Milwaukee 2510-20 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee 2510-20 (16 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Cat. No. / No de cat.
48-59-2401
2510-20
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
New batteries must be
charged before rst use.
Le s b att eri e s ne u ves
doivent être chargées
av a nt le ur u til isation
initiale.
Las baterías nuevas se
deben cargar antes de
usarlas por primera vez.
M12 LI-ION BATTERY CHARGERS
M12 LI-ION BATTERY PACKS
CHARGEURS AU LI-ION M12
BATTERIE AU LI-ION M12
CARGADORS PARA BATERÍAS DE IONES
DE LITIO DE M12
BATERÍA DE IONES DE LITIO DE M12
2
1. SAVE THESE INSTRUCTIONS - THIS MAN-
UAL CONTAINS IMPORTANT SAFETY AND
OP E R AT I NG INS T R U CTION S FO R TH E
MILWAUKEE M12™ LI-ION BATTERIES AND
THE MILWAUKEE M12™ LI-ION BATTERY
CHARGER.
2.
BEFORE USING THE BATTERIES AND CHAR-
GER, READ THIS OPERATOR’S MANUAL,
YOUR TOOL OPERATOR’S MANUAL, AND ALL
LABELS ON THE BATTERY PACK, CHARGER
AND TOOL.
3.
CAUTION
TO REDUCE THE RISK OF IN-
JURY, CHARGE MILWAUKEE
M12™
LI-ION
BATTERIES ONLY IN MILWAUKEE
M12™
LI-ION
CHARGERS. Other types of char-
gers may cause personal injury or damage. Do
not wire a battery pack to a power supply plug or
car cigarette lighter. Batteries will be permanently
disabled or damaged.
4.
USE MILWAUKEE M12
LI-ION
BATTERIES
ONLY ON MILWAUKEE M12
LI-ION
TOOLS.
Use with other tools may result in a risk of re,
electric shock or personal injury.
5. AVOID DANGEROUS ENVIRONMENTS. Do not
charge battery pack in rain, snow, damp or wet
locations. Do not use battery pack or charger in
the presence of explosive atmospheres (gaseous
fumes, dust or flammable materials) because
sparks may be generated when inserting or remov-
ing battery pack, possibly causing re.
6. CHARGE IN A WELL VENTILATED AREA. Do
not block charger vents. Keep them clear to allow
proper ventilation. Do not allow smoking or open
ames near a charging battery pack. Vented gases
may explode.
7. MAINTAIN CHARGER CORD. When unplugging
charger, pull plug rather than cord to reduce the risk
of damage to the electrical plug and cord. Never car-
ry charger by its cord. Keep cord from heat, oil and
sharp edges. Make sure cord will not be stepped
on, tripped over or subjected to damage or stress.
Do not use charger with damaged cord or plug.
Have a damaged charger replaced immediately.
8. DO NOT USE AN EXTENSION CORD UNLESS IT
IS ABSOLUTELY NECESSARY. Using the wrong,
damaged or improperly wired extension cord could
result in the risk of re and electrical shock. If an
extension cord must be used, plug the charger
into a properly wired 16 gauge or larger extension
cord with pins that are the same number, size and
shape as the pins on the charger. Make sure that
the extension cord is in good electrical condition.
9.
CHARGER 48-59-2401 IS RATED FOR 120 VOLT
AC ONLY. CHARGER 2510-20 IS RATED FOR 12
VOLT DC AND 120 VOLT AC. Charger must be
plugged into an appropriate receptacle.
10. USE ONLY RECOMMENDED ATTACHMENTS.
Use of an attachment not recommended or sold
by the battery charger or battery pack manufac-
turer may result in a risk of re, electric shock or
personal injury.
11. UNPLUG CHARGER when not in use. Remove
battery packs from unplugged chargers.
12. TO REDUCE THE RISK OF ELECTRIC SHOCK,
always unplug charger before cleaning or mainte-
nance. Do not allow water to ow into AC/DC plug.
Use a Ground Fault Circuit Interrupter (GFCI) to
reduce shock hazards.
13. DO NOT BURN OR INCINERATE BATTERY
PACKS. Battery packs may explode, causing per-
sonal injury or damage. Toxic fumes and materials
are created when battery packs are burned.
14. DO NOT CRUSH, DROP, OR DAMAGE battery
pack. Do not use a battery pack or charger that
has received a sharp blow, been dropped, run
over, or damaged in any way (e.g., pierced with
a nail, hit with a hammer, stepped on).
15. DO NOT DISASSEMBLE. Incorrect reassembly
may result in the risk of electric shock, re or
exposure to battery chemicals. If it is damaged,
take it to a MILWAUKEE service facility.
16. BATTERY CHEMICALS CAUSE SERIOUS
BURNS. Never allow contact with skin, eyes, or
mouth. If a damaged battery pack leaks battery
chemicals, use rubber or neoprene gloves to dis-
pose of it. If skin is exposed to battery uids, wash
with soap and water and rinse with vinegar. If eyes
are exposed to battery chemicals, immediately
ush with water for 20 minutes and seek medical
attention. Remove and dispose of contaminated
clothing.
17. DO NOT SHORT CIRCUIT. A short-circuited
battery pack may cause re, personal injury, and
product damage. A battery pack will short circuit
