Metra 99-7860 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-7860 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
INSTALLATION INSTRUCTIONS FOR PART 99-7860
99-7860
APPLICATIONS
Honda Civic SI
2002-2005
(US Models Only)
KIT FEATURES
• DIN Head Unit Provision With Pocket
• ISO DIN Head Unit Provision With Pocket
• Stacked ISO Head Unit Provision
• Double DIN Head Unit Provision
• A) Single DIN Radio Housing • B) ISO Brackets • C) ISO Trim Plate
• D) Double DIN Trim Plate
KIT COMPONENTS
• Phillips Screwdriver • Offset Tool (Not Pictured)
1-800-221-0932
© COPYRIGHT 2002-2009 METRA ELECTRONICS CORPORATION
www.metraonline.com
A
TOOLS REQUIRED:
BC
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-1721 - Honda/Acura harness 1998-up
Antenna Adapter
• Not Required
D
Dash Disassembly
-
Honda Civic SI 2002-2005 . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 1
Kit Assembly
- DIN Head Unit Provision With Pocket . . . . . . . . . . . . . . . . . . . . . . . . . .2
- ISO Din Head Unit Provision With Pocket . . . . . . . . . . . . . . . . . . . . . . . 3
- Double Din Head Unit Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
- Stacked ISO Head Unit Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Final Assembly............................................6
TABLE OF CONTENTS
99-7860
*Note:
Refer also to the instructions included with the aftermarket radio.
K
NOWLEDGE IS
P
OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
99-7860 DASH DISASSEMBLY
Honda Civic SI 2002-2005
1
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
Remove the shift knob and unsnap
the shifter lever trim panel.
2
Using the offset tool remove (2) lower
bolts securing the center panel.
3
Unsnap and remove the dash trim
bezel and disconnect the wiring.
4
Remove (3) Philips screws securing
the climate control pod to the back of
the dash trim bezel and remove the
pod.
5
Remove (4) Phillips screws from each
side securing the factory head unit
and pocket to the bracket assembly
and remove.
6
NOTE: Removing the glove box and
the drivers side lower trim panel may
be necessary when removing the
shifter level trim panel when not
using an offset tool.
Continue to kit assembly.


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 99-7860

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-7860 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd