Milwaukee M18 2657-22 Handleiding
Milwaukee
Schroefmachine
M18 2657-22
Bekijk gratis de handleiding van Milwaukee M18 2657-22 (16 pagina’s), behorend tot de categorie Schroefmachine. Deze gids werd als nuttig beoordeeld door 71 mensen en kreeg gemiddeld 4.5 sterren uit 36 reviews. Heb je een vraag over Milwaukee M18 2657-22 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/16
Cat. No. / No de cat.
2656-20, 2657-20, 2658-20, 2659-20
M18™ 1/4" HEX IMPACT DRIVER, 1/4" HEX 2-SPEED IMPACT
DRIVER, 3/8" IMPACT WRENCH & 1/2" IMPACT WRENCH
TOURNEVIS À PERCUSSION HEXAGONAL SANS FIL DE 6 mm
(1/4") M18™, TOURNEVIS À PERCUSSION HEXAGONAL SANS FIL
À 2 VITESSES DE 6 mm (1/4") M18™, CLÉ À CHOCS COMPACTE
SANS FIL DE 3/8" M18™, CLÉ À CHOCS COMPACTE SANS FIL
DE 1/2" M18™
DESTORNILLADOR DE IMPACTO HEXAGONAL INALÁMBRICO
M18™ DE 6 mm (1/4"), DESTORNILLADOR DE IMPACTO HEXAGO-
NAL INALÁMBRICO M18™ DE 6 mm (1/4") DE 2 VELOCIDADES,
LLAVE DE IMPACTO COMPACTA INALÁMBRICA M18™ DE 3/8",
LLAVE DE IMPACTO COMPACTA INALÁMBRICA M18™ DE 1/2"
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
3
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specied in the instructions.
Charging improperly or at temperatures outside the
specied range may damage the battery and increase
the risk of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
IMPACT DRIVER/IMPACT WRENCH
• Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
“live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.
• Wear ear protectors when impact drilling. Expo-
sure to noise can cause hearing loss.
• Use only sockets and other accessories speci-
cally designed for use on impact wrenches and
drivers. Other sockets and accessories might shatter
or break causing injury.
•
WARNING
To reduce the risk of injury, when
working in dusty situations, wear
appropriate respiratory protection or use an
OSHA compliant dust extraction solution.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Impacts per Minute Under Load (IPM)
CUS
UL Listing for
Canada and U.S.
SPECIFICATIONS
Volts .............................................................. 18 DC
Battery Type .................................................M18™
Charger Type ................................................ M18™
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Cat. No. 2656-20
.....................................................
RPM ............................................................. 0-2750
IPM .............................................................. 0-3450
Cat. No. 2657-20
.....................................................
RPM ............................... High 0-2750 Low 0-2000
IPM ................................ High 0-3450 Low 0-2450
Cat. No. 2658-20
.....................................................
RPM ............................................................. 0-2450
IPM .............................................................. 0-3350
Cat. No. 2659-20
.....................................................
RPM ............................................................. 0-2450
IPM .............................................................. 0-3350
FUNCTIONAL DESCRIPTION
1. 1/4" Hex drive chuck
(2656-20, 2657-20))
2. LED
3. Control switch
4. Trigger
5. Speed control (2657-20)
6. Belt clip
7. Handle
8. 3/8" Square drive anvil (2658-20)
9. 1/2" Square drive anvil with pin detent (2659-20)
1
2
4
5
3
6
9
Cat. No. 2657-20
8
Cat. No.
2658-20
Cat. No.
2659-20
7
Product specificaties
| Merk: | Milwaukee |
| Categorie: | Schroefmachine |
| Model: | M18 2657-22 |
Heb je hulp nodig?
Als je hulp nodig hebt met Milwaukee M18 2657-22 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schroefmachine Milwaukee
14 Juli 2025
14 Juli 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
4 April 2025
4 April 2025
4 April 2025
4 April 2025
4 April 2025
Handleiding Schroefmachine
- Alpha Tools
- Draper
- Proviel
- NEO Tools
- Laserliner
- Cocraft
- HOTO
- DeWalt
- Bavaria
- Netter Vibration
- Facom
- AEG
- Greenworks
- Abac
- Gedore
Nieuwste handleidingen voor Schroefmachine
15 Juli 2025
15 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025