if a metal object makes a connection between
the positive and negative contacts on the battery
pack. Do not place a battery pack near anything
that may cause a short circuit, such as coins, keys
or nails in your pocket.
18. DO NOT ALLOW FLUIDS TO FLOW INTO BAT-
TERY PACK. Corrosive or conductive uids, such
as seawater, certain industrial chemicals, and
bleach or bleach containing products, etc., can
cause a short circuit.
19. STORE YOUR BATTERY PACK AND CHARGER
in a cool, dry place. Do not store battery pack
where temperatures may exceed 120°F (50°C)
such as in direct sunlight, a vehicle or metal build-
ing during the summer.
READ AND SAVE
ALL INSTRUCTIONS
FOR FUTURE
REFERENCE.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all
instructions listed below, may result in electric shock, re and/or serious personal injury.
SAVE THESE INSTRUCTIONS
3
FUNCTIONAL
DESCRIPTION
1. Contacts
2. Release buttons
3. Vents
4. Bay
5. Light indicators - when a
battery pack is inserted into the
charger, the light will indicate
the following situations:
Continuous red: Charging
Continuous green: Charging complete
Flashing red: Battery pack is too hot/cold-
Charging will begin when battery
reaches correct charging temperature
Flashing red/green: Damaged or faulty battery pack
5
3
2
1
4
SYMBOLOGY
Volts
Direct Current
Alternating Current
Double Insulated
Properly Recycle Batteries
Hertz
Amps
mA Milliamps
UL Listing for Canada and U.S.
SPECIFICATIONS
Cat. No. 48-59-2401 ...............................................
Input Volts 120 AC ....................................................
Input Milliamps 750 AC.............................................
Output Volts 12 DC ..................................................
Output Amps 3.0 DC ................................................
Cat. No. 2510-20 ....................................................
Input Volts 120 AC ....................................................
Input Milliamps 750 AC.............................................
Input Volts 12 DC .....................................................
Input Amps................................................... 4.4 DC
Output Volts 12 DC ..................................................
Output Amps 3.0 DC ................................................
Recommended Ambient
Charging Temperature ................... 40°F to 105°F
M12™ Li-Ion Battery Packs ........................ 12 V DC
MILWAUKEE
12V LI-ION
BATTERY PACKS
WARNING
To reduce the risk of re, personal
injury, and product damage due to
a short circuit, never immerse your tool, battery
pack or charger in uid or allow a uid to ow
inside them. Corrosive or conductive uids, such
as seawater, certain industrial chemicals, and
bleach or bleach containing products, etc., can
cause a short circuit.
Maintenance and Storage
Do not expose your battery pack or cordless tools
to water or rain, or allow them to get wet. This could
damage the tool and battery pack. Do not use oil or
solvents to clean or lubricate your battery pack. The
plastic casing will become brittle and crack, causing
a risk of injury.
Store battery packs at room temperature away from
moisture. Do not store in damp locations where cor-
rosion of terminals may occur. As with other battery
pack types, permanent capacity loss can result if
the pack is stored for long periods of time at high
temperatures (over 120° F). MILWAUKEE Li-Ion
battery packs maintain their charge during storage
longer than other battery pack types. After about a
year of storage, charge the pack as normal.
WARNING
To reduce the risk of injury or ex-
plosion, never burn or incinerate a
battery pack even if it is damaged, dead or com-
pletely discharged. When burned, toxic fumes
and materials are created.
Disposing of MILWAUKEE Li-Ion
Battery Packs
MILWAUKEE Li-Ion battery packs are more environ-
mentally friendly than some other types of power tool
battery packs (e.g., nickel-cadmium). Always dispose
of your battery pack according to federal, state and
local regulations. Contact a recycling agency in your
area for recycling locations.
Even discharged battery packs contain some energy.
Before disposing, use electrical tape to cover the
terminals to prevent the battery pack from shorting,
which could cause a re or explosion.


Product specificaties

Merk: Milwaukee
Categorie: Batterij-oplader
Model: 2510-20

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee 2510-20 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Batterij-oplader Milwaukee

Handleiding Batterij-oplader

Nieuwste handleidingen voor Batterij-oplader