Mikrotik CRS812-8DS-2DQ-2DDQ-RM Handleiding

Bekijk gratis de handleiding van Mikrotik CRS812-8DS-2DQ-2DDQ-RM (5 pagina’s), behorend tot de categorie Schakelaar. Deze gids werd als nuttig beoordeeld door 19 mensen en kreeg gemiddeld 4.2 sterren uit 9 reviews. Heb je een vraag over Mikrotik CRS812-8DS-2DQ-2DDQ-RM of wil je andere gebruikers van dit product iets vragen? Stel een vraag

CRS812-8DS-2DQ-2DDQ-RM

CRS812-8DS-2DQ-2DDQ-RM

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing

accidents.

Ultimate disposal of this product should be handled according to all national laws and regulations.

The Installation of the equipment must comply with local and national electrical codes.

This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully before beginning installation. Failure to use the

correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.

This product is intended to be installed indoors. Keep this product away from water, fire, humidity or hot environments.

Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Read the installation instructions before connecting the system to the power source.

We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your

own risk!

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.

It is the customer's responsibility to follow local country regulations. All devices must be professionally installed.MikroTik

This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take

adequate measures

Quick start

Connect with your PC to any Ethernet port;

Connect the device to a power source;

Configure the IP settings of your network card to 192.168.88.2/24;

Use WebFig in a web browser or the "WinBox" configuration tool;https://mt.lv/winboxmultiple configuration methods are available to ensure

accessibility;

Openin a web browser to start setup. If the IP address is unavailable, use WinBox and choose the "Neighbors" tab to find the http://192.168.88.1

device. Proceed to connect using the MAC address. The username is "admin", and there is no password (or, for some models, check user and

wireless passwords on the sticker);

For a manual update, visit the products page atto find your product. The required packages are accessible under https://mikrotik.com/products

the "Support&Downloads" menu;

Upload downloaded packages to the WebFig or WinBox "Files" menu and reboot the device;

By upgrading your RouterOS software to the latest version, you can ensure optimal performance, stability, and security updates;

Set up your router password.

Mounting

Product specificaties