Micro Connect MC-HM-ET01ES Handleiding

Micro Connect AV extender MC-HM-ET01ES

Lees hieronder de 📖 handleiding in het Nederlandse voor Micro Connect MC-HM-ET01ES (1 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

HDMI2.0 HDBaseT Extender 100m

Over One Cat5e/6/7 Cable

Quick Installation Guide

Ver. 1.0

All brand names and trademarks are properties of

their respective owners

INTRODUCTION:

FEATURES:

3 4

SPECIFICATIONS:

● Supports the HDMI 2.0 specification over a single Cat.6/7 cable up to 70m/328ft

● Fully compliant with HDMI 1.4, and compatible with HDMI 2.0 (4K2K@60Hz with

RGB 4:4:4 ).

● Supports pass-through of HD audio formats: LPCM2/5.1/7.1 CH, Dolby Digital,

DTS, Dolby TrueHD, DTS-HD Master Audio and more.

● HDBaseT 5Play™ convergence: High-Definition (HD) Video and Audio, 100BaseT

Ethernet, 12V POC, and Control (Bi-directional IR/ RS-232 pass-through)

● HDMI with 3D & 4K@60Hz (YUV 4:2:0) support, DVI 1.0 compatible

● HDCP 2.2 compliant

● Supports pass-through of HD audio formats: LPCM 2.0/5.1/7.1, Bitstream, and HD

Bitstream

● Supports optical audio sampling rates up to 48kHz

● Supports external analog and digital audio extension including support for ARC

(Audio Return Channel)

● Supports RS-232 baud rates from 110~115200bps

This HDMI 2.0 Transmitter and Receiver set can send 4K2K@60Hz(YUV 4:4:4). video

and audio over a single Cat.5e/6/7 cable up to 70m, with Ethernet, RS-232 and IR

ports. Consequently HDBaseT is positioned to become the leading physical layer

Technology for last-leg wired connectivity between HD multimedia stream

sources(set-top-boxes, DVDs and PCs) and HD display monitors(Flat-panel LCD or

plasma HDTVs).

The integrated 12V POC support provides power to the receiver or transmitter from

thetransmitter or receiver , eliminating the need for a separate power supply for the

Receiver

● Blu-ray, DVD players and recorders

● Digital set-top-boxes (STBs)

● A/V receivers

● Game consoles

● PCs

● HDMI repeaters, splitters and switches

● DTVs, LCDs and plasma displays

● Rear and front projectors

HDMI version............................................ HDMI 2.0

HDCP version........................................... HDCP 2.2

Video Bandwidth....................................... 18G

HDMI resolution supported....................... 1920*1080@60Hz

1920*10803D@24Hz

1080P@120Hz

4K2K@30Hz

4K2K@60Hz(4:2:0)

4K2K@50/60Hz(4:4:4)

HDMI connector ....................................... Type A ,19 pin, Female

Operation temperaure .............................. 0 50℃～ ℃

Relative humidity....................................... 0 95%(no condensation)～

Power Supply............................................ DC 12V 2A

APPLICATIONS:

①HDBaseT OUT: Connect to the Receiver unit with a single CAT5e/6/7 cable for

transmission of all data signals includes power.

② IR OUT:Connect to the IR Blaster to transmit IR signals to devices within direct

line-of-sight of the IR Blaster.

③ IR IN:Connect to the IR Extender to extend the IR control range of remotely

located device. Ensure that the remote being used is within direct line-of-sight of the

IR Extender.

④ HDBaseT Active LED:This LED will flicker per second when device power on.

⑤ HDBaseT Link LED: This LED will illuminate when HDBaseT link is established

between transmitter and receiver.

⑥ DC 12V: Plug the 12V DC power supply into the unit and connect the adaptor to an

AC outlet.

① HDBaseT IN: Connect to the Receiver unit with a single CAT5e/6/7 cable for

transmission of all data signals includes power.

② IR OUT:Connect to the IR Blaster to transmit IR signals to devices within direct

line-of-sight of the IR Blaster.

③ IR IN:Connect to the IR Extender to extend the IR control range of remotely

located device. Ensure that the remote being used is within direct line-of-sight of the

IR Extender.

④ HDBaseT Active LED:This LED will flicker per second when device power on.

⑤ HDBaseT Link LED:This LED will illuminate when HDBaseT link is established

between transmitter and receiver.

⑥ DC 12V:Plug the 12V DC power supply into the unit and connect the adaptor to an

AC outlet.

① HDMI IN: Connects to HDMI source equipment such as a DVD or Blu-ray player.

② RS232:Connect to a PC or Laptop via RS232 terminal to D-Sub 9-pin cable for the

transmission of RS-232 commands.

③LAN:Connect to an Ethernet supporting device or to your local network as

appropriate.

① HDMI OUT: Connects to HDMI source equipment such as a DVD or Blu-ray player.

② RS232:Connect to a PC or Laptop via RS232 terminal to D-Sub 9-pin cable for the

transmission of RS-232 commands.

③LAN:Connect to an Ethernet supporting device or to your local network as

appropriate.

PRODUCT OVERVIEW: Receiver:

IR Cable Pin Assignment:

Transmitter:

LinkIR InIR Out

HDBaseT Out Active 12V/DC

LinkIR InIR Out

HDBaseT In Active 12V/DC

LANHDMI In RS232

LANHDMI Out RS232

Product specificaties

Merk:	Micro Connect
Categorie:	AV extender
Model:	MC-HM-ET01ES
Kleur van het product:	Zwart
Gewicht:	580 g
Gewicht verpakking:	665 g
Breedte verpakking:	175 mm
Diepte verpakking:	55 mm
Hoogte verpakking:	237 mm
Soort:	AV-zender & ontvanger
Stroom:	2 A
Connectiviteitstechnologie:	Bedraad
Maximum resolutie:	- Pixels
HDCP:	Ja
Aansluiting voor netstroomadapter:	Ja
3D:	Ja
HDMI versie:	2.0
HDMI in:	1
RJ-45 uitgang ports:	1
HDCP versie:	2.2
Bandbreedte:	18 Gbit/s
Aantal HDMI-uitgangen:	1
RJ-45 invoer ports:	1
Operating voltage:	12 V
HDBaseT-poort:	Ja
Maximaal bereik:	100 m
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Ondersteundende kabel types:	Cat5e, Cat6, Cat7