Metra DP-3021B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra DP-3021B (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
REV. 5/31/2017 DP-3021B
INSTALLATION INSTRUCTIONS FOR PART DP-3021B
METRA – The World’s best kits.®metraonline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
ISO DDIN radio provision
Pre-assembled cup holder
Pre-assembled pocket w/factory 12v outlet provision
Painted black to match the factory dash
A) Radio dash panel • B) Radio brackets • C) Drill template D) (4) #8 x 1/2” Phillips truss-head screws
20;-,(;<9,:
20;*64765,5;:
Panel removal tool • Phillips screwdriver
Metal cutting tool • 10mm socket wrench
9/32” socket wrench • T-15 Torx screwdriver
1/8” drill bit
;663:9,8<09,+
Chevrolet Corvette 1997-2004
DP-3021B
Table of Contents
A B C D
Dash Disassembly ..............................................2-3
Kit Preparation ....................................................... 4
Kit Assembly .......................................................... 5
>0905.(5;,55(*655,*;065:(sold separately)
Wiring Harness:XSVI-2004-NAV Antenna Adapter: 40-GM10
DP-3021B
2
Dash Disassembly
1. Open the center console door,
remove the (2) nut covers and the
(2) 10mm nuts exposed. (Figure A)
2. Pull up on the rear of the traction/
ride control switch panel to release
it, and then unplug and remove.
(Figure B)
3. Remove the (2) 10mm nuts
exposed. (Figure B)
4. Open the ashtray door, and then
remove the (1) Phillips screws
exposed. (Figure C)
5. Remove the ashtray, and then
remove the (1) 9/32 screw
exposed. (Figure C)
Continued on the next page
(Figure B)(Figure A) (Figure C)
DP-3021B
Dash Disassembly
3
(Figure D) (Figure F)(Figure E)
6. Unclip the small grille to the left
of the ignition switch, and then
remove the (1) 9/32 screw
exposed. (Figure D)
7. Unclip the radio dash panel starting
from the base of the center
console, unplug the cigarette
lighter, and then unclip and remove
the entire panel. (Figure E)
8. Remove the (2) 9/32” screws
securing the radio, and then
unplug and remove.
Convertibles only:
Remove the (2) T-15 Torx screws from
the top and the (2) T-15 Torx screws
from the lower sides securing the
center seat divider. Lift the seat divider
straight up to remove it. (Figure F)
Continue to Kit Preparation


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: DP-3021B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra DP-3021B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd