Mikoterm eTK 6÷36kW Handleiding

Mikoterm CV Ketel eTK 6÷36kW

Lees hieronder de 📖 handleiding in het Nederlandse voor Mikoterm eTK 6÷36kW (36 pagina's) in de categorie CV Ketel. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
Guidebook for installaon, handling and maintenance ENG
eTK 6÷36kW
Electric block-boiler for heating systems with thermoregulatory microprocessor
FU TK-e - /2004 22
Content
1. Description of symbols and instructions for safe work
2. Device data
2.1 Typology
2.1.1 Statement on compliance
2.1.2 Regular application
2.2 Instructions for mounting
2.3 Instructions for work
2.4 Anti-frost protection and inhibitors
2.5 Norms, regulations and standards
2.6 Tools, materials and auxiliary measures
2.7 Minimum distances and Inflammability of construction materials
2.8 Product description
2.9 Waste disposal
2.10 Scope of delivery
2.11 Factory data plate
2.12 Dimensions and technical data
2.12 Dimensions and technical data for boiler eTK .1
2.12 Technical data .2
3. Transportation
4. Device installing
4.1 Warnings before mounting
4.2 Distances
4.3 -mounting of front casing De
4.4 Boiler mounting
4.5 Hydraulic connections testing
4.6 Systems on which the Boiler can be connected
4.7 Installation filling with water and waterproof testing
4.7 Filling the boiler with water and testing sealing .1
4.7 Heating pump air emission and de-blocking .2
4.7 Boiler and installation air emission .3
5. Electrical connection
5.1 Positions of introducer for the introduction of the power cable
5.2 Connecting power (voltage) cable
5.3 Scheme for connecting power (voltage) cable
5.4 Connect boiler's external control (room thermostat)
5.5 Electrical schemes
6. Commissioning
6.1 Before commissioning
6.2 First start
6.3 Start-up log
7. Handling heating installation
7.1 Instruction for work
7.2 Overview of the elements to adjust
7.2.1 Device functions
7.2.2 Basic settings
7.3 Regulation of heating
7.3.1 Boiler temperature adjustment
7.3.2 Boiler power adjustment
7.3.3 Warnings for low temperature
7.3.4 Warnings for high temperature
7.3.5 Warning symbols and codes
7.3.6 Room temperature thermostat
7.3.7 Interruption of heating
7.4 Putting the boiler out of drive
8. Cleaning and maintenance
8.1 Boiler heating
8.2 Check the working pressure; add the water and air-vent
installations
8.3 Add the water and vent installation
8.4 Inspection and maintenance log
9. Environment protection / Waste disposal
10. Troubles and troubleshooting
11. Product data sheet (in accordance with EU regulation
no. 811/2013)
CONTENT
Electric shock danger is marked by lightning
symbol in warning triangle
Warnings in text are marked by gray triangle,
background warnings are framed
1.
Description of symbols and instructions for safe work
1.1
Description of symbols
1.2
Instructions for safe work
Warnings
The signal words at the beginning of the warning mean the
way and level of consequences if protective measures are not
applied
means that smaller material damages NOTE
may occur
means that smaller to middle injuries may CAUTION
occur
means that heavy injuries may occur WARNING
means that heavy injuries may occur DANGER
Important information
Important information, meaning no danger for people
and things, are marked by the symbol displayed in
the following text. These are limited by lines, above
and below the text
Further symbols
S
y
m
b
o
l
Meaning
Action step
Directives to other places in document or to
other documents
Enumeration
/
Entry from the list
Enumeration
/
Entry from the list
(
2.
)
Table 1
General safety instructions
Non-compliance with safety instructions may cause heavy
injuries or lethal outcomes and material damages and
environment pollution.
Electrical installation should be examined by an expert
prior to the device assembly.
All electric works should be performed by authorised
person in accordance with corresponding regulations.
Commissioning and maintenance and repairs should be
done by authorised service only.
Technical acceptance of installations should be performed
in accordance with corresponding regulations.
Danger because of disrespecting security rules in
alert situations, for example fire.
Never expose your-self to life danger. Own security always
has priority.
Damage occurred because of wrong handling
Wrong handling may lead to injuries of persons and/or
installation damage.
Make sure that device is available only toprofessionals.
Installation and commissioning, and maintenance and
repair, must be done only by service authorised for
electrical works.
Installation and commissioning
Placement of device can be done only by authorised
service.
Boiler can be turned on only if installation is with
corresponding pressure level and working pressure regular.
Do not close security valves in order to avoid damage caused
by too high pressure. During warming water can leak on
security valve of the hot water circuit and hot water pipes.
Install this device only in the room where freezing is not
possible to occur.
Do not store or dispose inflammable materials or liquids
in the vicinity of this device.
Keep safe distance in accordance with valid regulations.
Description of symbols and instructions for safe work


Product specificaties

Merk: Mikoterm
Categorie: CV Ketel
Model: eTK 6÷36kW

Heb je hulp nodig?

Als je hulp nodig hebt met Mikoterm eTK 6÷36kW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden