video View

and drag the camera into the split windows to start previewing the cameras.

QR code for Danale APP

Connecting the camera to system

ELIP-2036BFELIP-2036DF

ELIP-2037PIR ELIP-2550BVM

ELIP-2812BV ELIP-2812BWDR

ELIP-2812DV ELIP-2812DVM

Product specificaties