QNAP QSW-L2110-10T Handleiding
Pagina's 19 Schakelaar
Bekijk de handleiding van QNAP QSW-L2110-10T gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
Guía de Instalación Rápida
Guia de Instalação Rápida
QSW-L2110-2S8T and
QSW-L2110-10T
Quick Installation Guide
QSW-L2110-2S8T
QSW-L2110-10T
QSW-L2110-2S8T
PWR
SYSRST
12345678
910
QSW-L2110-10T
PWR
SYSRST
12345678
910
Package Contents
QSW-L2110-2S8T
PWR
SYSRST
12345678
910
Bracket screwschorsFoot padsAn
Quick installation guidePower supply
QSW-L2110-2S8T
QSW-L2110-10T
QSW-L2110-10T
PWR
SYS
RST
12345678
910
Note: After completing the conguration, make sure to restore your computer’s IP address to its original
settings.
EN
Default username : admin
Default password : QNAP Cloud Key
Important: Upon initial login, the system will prompt you to configure a new password. QNAP strongly
recommends setting a unique password to enhance system security and mitigate potential vulnerabilities.
Accessing and Logging In to the Switch Web User Interface
To access the QSW
-
L2110-2S8T/QSW
-
L2110-10T web interface, use the following default credentials:
By default, the QSW
-
L2110-2S8T/QSW
-
L2110-10T switch can operate as a DHCP client. When connected
to a network with a DHCP server, it automatically obtains an IP address. You can then use Qfinder Pro to
locate and access the switch’s web-based user interface.
If the network does not have a DHCP server, follow these steps:
1. Assign your computer an IP address on the same subnet, such as 169.254.100.102.
2. Connect the computer to the switch using an Ethernet cable.
3. Open a web browser and then enter the default IP address of the switch (169.254.100.101) to access the
interface.
Product specificaties
| Merk: | QNAP |
| Categorie: | Schakelaar |
| Model: | QSW-L2110-10T |
Heb je hulp nodig?
Als je hulp nodig hebt met QNAP QSW-L2110-10T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden